Settings Stopped error on Poco X2: How to Fix Settings Keep Crashing Problem?

A few numbers of Poco X2 users reported that they are facing a problem with their handset when they are trying to open the Settings option. It’s showing “Unfortunately, Settings Stopped”. The problem can occur if the Settings keeps stopping or crashing. In this article, we are going to discuss a few methods to Fix Settings Stopped error on Poco X2.

Well! There can be a number of reasons why this thing happens. This was a very common issue back in the time when the KitKat update was released. However, the problem is not always related to the software update, if you are struggling with the same issue and want to know what to do when Android Settings is not responding, you should read this post. More often than not, the error occurs after a series of freezes and lags because if it shows, it’s apparent that there’s a problem with the firmware.

It may seem like another app-related problem but it’s actually more complicated than you think. That’s why you need to address this problem immediately or as soon as the error starts showing up and your phone freezes and lags. In this post, I will walk you through in troubleshooting your Poco X2 that’s plagued with this problem so continue reading as this article may help you one way or another.

Poco X2

Open ‘Settings’ from either the Quick Nav menu or the launcher.
Scroll Down and Tap ‘Apps’.
Now, tap on ‘Manage Apps’
Tap the More settings icon (three-dot icon, upper right).
Tap ‘Show All Apps’.
Find and tap the app.
Tap Force Stop.

Simple Reboot or Forced Reboot

Well, I think you already know how to restart your phone. So just restart the device and see whether it solves the issue or not. Restarting a device is always an ultimate solution for any issue. Not only Poco but this applies to every electronic device. I used to tell my mom to restart her device if she faces any issue with her smartphone.

Well if you still need to know how to restart then, here is it: Press your phone’s power button. On the screen, tap Restart.

The other way of the reboot is as follows:

Press and hold the volume down button first and don’t let go.
Press and hold the power key while holding down the volume down button.
Keep both keys held down for 15 seconds or more.

If this doesn’t work then head to the next method. Rebooting your device regularly at least once every week can be beneficial.

Clear App Cache

If the above methods did not help, follow it up by clearing the apps’ cache. Here’s how it’s done:

Open ‘Settings’ from either the Quick Nav menu or the launcher.
Scroll Down and Tap ‘Apps’.
Now, tap on ‘Manage Apps’
If you’re looking for a system or default app, tap on More settings at the upper right (three-dot icon).
Tap ‘Show All Apps’.
Find and tap the appropriate app.
A popup window will appear with two options.
Tap the ‘Clear Cache’ button.
Restart the device and check for the problem.

Clear App Data

Clearing an app’s data will return it to its factory state.

Open ‘Settings’ from either the Quick Nav menu or the launcher.
Scroll Down and Tap ‘Apps’.
Now, tap on ‘Manage Apps’
If you’re looking for a system or default app, tap on More settings at the upper right (three-dot icon).
Tap ‘Show All Apps’.
Find and tap the appropriate app.
A popup window will appear with two options.
Tap the ‘Clear All Data’ button.
Restart the device and check for the problem.

Update Apps

To check for Play Store app updates:

Open Play Store app.
Tap More settings icon at the upper left (three horizontal lines).
Tap My apps & games.
Tap Update or Update All.

If you are on Cellular Data connection, we suggest that you update via wifi only to avoid additional charges. Here’s how:

Open Play Store app.
Tap More settings icon at the upper left (three horizontal lines).
Tap Settings.
Tap App download preference.
Select Over wifi only (select Over any network if you don’t have wifi).
Tap Done.

Make sure to also keep your apps updated all the time by enabling auto-update option.

Tap Auto-update apps.
Tap Over wifi only (select Over any network if you don’t have wifi).
Tap Done.

Install Latest Software Updates

Open ‘Settings’ from either the Quick Nav menu or the launcher.
Scroll Down and Tap ‘My Device’.
Then tap on ‘System Update’.
Tap on the ‘Check for updates’.
If a system update is available, you’ll see the option on the screen. Tap Download and Install.
If your system is up to date, you will see a message stating that the system is up to date.

Here are a few things that are needed to take care while updating your Poco X2 or any device:

Your device must be connected to the internet.
Your device must have enough space to download the update.
Your device should have enough charge, more than 50% to install the update.

Clear Cache from Recovery Mode

In case you don’t know what is recovery, the first thing the bootloader rings up is the recovery. Recovery Mode refers to a special bootable partition, which contains a recovery application installed in it. And you can fix some problems with your phone. Follow the steps to clear cache from recovery mode:

Turn off your phone.
Now Press and hold Volume UP key + Power Key on your Poco device simultaneously for a while
Once you see the Poco logo, you can release the button.
The phone is now booted in recovery mode
Use Volume keys to navigate to the Wipe cache partition option
To confirm, you can use the Power button.
Restart your phone

Troubleshoot apps in Safe Mode

In case you don’t know what is safe mode, in safe mode, the system temporarily disable all third-party applications you installed on your device. By doing this we can figure out which app is occurring the problem. Follow the below step to turn Safe Mode on:

Your device must be powered on.
Press the power button on the phone.
When the power off, restart, airplane mode, wifi mode, etc. menu will be displayed, release the power button.
Now, long-press the Power OFF word on the screen.
Keep pressing this word until the Android Safe Mode message is being displayed on your phone.
Select to reboot into Android Safe Mode.
When done, a dedicated Safe Mode watermark will be displayed on your smartphone
Observe the phone and check for the problem.

After figuring out the apps which are creating the problem, follow the below steps to uninstall it(if required):

Open ‘Settings’ from either the Quick Nav menu or the launcher.
Scroll Down and Tap ‘Apps’.
Now, tap on ‘Manage Apps’
If you’re looking for a system or default app, tap on More settings at the upper right (three-dot icon).
Tap ‘Show All Apps’.
Find and tap the appropriate app.
Tap Uninstall.
Tap OK to confirm.

Factory Reset

Disclaimer

Factory reset will delete everything, so you want to make sure that you create a copy of your data such as photos, videos, documents, texts, etc. ahead of time.

Open ‘Settings’ from either the Quick Nav menu or the launcher.
Scroll Down and Tap ‘My Device’.
Now again scroll down and tap ‘Backup & Reset’.
Now finally scroll till the end and tap ‘Erase all data (Factory Reset)’.
Now, tap on the ‘Delete all data’ button that is located at the center bottom of the screen.
Now, it will ask for your lock screen password, confirm it.
Again it will ask your Mi account password.
Enter the password and tap the Ok button.

From Recovery:

Turn off the device
Press and hold Volume Up key + Power Key
Release Power key when POCO logo appears but keep pressing Volume Up key
Release Volume Up key when Mi-Recovery Appears
Use Volume keys to select and Power key to confirm
Select Wipe Data and press power key to confirm
Select wipe all data and press power key to confirm
Select Confirm press power key to confirm
Select “back to main menu” by press power key
Select Reboot and press power key to confirm
Select Reboot to System and press the power key to confirm.

Conclusion

That was it, this was the easiest way to Fix when Netflix Stopped loading on my Poco X2. Follow them carefully to get benefits of the feature in your Poco X2. Are you facing any problems and issues with your Poco X2? Then there is nothing to worry about, we have an article dedicated to Poco X2’s issues and guides. Here is the Poco X2 Troubleshooting Guide. Although it’s rare, some cases of the issues on Poco devices may have bad hardware as the origin. If a factory reset won’t help in fixing your issue, visit your local Mi Store or Service Center so a qualified technician can examine the hardware. If needed, they may send it in for repair or replacement.

Do you own a Poco Device, or any Android device and need these types of simple tutorials? Then stay tunned to GetDroidTips’ Android Tips & Tricks column because many simple tutorials for Poco are coming soon.

If you have any queries regarding this, the comment section always available for you.

Poco X2 Troubleshooting Guide

Settings Stopped error on Poco X2: How to Fix Settings Keep Crashing Problem?

Fix, Settings Stopped error on Poco X2

Force Quit