Xiaomi Poco X4 GT Device Overview:
The Xiaomi Poco X4 GT features a 6.6-inch IPS LCD panel with a 144 Hz refresh rate. It is an FHD+ panel with a 1080 x 2460 pixels resolution and an aspect ratio of 20:9. Gorilla Glass protects the screen 5 and supports Dolby Vision. Under the hood, the MediaTek Dimensity 8100 processor is built on a 5 nm manufacturing process. It is an octa-core processor with four Cortex-A78 cores clocked at 2.85 GHz and four Cortex-A55 cores clocked at 2.0 GHz. For handling the graphics-intensive tasks, we have the Mali-G610 MC6. The smartphone has Android 12 out of the box with MIUI 13 skin running on top.
Regarding optics, we get a triple camera setup at the rear and a single selfie camera at the front. The triple rear camera setup consists of a 64 MP primary sensor with an f/1.9 lens, an 8 MP ultrawide sensor with an f/2.2 lens, and a 2 MP macro sensor with an f/2.4 lens. The selfie camera at the front is a 16 MP primary sensor paired with an f/2.5 lens. The rear camera system can shoot 4K videos at 30 fps, while the front camera is limited to 1080p video recording.
The smartphone has two storage options: 128GB internal storage + 8GB RAM and 256GB internal storage + 8GB RAM. We do not get a MicroSD slot for storage expansion. Regarding communications, we get Wi-Fi 802.11 a/b/g/n/ac/6, Bluetooth 5.3, GPS, NFC, Infrared port, and USB Type-C 2.0. And for sensors, we get a side-mounted fingerprint sensor, accelerometer, proximity, gyro, compass, and color spectrum. Powering it all is a 5080 mAh battery that can be topped up quickly using a 67W power adapter. The company claims the smartphone goes from 0 to 100% in just 46 minutes. The smartphone is available in three color options: Black, Blue, and Silver.
Flash HyperOS on Poco X4 GT using Fastboot
The all-new HyperOS is based on the Android 14 operating system out of the box and includes plenty of goodies, improved performance, enhanced security with hardware-level integration, dynamic visuals, and more. It’s meant to be an optimized version of MIUI without unnecessary bloatware and bugs that have ruined the user experience in the last couple of years. But not anymore!
It’s recommended to use any methods like TWRP Recovery or Fastboot to flash the firmware. Do keep in mind that both methods will wipe off all the data from your device. So, make sure to take a complete data backup from the device before getting into the steps.
Warning: GetDroidTips won’t be held responsible for any issue or error that might happen while/after following the steps below. You should know what you’re doing. So, do it at your own risk.
Requirements:
Step 1: Enable USB Debugging and OEM Unlocking
First, you’ll have to turn on USB Debugging and OEM Unlocking on your Xiaomi device by following the steps below. By doing so, your device will be recognized by the computer and you can proceed further in the Fastboot method. To do so:
- Open Settings on your Poco X4 GT.
- Go to About Phone > Tap on the MIUI version 7 times.
- It’ll enable the Developer Options menu on the handset.
- Now, go back to Settings menu > Search for Developer Options and open it.
- Enable the USB Debugging option.
- Turn On the OEM Unlock toggle > Hit Enable to confirm.
Step 2: Unlock Bootloader
It’s highly important to unlock the device bootloader as stock ROMs do come with a locked bootloader to ensure data privacy. As this is considered to be an unofficial ROM (custom ROM), you will need to unlock the device’s bootloader. Once unlocked, the system and data on your handset will become less secure & will be prone to malware attacks. Additionally, some internal features might not work properly such as Find device, added-value services, etc. Do remember that unlocking the bootloader can also void the manufacturer’s warranty.
- Download the Mi Unlock Tool on your computer.
- Extract the zip file and run the application.
- Now, sign in with your Mi Account. [You can also create a new one]
- Switch Off your phone manually > Long-press the Volume Down+Power buttons for a while.
- This will allow the handset to enter Fastboot mode.
- Next, connect your smartphone to the PC via a USB cable.
- Once the Mi Unlock Tool detects your connected handset, it’ll notify you.
- Click on Unlock and wait for it to complete.
- A confirmation pop-up will appear > Click on the Unlock anyway button.
- Your device data and settings will be wiped off.
- The unlocking process will take a while to complete.
- Once done, you’ll get a message that says “Unlocked successfully”.
- Finally, click on the Reboot phone button to restart your device.
- Disconnect the USB cable from the handset.
Step 3: Download Xiaomi HyperOS ROM
Next, you can select and download the latest Xiaomi HyperOS ROM for your respective device model using the links below, such as Xiaomi Poco X4 GT. The HyperOS recovery and fastboot ROM links are mentioned below, where you can either go with the recovery or fastboot ROM version to install.
Xiaomi Poco X4 GT HyperOS firmware Android 14:
| Software Version and Downloads |
Changelog |
| Europe Stable ROM:
|
- System
- Updated the security patch to April 2025. Increased system security.
|
| Global Stable ROM:
|
- System
- Updated the security patch to April 2025. Increased system security.
|
| India Stable ROM:
|
- System
- Updated the security patch to April 2025. Increased system security.
- Alive Design Philosophy
- Alive Design Philosophy unveils fresh, vibrant design across the whole system, making every interaction feel smooth and alive.
- All-new Gallery:
- With AI and reorganized collections, Gallery makes your memories even more vivid.
- All-new Weather
- Real-time Weather Engine 2.0 shows you the sky and clouds just like in real life – even lets you see rainbows and the Milky Way.
- All-new Calendar:
- The new Desktop calendar adds a touch of ritual to your day.
- All-new Clock:
- Updated Clock uses a more refined display structure for a more elegant, easy-to-read look.
- Updated animations:
- A full-scale animation upgrade makes every interaction flow smoothly and feel stable, responsive, and comfortable.
- Xiaomi HyperCore
- Upgraded rendering for multitasking extends battery life.
- Xiaomi HyperConnect
- Xiaomi HyperConnect offers upgraded device interconnectivity for a smoother experience.
- The upgraded cross-device camera allows you to use two cameras simultaneously for multi-angle live streaming.
|
| Europe Stable ROM:
|
- System
- Updated the security patch to March 2025. Increased system security.
- Alive Design Philosophy
- Alive Design Philosophy unveils fresh, vibrant design across the whole system, making every interaction feel smooth and alive.
- Xiaomi HyperCore
- Xiaomi HyperCore, Xiaomi’s proprietary core technology platform, enhances performance, graphics, network, and security.
- New dynamic memory:
- New technology allows precise resource allocation, so apps start up faster.
- Heterogeneous computing:
- Enhanced rendering pipeline boosts hardware performance for faster, more efficient visuals.
|
| Global Stable ROM:
|
- System
- Updated the security patch to March 2025. Increased system security.
- Alive Design Philosophy
- Alive Design Philosophy unveils fresh, vibrant design across the whole system, making every interaction feel smooth and alive.
- Xiaomi HyperCore
- Xiaomi HyperCore, Xiaomi’s proprietary core technology platform, enhances performance, graphics, network, and security.
- New dynamic memory:
- New technology allows precise resource allocation, so apps start up faster.
- Heterogeneous computing:
- Enhanced rendering pipeline boosts hardware performance for faster, more efficient visuals.
|
| Europe Stable ROM:
|
- System
- Updated the security patch to March 2025. Increased system security.
|
| Global Stable ROM:
|
- System
- Updated the security patch to March 2025. Increased system security.
|
| India Stable ROM:
|
- System
- Updated the security patch to March 2025. Increased system security.
|
| Europe Stable ROM:
|
- System
- Updated the security patch to October 2024. Increased system security.
|
| Global Stable ROM:
|
- System
- Updated the security patch to September 2024. Increased system security.
|
| India Stable ROM:
|
- System
- Updated the security patch to September 2024. Increased system security.
|
| Europe Stable ROM:
|
- System
- Optimization: New startup animation strategy reduces app launch delays
- Updated the security patch to July 2024. Increased system security.
|
| Global Stable ROM:
|
- System
- Optimization: New startup animation strategy reduces app launch delays
- Updated the security patch to July 2024. Increased system security.
|
| India Stable ROM:
|
- System
- Optimization: New startup animation strategy reduces app launch delays
- Updated the security patch to July 2024. Increased system security.
|
| Global Stable ROM:
|
- System
- Updated the security patch to June 2024. Increased system security.
|
| India Stable ROM:
|
- System
- Updated the security patch to May 2024. Increased system security.
- Vibrant aesthetics
- Global aesthetics draw inspiration from life itself and change the way your device looks and feels
- New animation language makes interactions with your device wholesome and intuitive
- Natural colors bring vibrancy and vitality to every corner of your device
- Our all-new system font supports multiple writing systems
- Redesigned Weather app not only gives you important information, but also shows you how it feels outside
- Notifications are focused on important information, presenting it to you in the most efficient way
- New Home screen icons refresh familiar items with new shapes and colors
- Multitasking is now even more straightforward and convenient with an upgraded multi-window interface
|
| Europe Stable ROM:
|
- System
- Updated the security patch to April 2024. Increased system security.
- Vibrant aesthetics
- Global aesthetics draw inspiration from life itself and change the way your device looks and feels
- New animation language makes interactions with your device wholesome and intuitive
- Natural colors bring vibrancy and vitality to every corner of your device
- Our all-new system font supports multiple writing systems
- Redesigned Weather app not only gives you important information, but also shows you how it feels outside
- Notifications are focused on important information, presenting it to you in the most efficient way
- Multitasking is now even more straightforward and convenient with an upgraded multi-window interface
|
| Global Stable ROM:
|
- System
- Updated the security patch to May 2024. Increased system security.
- Vibrant aesthetics
- Global aesthetics draw inspiration from life itself and change the way your device looks and feels
- New animation language makes interactions with your device wholesome and intuitive
- Natural colors bring vibrancy and vitality to every corner of your device
- Our all-new system font supports multiple writing systems
- Redesigned Weather app not only gives you important information, but also shows you how it feels outside
- Notifications are focused on important information, presenting it to you in the most efficient way
- Multitasking is now even more straightforward and convenient with an upgraded multi-window interface
|
Step 4: Boot to Fastboot Mode
You’ll have to boot your Xiaomi device to the Fastboot Mode to proceed with the firmware flashing. Check out the following steps.
- Connect your device to the PC via a USB cable.
- Make sure the USB Debugging option is already enabled.
- Go to the platform-tools installation folder on your PC.
- Type in CMD in the address bar and hit Enter to launch Command Prompt.
- Next, execute the command below to boot your device to Fastboot Mode:
adb reboot bootloader
- Once done, run the following command to check the fastboot connectivity with a Device ID:
fastboot devices
- In case, you’re not getting the device ID then install the Android USB Driver on the PC and try again.
Step 5: Flash HyperOS ROM via Fastboot
- Ensure you’ve already downloaded the ROM file on your computer.
- Now, double-click on the windows_fastboot_first_install_with_data_format.bat file to launch it.
- The firmware flashing process will start now.
- Please wait for it to complete. [Do not touch the device or data cable during the process]
- Once done, your Poco X4 GT will automatically boot to HyperOS.
- The first boot to the system might also take some time. So, have some patience.
- Go through the initial setup process to get into the home screen.
- You’re done. Enjoy!
Flash HyperOS on Poco X4 GT using Recovery
The main firmware flashing process will be different from the recovery method, but the initial requirements and steps will be almost the same as the fastboot method. That means even if you’re using the recovery method to install the HyperOS ROM on your Xiaomi device, you must follow the steps below.
Step 1: Requirements
- Install Android SDK Platform Tools on the PC.
- Charge the device more than 50%.
- Take a full data backup from the handset.
- You’ll require a computer and a stock USB data cable.
Step 2: Allow USB Debugging and OEM Unlocking
- Enable USB Debugging and OEM Unlocking using the above steps.
Step 3: Unlock Bootloader
- Unlock the device’s bootloader via the Mi Unlock Tool using the above steps.
Step 4: Download HyperOS ROM
- Download the HyperOS release firmware file on the PC. (links above)
- Transfer the ROM file to the device storage.
Step 5: Boot to Fastboot Mode
- Now, boot your Poco X4 GT to Fastboot Mode. (steps above)
- Follow the ROM flashing steps below once your handset is connected to fastboot.
Step 6: Flash HyperOS ROM via Recovery
Next, you’ll need to install a custom recovery like TWRP for your model compatible with the handset. This TWRP recovery will help you flash the Xiaomi HyperOS ROM quite easily. You can also use any other custom recovery tools like OrangeFox (if you want).
- Visit the TWRP official site and download the TWRP build corresponding to your device.
- If you can’t find the latest TWRP version, try visiting the XDA Forum to check for the same.
- Now, use the fastboot method to flash TWRP (.img or .zip) on the handset.
- Boot into the TWRP recovery menu > Tap on the Wipe button.
- Choose Factory reset > Slide the Swipe to Factory Reset option.
- Once the factory reset is completed, go back to the main menu.
- Here you’ll need to tap on the Install button.
- Head over to the downloaded firmware directory of your device storage.
- Tap and select the Recovery ROM zip file.
- Slide the Swipe to confirm Flash option.
- Wait for it to complete and then tap on the Reboot button.
- Now, your device will reboot automatically to HyperOS.
- The first time booting to the system might take a couple of minutes.
- Go through the initial setup process to get into the home screen.
- You’re good to go.
In conclusion, this guide has shown you the steps to successfully install HyperOS ROM on your Poco X4 GT. If you have any further questions or encounter any issues during the installation process, feel free to leave a comment below for assistance.
