How to Fix Xbox One Won’t Turn On But Makes Sound

What Are The Reasons Xbox One Won’t Turn on?

There could be anything behind this problem, as it’s totally a technical fault, and you cannot just fix it yourself. But, if the reasons for this issue are these, then you can surely fix it:

Chances are there that you may face this problem because your Xbox One cables are damaged due to which it doesn’t get a proper power supply, resulting in shutting down. The same can occur if you are using a power supply kit that isn’t compatible with Xbox.
The overheating issue can also be the main culprit behind why your console won’t turn on, but you heard the rebooting sound. This occurs due to improper ventilation and as the air circulation is not properly conducted to cool the console.
The power source you are using may have a fault, which is causing this issue. It can be a faulty switchboard, UPS, or anything that gives you access to power up your console.
As we have already mentioned in this article, there are high chances that your Xbox One’s motherboard may be damaged, preventing it from turning on. In this case, you have no other option than to go to the Xbox service centre and have the damaged part replaced.
Sometimes, connected peripheral devices may also cause this kind of error. So, if you have connected any external device to your Xbox One, disconnect it and check if it helps.

Best Fixes If Xbox One Won’t Turn On But Makes Sound

If you find that there might be multiple reasons why your Xbox One won’t turn on but makes sound using the above-mentioned reasons, then you can try out these fixes to troubleshoot it:

Fix 1: Press the Eject Button

Although this sounds absurd, it is one method you can use to try and power up your Xbox One. On your Xbox One, simply hold down the Eject button.

If you are wondering why you mash the eject button, here are a few reasons. You must force the Xbox to eject the disc every time you press the eject button.

It is expected that the Xbox software will eventually turn on itself if this task is repeated several times.

It may be necessary to press the eject button at least 10 to 15 times. When you try a few times, the Xbox should eventually start up.

Fix 2: Power Cycle the Xbox

It is quite easy to power cycle the Xbox One. To perform a power cycle, follow these steps:

Plug your Xbox into a power source.
For at least 10 seconds, press and hold the power button.
Now that the console has been reset, it will begin to perform a reset immediately. Also, it will shut itself off.
When your power brick is turned on, the LED light on the front will turn white instead of orange.
When the power brick indicator turns dark orange, it indicates the power cycle is complete.
It’s now time to turn on your Xbox One. Hopefully, it will start up immediately.

Fix 3: Disconnect All the Cables

Your Xbox’s power supply does not need to be removed. Essentially, you must disconnect all cables from the Xbox for 15 seconds in order to reset the power supply.

Once you’ve waited 15 seconds, reconnect your cables, and then switch on your Xbox One. You should be able to turn it on right away.

Fix 4: Force Restart Xbox One

If you are unable to power up the Xbox after power cycling, you will have to forcefully restart it. Here are the steps you need to follow.

Connect your Xbox to a power source.
You must now hold down the sync, eject, and power buttons simultaneously for 10 seconds.
Press and hold the eject button for 10 seconds.
When 15 seconds have passed, release all the buttons you’ve been pressing.
Lastly, press the power button and the sync button together for a few seconds. You should be able to start your Xbox One right away.
In the unlikely event that it does not power up, press the power button repeatedly and the sync button repeatedly. Hopefully, the console will now power on by itself.

Fix 5: Remove All Connected Devices from the Xbox

If the Xbox is not drawing enough power to power up all the connected devices, you can simply power down your Xbox and remove all the devices from it.

You should wait for a few seconds before turning it back on once it has been disconnected. It should normally start up when your Xbox is turned on. Once you are done, you can reconnect all of your devices to Xbox.

Fix 6: Insert a Game Disc into the Xbox

In addition to fully plugging your Xbox One in, you can partially insert your game disc as well. You just need to turn on the Xbox and wait for the beeping to start.

Once the Xbox has begun to beep, insert the disc. For the game disc to be read, it needs to be forced to power up. Hopefully, this will work right away, though you may have to try a few times before it does.

Fix 7: Replace Cables And Power Brick

It would actually be best to get yourself a power brick and replacement cables. This can help you determine whether the issue is with your Xbox or if the cables are simply worn out or corroded.

Fix 8: Wait for a Few Minutes

Overheating might be the cause of your Xbox One not turning but making a beeping sound if it is overheating, as mentioned in one of the reasons.

This can be resolved by turning off the device and waiting for about 10 minutes. Once the device has cooled down, turn it on to solve your issue. Next, move on to the next fix if the first doesn’t work.

Fix 9: Switch Output Ports on Your TV

It is also possible for one of the display ports to be malfunctioning. Hence, you should disconnect your HDMI cable from your TV and connect it to whichever HDMI port is available.

Usually, Xbox games will only start if the display is working. You should also inspect your cable routing for loose connections or physical damage.

Fix 10: Check For Power Cord Pins

The power supply pins at the back of your Xbox may have a problem, such as dirt or bends. If your pins are bent, clean them and make sure there is no dust. Once both elements have been fixed, you should be able to power up your Xbox immediately.

Fix 11: Get The Motherboard Checked

It is possible for moisture to build up on the Xbox motherboard from a problem with the inner liquid cooling system. Game consoles often display this problem when kept in a cold area and then turned on, or when they are kept in extremely moist areas.

No matter how moisture gets onto a motherboard, it can cause a variety of problems, such as a complete failure to start or a beeping sound but no power. In addition, moisture on a motherboard can cause sparks and short circuits if it exceeds a certain level.

Whenever the motherboard is damaged by liquid, seek professional assistance. Depending on the severity of the damage, they will replace the motherboard or repair it if it is permanent.

Fix 12: Replace the Xbox One

It may be that your Xbox needs to be serviced if none of these steps work for you. In order to make sure your console is in good working order, you should take it to an authorized service center.

If you do not know what you are doing, do not attempt to open the Xbox. There are two possibilities: the motherboard is faulty, or the power supply fails.

So, that’s all we have for you on how to fix the Xbox One, which won’t turn on but makes sound. It’s our hope that this guide has helped you. For more info, comment below.