In some cases, the EV’s software version might become outdated for a while and the older version can eventually trigger charging-related issues a lot. But you don’t need to worry about it because there are some workarounds provided below.
Steps to Fix Hyundai Kona Not Charging
Luckily, here we’ve shared with you a couple of troubleshooting methods below that should come in handy. It’s better to follow all methods one by one until the problem gets fixed. So, without wasting any more time.
1. Reboot Your Hyundai Kona EV
First of all, you should try rebooting the Hyundai Kona EV manually by yourself using the following steps below. Sometimes rebooting the electric vehicle did fix multiple temporary issues or glitches completely.
There is a small push-in button on the lower front right corner of the dashboard unit. When the car engine is turned on, try using a paperclip or a ballpoint pen and long-press the push-in button for around 30 seconds. Wait for the EV to reboot the unit and then you’ll be good to go again.
2. Try Charging the Battery When It’s Low
Some reports are claiming that charging the battery under 10% did fix the charging-related issues up to some extent. It’s also worth mentioning that the charging speed will become faster enough. might increase drastically. So, you can also try charging the battery pack whenever the charging level is under 10% to ensure this method worked every time.
You can change your Hyundai Kona with a Type 2 connector at home, work, or at a public charging point. There is also a CCS connector for rapid charging.
3. Check for the Temperature of the Battery Pack
If in case, the battery temperature is too hot in terms of the ambient weather temperature then you can park the car in another place to cool it down. The overheated battery temperature can cause issues with the stopped charging or slow charging whatsoever. It’s typically recommended to keep the battery temperature optimal for better charging.
4. Check the Weather Temperature
Ensure to cross-check the ambient weather temperature at your place or area whether the temperature is overheating. Your EV might limit the battery charging if the weather is too hot or too cold.
5. Try Using A Different Charging Station
You can try using a different charging station to ensure there is no issue with the charging station. Keep checking at multiple charging stations to ensure there is no issue with the charging speeds. If the charging speed is better at different stations then continue using that charging station.
It might also be possible that somehow the input voltage is too high or too low. So, you should consult an electrician to ensure the required voltage on the circuit breaker.
7. Try Reconnecting the Charging Cable
The Hyundai Kona electric vehicle may often face charging issues when the charger is connected at the wrong angle or the charging cable has some dirt/moisture. While sometimes it can occur if the charging port is physically damaged. You can follow the steps below to recognize the charger.
- Remove the charging cable from the charging port.
- Now, close the charging hatch > Start your charging process again.
- If it doesn’t fix the issue, you can try checking for any dirt/dust that might be entered into the cable or the port.
- Remove the cable from the port and try to reconnect it.
- In the worst scenarios, you can try changing the charging port to avoid physical damage whatsoever.
8. Physically Damaged Battery
Another thing you should do is check out if the battery is physically damaged from the inside or not. If the battery is damaged, it’ll definitely cause charging issues. Contact the service center for further assistance.
9. The Circuit Breaker is Tripped
Well, you may also get into an unexpected issue where the circuit breaker of the Kona EV is tripped for some reason. So, it’ll turn off, and you should check which circuit is feeding from the outlet. Make sure to contact an electrician to check for the wiring and fix the circuit breaker. When it comes to electric cars, one of the most common concerns people have is that they don’t seem to be charging as fast as they thought.
10. Reset the System
If none of the workarounds did fix the charging issue for you then make sure to reset the system on your Hyundai Kona EV by following the steps below to ensure the system is running fine. To do so:
- Though you can use the user manual for your particular model, Hyundai offers a dedicated reset button.
- Just press the RESET button using a paperclip or pin for a few seconds.
- Wait for the system to reset and you’ll be good to go.
That’s it, guys. We assume this guide was helpful to you. For further queries, you can comment below.
