UMIDIGI Bison X10G / X10G NFC Firmware Flash File (Stock ROM)

Are you looking to install a firmware file on UMIDIGI Bison X10G and UMIDIGI Bison X10G NFC? Then you are just in the right place. In this post, we have brought you the latest stock firmware for the UMIDIGI Bison X10G / NFC.

These days installing custom ROMs, rooting the device is a pretty common scenario among smartphone enthusiasts. However, not every day is a sunny day. Usually, while customizing your device you may have performed some wrong steps and ended up with a bricked device or a phone stuck in the endless boot loop. Sometimes the new custom OS you install brings a lot of unforeseen bugs. So, the only solution is to take the device back to its previous state. This technically means flashing the stock firmware on the smartphone.

Talking of the UMIDIGI Bison X10G / NFC, we have put up the latest stock firmware of the phone along with the flash tool and a complete tutorial to help you install the stock ROM correctly on the device. We have laid out all the instructions in a simple and detailed manner. So, it should be a cakewalk for you to install stock ROM on UMIDIGI Bison X10G / NFC.

How to Install Stock ROM on UMIDIGI Bison X10G / NFC?

Installing a stock ROM is pretty easy. All you have to do is download the stock ROM for the corresponding device. Then grab the USB drivers, an exclusive flash tool that we will use for performing the installation. Talking of the flash tool, we are using the Spreadtrum Flash tool in this guide because the UMIDIGI Bison X10G / NFC runs on the Spreadtrum chipset.

You will also require some other tools which we have listed out below. You have to download and install them as instructed. Before getting on towards the installation, let’s find out the importance of stock ROM.

Why Stock ROM is important.?

A stock ROM is an OS which the device runs when it’s unboxed. It’s the pre-built operating system. So, by flashing the firmware, you would literally take back the device to its original working state.