Tecno Spark 8T KG6p Firmware Flash File | Stock ROM (Android 11.0)

In this tutorial, we will guide you on how to install the firmware flash file on Tecno Spark 8T KG6p. The device came out of the box with Android 11.0 (HIOS 7.6) and was powered by MediaTek MT6765G Helio G35. If you are someone who is looking to fix your device’s common issues like boot loop, remove pattern lock, bypass FRP lock, repair IMEI, or extract DA (download agent) file, then this guide is for you.

To install the firmware flash file on Tecno Spark 8T KG6p, you need to download the software called SP Flash tool (also known as Smartphone flash tool). This method is simple and easy. We have also added video and step-by-step tutorials to make things easier to flash the firmware file.

Advantages of Stock ROM:

Here are the answers to why you need to download and save the Tecno Spark 8T Stock ROM flash file on your computer.

• If your device is dead, you can unbrick using the Stock ROM file
• You can fix or repair the IMEI on your device using DB files from Stock ROM
• Remove any malware or Adwares from Tecno Spark 8T
• You can fix the boot loop issue on Tecno Spark 8T
• Fix Unfortunately, the app has stopped errors on Tecno Spark 8T
• Fix Network related issue
• Patch Boot image to Root using Magisk: Mediatek Guide or Spreadtrum Guide
• You can unroot Tecno Spark 8T
• To Reset or Remove FRP on your device: Mediatek FRP Guide or Spreadtrum FRP Guide
• Restore Tecno Spark 8T back to Factory State
• Bypass Pattern lock on your device

How to Flash Tecno Spark 8T KG6p Firmware File

Before installing the Stock ROM on your Tecno Spark 8T, you should download the firmware flash file. Then download and install the USB Drivers and flash tool on the PC as well. Once you’re done with these, you can proceed to the steps below. But let’s take a quick look at the Stock Firmware importance and firmware details below.

Pre-Requirements:

• Supported device: Tecno Spark 8T KG6p
• Make sure to charge your device more than 50%
• You need a PC or Laptop with a USB cable.
• Take a complete backup of your android phone
• Download Drivers and Tools: VCOM drivers, SP Flash Tool, and Tecno USB Drivers

Download Flash Files

Instructions to Install: via SP Flash tool

Now, without wasting any more time, let’s jump into the firmware installation steps below:

1. Make sure you follow and download all the required files and flash tools on your PC.
2. Open the flash tool exe file to open the SP Flash Tool User Interface
3. Tap on the Download option and load both the download agent and the scatter text file in the scatter-loading section.
4. Once you load the file, click the Download button
5. To start the upgrade process of stock ROM on your Tecno Spark 8T, you need to turn off your device and hold the Volume Down and Volume Up key together and Connect your Phone to PC/Laptop using USB Cable (Keep the Volume Down and Volume Up button until your computer detects the phone.)
6. When the phone connects, your device will start upgrading the stock firmware
7. Wait for a few minutes, If you see a green button on your flash tool which means the upgrading process has been completed.
8. That’s it! You can reboot your Tecno Spark 8T

Follow Complete Tutorial

Watch Video Tutorial

That’s it, guys. We hope that you’ve installed the Stock Firmware on your Tecno Spark 8T KG6p device successfully. Feel free to ask in the comments below for any queries.