Tecno Pop 5 BD2 / BD2p DA File | Download Scatter Boot Auth File

Download Link:

• Tecno Pop 5 (BD2 / BD2p) DA File
  (File contains: mtk_allinone_da.bin)
• Download SP Flash Tool

Pre-requirements:

• This DA file is supported for the Tecno Pop 5 devices only.
• You’ve to download the DA file for your Tecno Pop 5 devices from the link above.
• A PC/Laptop and a USB cable are required.

Steps to Install Tecno Pop 5 (BD2 / BD2p) DA File

Method 01: Use NCK Box

• Download NCK Pro Box | NCK Pro Box Drivers – Install both on your PC
• Launch the NCK box on your PC > Click on FRP-PATTERN-PRIVACY-RESET.
• Click to select Custom Loader.
• Then head over to the DA file and select the downloaded DA file.
• Click on Flash Mode.
• Next, open NCK Loader > Click on Settings.
• Head over to the DA file and select the downloaded DA file.
• Go back to the Service tab > Click on Reset.0
• Y0ur Tecno Pop 5 will now reboot with a reset FRP lock system

For a complete step by step guide on how to install DA files using NCK Pro Box

Method 02: Use SP Flash Tool

• Launch the SP Flash Tool on your PC.
• Click on the Download tab.
• Click on the Choose option and select the downloaded DA file.
• The DA file will load automatically and install.

For a complete step by step guide on how to install the DA file using the SP Flash tool

Method 03: Use Miracle Box

For a complete step by step guide on how to install the DA file using Miracle Box

That’s it, guys. We hope you’ve successfully installed the DA file on your Tecno Pop 5 (BD2 / BD2p) devices. For any queries, feel free to ask in the comments below.