Tecno Pop 4 BC2 DA File | Download MTK Secure Boot Auth File

On this page, we will guide you on how to download and install the Tecno Pop 4 BC2 DA files. DA file also known as the Download Agent file is a file that helps in fixing the device secure boot error. If you are using the Tecno Pop 4 BC2 and facing any issues such as FRP lock, corrupted memory, secure boot error, authentication, or buffer error.

To flash the Secure Boot DA file on your Tecno Pop 4 BC2, you need flash tools like SP Flash Tool, NCK Box, Miracle Box, or CM2 box. Follow our step-by-step guide to install the Download Agent (DA) files for your Tecno Pop 4 BC2.

Advantages of Download Agent Loader Files

• Bypass Factory Reset Protection (FRP Lock) on the Tecno Pop 4
• System Image backup of the Tecno Pop 4
• Read security codes of an MTK device
• Can flash new firmware on a Tecno Pop 4
• Clone a Recovery Image or boot files

Pre-requirements:

• This DA file is supported for the Tecno Pop 4 devices only.
• You’ve to download the DA file for your Tecno Pop 4 device from the link above.
• A PC/Laptop and a USB cable are required.

Steps to Install Tecno Pop 4 DA File

Method 01: Use NCK Box

• Download NCK Pro Box | NCK Pro Box Drivers – Install both on your PC
• Launch the NCK box on your PC > Click on FRP-PATTERN-PRIVACY-RESET.
• Click to select Custom Loader.
• Then head over to the DA file and select the downloaded DA file.
• Click on Flash Mode.
• Next, open NCK Loader > Click on Settings.
• Head over to the DA file and select the downloaded DA file.
• Go back to the Service tab > Click on Reset.0
• Y0ur Tecno Pop 4 BC2 will now reboot with a reset FRP lock system

For a complete step by step guide on how to install DA file using NCK Pro Box

Method 02: Use SP Flash Tool

• Launch the SP Flash Tool on your PC.
• Click on the Download tab.
• Click on the Choose option and select the downloaded DA file.
• The DA file will load automatically and install.

For a complete step by step guide on how to install the DA file using the SP Flash tool