Tecno Pop 2 B1/B1S DA File | Download MTK Secure Boot Auth File

If you’re using the Tecno Pop 2 B1/B1S device and facing issues like authentication or buffer error, you will need to fix it via the SP Flash Tool or Miracle Box, or CM2 box. But if you don’t fix it, you will encounter a secure boot error. In order to flash those devices, you will require a Secure Boot DA file. Here you can download and install Tecno Pop 2 MTK Secure Boot DA file.

If your MediaTek powered Android device got corrupted or bricked, you will require a Download Agent file (Also known as DA File) to access its onboard storage and fix it. Here in this guide, we will share with you the steps to install the Download Agent (DA) files for your Tecno Pop 2 B1/B1S.

Tecno Pop 2 B1 DA File | Download MTK Secure Boot Auth File

Advantages of Download Agent Loader Files

Bypass Factory Reset Protection (FRP Lock) on the Tecno Pop 2
System Image backup of the Tecno Pop 2
Read security codes of an MTK device
Can flash new firmware on a Tecno Pop 2
Clone a Recovery Image or boot files

Disclaimer:

GetDroidTips won’t be responsible for any kind of damage or error that will occur on your device by following this guide or flashing any file. Proceed at your own risk.

Download Link:

Tecno Pop 2 B1 DA File | Tecno Pop 2 B1S DA File
(File contains: mtk_allinone_da.bin)
Download SP Flash Tool

Pre-requirements:

This DA file is supported for the Tecno Pop 2 B1/B1S device only.
You’ve to download the DA file for your Tecno Pop 2 device from the link above.
A PC/Laptop and a USB cable are required.

Steps to Install Tecno Pop 2 B1/B1S DA File

Method 01: Use NCK Box

Download NCK Pro Box | NCK Pro Box Drivers – Install both on your PC
Launch the NCK box on your PC > Click on FRP-PATTERN-PRIVACY-RESET.
Click to select Custom Loader.
Then head over to the DA file and select the downloaded DA file.
Click on Flash Mode.
Next, open NCK Loader > Click on Settings.
Head over to the DA file and select the downloaded DA file.
Go back to the Service tab > Click on Reset.0
Y0ur Tecno Pop 2 will now reboot with reset FRP lock system

For a complete step by step guide on how to install DA file using NCK Pro Box

Method 02: Use SP Flash Tool

Launch the SP Flash Tool on your PC.
Click on the Download tab.
Click on the Choose option and select the downloaded DA file.
The DA file will load automatically and install it.

For a complete step by step guide on how to install the DA file using the SP Flash tool