If you’re using the Tecno Camon 15 Pro CD8 device and facing issues like authentication or buffer error, you will need to fix it via the SP Flash Tool or Miracle Box, or CM2 box. But if you don’t fix it, you will encounter a secure boot error. In order to flash those devices, you will require a Secure Boot DA file. Here you can download and install Tecno Camon 15 Pro CD8 MTK Secure Boot DA file.
If your MediaTek powered Android device got corrupted or bricked, you will require a Download Agent file (Also known as DA File) to access its onboard storage and fix it. Here in this guide, we will share with you the steps to install the Download Agent (DA) files for your Tecno Camon 15 Pro CD8.
Advantages of Download Agent Loader Files
- Bypass Factory Reset Protection (FRP Lock) on the Tecno Camon 15 Pro
- System Image backup of the Tecno Camon 15 Pro CD8
- Read security codes of an MTK device
- Can flash new firmware on a Tecno Camon 15 Pro
- Clone a Recovery Image or boot files
Disclaimer:
Download Link:
- Tecno Camon 15 Pro DA File
(File contains: mtk_allinone_da.bin) - Download SP Flash Tool
Pre-requirements:
- This DA file is supported for the Tecno Camon 15 Pro CD8 device only.
- You’ve to download the DA file for your Tecno Camon 15 Pro device from the link above.
- A PC/Laptop and a USB cable are required.
Steps to Install Tecno Camon 15 Pro CD8 DA File
Method 01: Use NCK Box
- Download NCK Pro Box | NCK Pro Box Drivers – Install both on your PC
- Launch the NCK box on your PC > Click on FRP-PATTERN-PRIVACY-RESET.
- Click to select Custom Loader.
- Then head over to the DA file and select the downloaded DA file.
- Click on Flash Mode.
- Next, open NCK Loader > Click on Settings.
- Head over to the DA file and select the downloaded DA file.
- Go back to the Service tab > Click on Reset.0
- Y0ur Tecno Camon 15 Pro will now reboot with reset FRP lock system
For a complete step by step guide on how to install DA file using NCK Pro Box
Method 02: Use SP Flash Tool
- Launch the SP Flash Tool on your PC.
- Click on the Download tab.
- Click on the Choose option and select the downloaded DA file.
- The DA file will load automatically and install it.
For a complete step by step guide on how to install the DA file using the SP Flash tool