In terms of the camera specs, the Moto G7 Power packs a 12MP rear camera with f/2.0 aperture along with an LED flash and an 8MP selfie shooter on the front side. It has the f/2.2 aperture lens and supports AI Face Unlock option. The handset runs on Android 9.0 Pie with Stock Android UI out-of-the-box. While the device has a massive 5,000 mAh battery capacity with proprietary fast charging support.
The Dual Nano-SIM supported device features Wi-Fi 802.11 a/b/g/n, GPS, Bluetooth v4.20, USB Type-C, FM radio, 3G/4G LTE, and more. While it also supports some of the major sensors like accelerometer, ambient light, compass, gyro, proximity, and a rear-mounted fingerprint sensor.
T-Mobile Moto G7 Power Software Update:
We have mentioned the software update version with release date and changelog. The list will be updated soon with the new version when available.
| Software Version |
Release Date |
What’s New |
| Android 9 Pie
Build number: PCO29.114-63 |
April 26, 2019 |
Enhance System Performance and Bug Fixes |
| Build number: PCO29.114-54-2
Download Link Here |
April 26, 2019 |
Initial Firmware |
Steps to Install T-Mobile Moto G7 Power Stock Firmware:
Before going to the installation process, make sure to follow all the pre-requirements and install all the necessary drivers and tools on your PC.
Pre-Requirements:
- ROM supported: T-Mobile Moto G7 Power only. Don’t try it on other devices.
- A PC/Laptop and a USB Cable is required.
- Download and Install the latest Motorola USB Drivers for PC.
- Download and extract the ADB fastboot tool on your PC (Fastboot Method).
- Charge your device battery up to 60% at least.
- Take a full backup (no root) of your device.
GetDroidTips won’t be responsible for any kind of damage or error occurs to your device while/after following this guide. Do it at your own risk.
Guide to Install: via ADB Sideload Method (T-Mobile Moto G7 Power Software Update)
- Now, navigate to the folder where you’ve extracted the ADB and Fastboot Tools.
- We assume that you have already downloaded the Stock ROM file. Now, move it into the ADB folder on your PC.
- Restart your handset into Stock Recovery Mode.
- Select Apply Update from ADB from the Stock Recovery mode.
- Next, connect your phone with the PC via a USB cable.
- Open the CMD window by pressing Shift key + right mouse click.
- Now, type the below command and press enter:
adb sideload Filename.zip
- The installation process may take a few seconds or more. You have to wait for it.
- After the complete installation, reboot the device.
T-Mobile Moto G7 Power Software Update via Recovery (Manually)
- Go to the device Settings > About Phone > Tap on Build Number 7 Times to enable Developer options.
- Next, go to the Developer Options > Enable USB Debugging.
- After downloading the firmware file, move it to the device internal storage.
- Now, reboot into Stock Recovery Mode.
- Select Apply Update from SD card.
- Choose the downloaded zip file from SD card.
- Wait until the installation process completes and then reboot the device.
We hope that you’ve successfully installed or updated the Stock Firmware on T-Mobile Moto G7 Power smartphone easily.
