To install the Stock Firmware on Vizio XR6M10 Smartcast, Please follow the guide and download the ROM and QPST on your computer. This guide is for How to Install Stock ROM on Vizio XR6M10 Smartcast smartphone.
The Advantage Of Stock Firmware:
- Flash Stock To Unbrick your Vizio XR6M10 Smartcast
- Flash Stock ROM to Fix the Bootloop problem
- Upgrade and Downgrade Vizio XR6M10 Smartcast
- Unroot or Fix Bugs on your phone
- To fix the lag or stutter on Vizio XR6M10 Smartcast
- By flashing Stock ROM, you can solve software problems.
- Revert back to stock to gain your warranty.
READ THIS CAUTION:
So before jump into the manual upgradation setup, please make sure you have a good amount juice with at least 80% Charge. If not please charge the phone. Backup your phone in case if you need it later. If you brick the device we are not responsible. Do it at your own risk. Remember this guide is to update Stock ROM.
CHECK POPULAR POST
RELATED POST
Required Files
Stock ROM (XR6M10.03.99.01.04.zip)
Download QPST
PREREQUISITE :
- THis guide is to Install Stock Firmware on Vizio XR6M10 Smartcast
- This will work Vizio XR6M10 Smartcast
- Download the QPST
- Install the Latest Vizio USB Drivers.
- Charge your phone to at least 70%
- Back up your device just in case if you need it later
- You need either Laptop or PC
How to Update or Downgrade the the STOCK ROM on Vizio XR6M10 Smartcast:
- First of all, do all the PREREQUISITE STEPS and Now Open the Extracted QPST Folder
- You will find two files with the name : Qualcomm_USB_Drivers_For_Windows.rar and QPST.WIN.2.7 Installer-00429.zip

- Open the QPST Win folder and Install the QPST.exe file on your PC/Laptop

- After Installation, Go to the Installed Location in the C Drive
- Open the QPST Configuration

- Now in the QPST Configuration, Click on Add new port -> Select the com port of your device -> and close it

- Now Open the EMMC Software Downloader in the same folder located all the QPST Files

- In EMMC Software Downloader, Check program boot loaders -> Browse for the device com port

- Now Click Load XML Def and browse for rawprogram0.xml in folder ROM in EMMC Software Downloader (If you didn’t extract please extract the ROM and then browse the file rawprogram0.xml)

- Now tap on Load Patch def and browse for patch0.xml in folder ROM

- Check the search path 2 and browse for the folder ROM

- Now click download, wait for the download to finish (it never finish but it also detects for a new driver, and that’s important) and it will search for the new hardware found, install the driver
- That’s it ! Once your installation is done ! Reboot the phone ! Congrats, you successfully installed Stock ROM on Vizio XR6M10 Smartcast
I hope you installed the Stock Firmware on Vizio XR6M10 Smartcast successfully, Now please rate this website with your comment. We always welcome feedbacks and improvements.