On this page, we will guide you on how to install the official stock ROM flash file on your Tecno Pop 4 Pro BC3. Well, Tecno Pop 4 Pro is based on Android 10.0 which is powered by the Mediatek MT6739 processor. This guide will be helpful to unbrick or fix any software issues on your device.
To install the firmware flash file on Tecno Pop 4 Pro BC3, you need to download the software called SP Flash tool (also known as Smartphone flash tool). This method simple and easy. We have also added video and step by step tutorial to make things easier to flash the firmware file.
Advantages of Stock ROM:
Here are the answers to why you need to download and save the Tecno Pop 4 Pro Stock ROM flash file on your computer.
- If your device is dead, you can unbrick using the Stock ROM file
- You can fix or repair the IMEI on your device using DB files from Stock ROM
- Remove any malware or Adwares from Tecno Pop 4 Pro
- You can fix the boot loop issue on Tecno Pop 4 Pro
- Fix Unfortunately, the app has stopped error on Tecno Pop 4 Pro
- Fix Network related issue
- Patch Boot image to Root using Magisk: Mediatek Guide or Spreadtrum Guide
- You can unroot Tecno Pop 4 Pro
- To Reset or Remove FRP on your device: Mediatek FRP Guide or Spreadtrum FRP Guide
- Restore Tecno Pop 4 Pro back to Factory State
How to Flash Tecno Pop 4 Pro BC3 Firmware File
Before installing the Stock ROM on your Tecno Pop 4 Pro, you should download the firmware flash file. Then download and install the USB Drivers and flash tool on the PC as well. Once you’re done with these, you can proceed to the steps below. But let’s take a quick look at the Stock Firmware importance and firmware details below.
Pre-Requirements:
Download Flash Files
| Software Details |
Download Link |
Flash File Name: BC3-BC3ABC-QGo-OP-200806V013
File Size: 1.9 GB
Android Version: 10.0 |
Download Link |
Flash File Name: BC3-BC3ABC-QGo-OP-200825V016
File Size: 1.9 GB
Android Version: 10.0 |
Download Link |
Now, without wasting any more time, let’s jump into the firmware installation steps below:
- Make sure you follow and download all the required files and flash tool on your PC.
- Open the flash tool exe file to open the SP Flash Tool User Interface
- Once your load the SP Flash tool UI, Tap on Download option
- In the download tab, you have to load both the download agent and the sMeizuter text file in the sMeizuter-loading section.
- You will find the sMeizuter text file inside the ROM package for most cases, if not, you can create a sMeizuter text file on your own.
- Once you load the file, click the Download button
- To start the upgrade process of stock ROM on your Tecno Pop 4 Pro, you need to turn off your device and hold the Volume Down and Volume Up key together and Connect your Phone to PC/Laptop using USB Cable (Keep the Volume Down and Volume Up button until your computer detects the phone.)
- When the phone connects, your device will start upgrading the stock firmware
- You need to wait for a few minutes to complete the upgrade process.
- Once the flashing process completes, you will find a green button which means a successful upgrade.
- That’s it! You can reboot your Tecno Pop 4 Pro
Follow our full-depth video guide below:
