Tecno Camon iClick IN6 Firmware Flash File (Stock ROM | 8.1 Oreo)

Are you looking to install the firmware file on Tecno Camon iClick IN6? Then you are just in the right place. In this post, we have brought you the latest stock firmware for the Tecno Camon iClick.

These days installing custom ROMs, and rooting the device is a common scenario among smartphone enthusiasts. However, not every day is a sunny day. Usually, while customizing your device, you may have performed some wrong steps and ended up with a bricked device or a phone stuck in the endless boot loop. Sometimes the new custom OS you install brings a lot of unforeseen bugs. So, the only solution is to return the device to its previous state. This technically means flashing the stock firmware on the smartphone.

Talking of the Tecno Camon iClick, we have put up the latest stock firmware of the phone, the flash tool, and a complete tutorial to help you install the stock ROM correctly on the device. We have laid out all the instructions in a simple and detailed manner. So, it should be a cakewalk for you to install stock ROM on Tecno Camon iClick.

Tecno Camon iClick Firmware Flashing Guide

Installing a stock ROM is pretty easy. All you have to do is download the stock ROM for the corresponding device. Then grab the USB drivers, an exclusive flash tool that we will use for performing the installation. Talking of the flash tool, we are using the SP Flash tool in this guide because the Tecno Camon iClick runs on the MediaTek chipset.

You will also require some other tools which we have listed out below. You have to download and install them as instructed. Before getting on towards the installation, let’s find out the importance of stock ROM.

Why Stock ROM is important.?

A stock ROM is an OS which the device runs when it’s unboxed. It’s the pre-built operating system. So, by flashing the stock ROM, you would literally take back the device to its original working state.