How to Install Stock ROM on Samsung SM-A507FN (Firmware Guide)

The Samsung Galaxy A50s is a mid-range smartphone that comes under the 20K price segment. It was launched in September 2019 that offers good specifications including a nice-looking display. To be very specific, it has a Super AMOLED display with more than 85% screen-to-body ratio along with a 19.5:9 aspect ratio and a waterdrop notch as well.

In this tutorial, we will guide you on how to install the Samsung SM-A507FN (Galaxy A50S) flash file using the Samsung flash tool (also known as the ODIN flash tool). On this page, you will find the official stock firmware file for the Samsung Galaxy A50S SM-A507FN, drivers, and flash tool.

By flashing the Stock ROM file, you can always fix the device software issue such as boot loop, lag, soft brick or hard brick, remove pattern lock, FRP lock, and many more.

Samsung Galaxy A50s Device Overview

It has a 6.4-inches Super AMOLED display with 1080×2340 pixels resolution that offers Corning Gorilla Glass 3 protection. It runs on Android 10 over One UI 2.0 and powered by Exynos 9611 SoC, coupled with Mali-G72 MP3 GPU. The handset packs 4GB/6GB of RAM, 64GB/128GB of internal storage option with a dedicated microSD card slot.

The device sports a triple rear camera setup of 48MP (wide, f/2.0) + an 8MP (ultrawide, f/2.2) + 5MP (depth, f/2.2) lens with PDAF, HDR, Panorama, an LED flash, etc. It has a 32MP (wide, f/2.0) selfie camera with HDR mode. The handset has a 3.5mm audio jack, dual-band Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 5.0, GPS, A-GPS, GLONASS, GALILEO, BDS, NFC, FM Radio, USB Type-C port, USB OTG.

Talking about the battery capacity, the device packs a 4,000mAh battery with 15W fast charging support. It features an optical in-display fingerprint sensor, an ambient light sensor, an accelerometer, gyroscope, proximity, compass sensor.

Samsung Galaxy A50S SM-A507FN Firmware Flash Files:

Steps to Flash Stock ROM File on Galaxy A50S SM-A507FN

Before we get straight to the steps to Install Stock Firmware on your Samsung Galaxy A50S, let us take a look at the pre-requirements first.

Pre-Requirements: 

• This Guide is for Samsung Galaxy A50S SM-A507FN
• You need a Windows PC/Laptop and a USB cable to flash the firmware.
• Charge your device with a minimum of 50% battery backup.
• You have to download the latest Samsung USB Drivers and install them on your PC.
• Make sure that you have ODIN Software installed on your PC.
• Take a backup of your device (No Root) before doing anything.

Now, let’s take a look at Steps to flash Stock ROM on Samsung Galaxy A50S.

1. Download the Samsung SM-A507FN firmware flash file
2. Extract the contents of the firmware flash file zip.
3. Launch the ODIN application
4. Load the firmware files in their appropriate section
5. Once you have loaded, now connect your phone to the computer (make sure to boot your device into download mode)
6. Notice that the CO port will light up on Odin once you connect your phone.
7. Click the Start button to install the firmware on your Samsung device.
8. That’s it! You will see a PASS message once the installation is complete.

Follow Complete Guidelines

Check out our full-depth video guide as well.

Video Tutorial To Install Firmware

We hope that this guide will be helpful to you. If in case, you’re facing any issues, feel free to ask in the comments below.