Samsung SM-A022F Firmware Flash File (Stock ROM Guide)

In this tutorial, we will guide you on how to install the Samsung SM-A022F (Galaxy A02) flash file using the Samsung flash tool (also known as the ODIN flash tool). On this page, you will find the official stock firmware file for the Samsung Galaxy A02 SM-A022F, drivers, and flash tool.

By flashing the Stock ROM file, you can always fix the device software issue such as boot loop, lag, soft brick or hard brick, remove pattern lock, FRP lock, and many more.

Samsung Galaxy A02 SM-A022F Firmware Flash Files:

Steps to Flash Stock ROM File on Galaxy A02 SM-A022F

Before we get straight to the steps to Install Stock Firmware on your Samsung Galaxy A02, let us take a look at the pre-requirements first.

Pre-Requirements: 

• This Guide is for Samsung Galaxy A02 SM-A022F
• You need a Windows PC/Laptop and a USB cable to flash the firmware.
• Charge your device with a minimum of 50% battery backup.
• You have to download the latest Samsung USB Drivers and install them on your PC.
• Make sure that you have ODIN Software installed on your PC.
• Take a backup of your device (No Root) before doing anything.

Now, let’s take a look at Steps to flash Stock ROM on Samsung Galaxy A02.

1. Download the Samsung SM-A022F firmware flash file
2. Extract the contents of the firmware flash file zip.
3. Launch the ODIN application
4. Load the firmware files in their appropriate section
5. Once you have loaded, now connect your phone to the computer (make sure to boot your device into download mode)
6. Notice that the CO port will light up on Odin once you connect your phone.
7. Click the Start button to install the firmware on your Samsung device.
8. That’s it! You will see a PASS message once the installation is complete.

Follow Complete Guidelines

Check out our full depth video guide as well.

Video Tutorial To Install Firmware

We hope that this guide will be helpful to you. If in case, you’re facing any issues, feel free to ask in the comments below.