How to Install Stock ROM on T-Mobile REVVLRY Plus XT1965-T (Firmware Guide)

Step 1. Bootloader Mode

Enter bootloader mode on your phone. To boot first, turn your phone off. Once your device turned off completely, press and hold volume down, and turn it on. You should see the bootloader screen.

Step 2. Connect Your Device to PC:

After booting your REVVLRY Plus into bootloader mode, now connect it to the PC using the USB Cable.

Step 3. Download Stock ROM/Firmware:

To get the full ROM, you can use the LMSA or Rescue and Smart Assistant Tool. Download the zip file and copy it to somewhere on your PC. LMSA tool will unzip the file and will remove the zip file you downloaded.

You can also download the full stock ROM from the above download flash file section on this guide.

Step 4. Flashing Guide:

1. 1. The next step is to open the command window and go to the adb folder
   2. Enter the following command to flash the firmware.

      fastboot oem fb_mode_set
      fastboot flash partition gpt.bin 
      fastboot flash logo logo.bin
      fastboot flash boot boot.img
      fastboot flash dtbo dtbo.img 
      fastboot flash dsp dspso.bin 
      fastboot flash bootloader bootloader.img 
      fastboot flash system system.img_sparsechunk.0
      fastboot flash system system.img_sparsechunk.1
      fastboot flash system system.img_sparsechunk.2
      fastboot flash system system.img_sparsechunk.3
      fastboot flash system system.img_sparsechunk.4
      fastboot flash system system.img_sparsechunk.5
      fastboot flash system_b system_other.img
      fastboot flash oem oem.img
      fastboot flash modem NON-HLOS.bin
      fastboot flash fsg fsg.mbn
      fastboot flash bluetooth BTFM.bin
      fastboot oem fb_mode_clear
      fastboot erase userdata
      fastboot erase ddr

   3. Now your device will reboot into bootloader with the firmware you installed.

That’s it, guys. We hope this guide was helpful to you. Feel free to ask in the comment below for additional queries.