In this guide, we’ll be sharing the easy steps to install the Motorola XT2093-4 (Moto G Play 2021) firmware flash file (codenamed guamna). As an open-source platform, Android devices do come with plenty of customization options which can also lead to bricking or stuck in the boot loop issue due to unsupported file flashing or even improper flashing steps. Needless to say that most Android users want to heavily customize their devices via flashing third-party firmware files or rooting.
In some cases, the device performance may become slow, starts lagging, networking issues, etc. So, installing the stock firmware on your Moto G Play 2021 device will bring back a stable life like before.
Steps to Install Motorola XT2093-4 Firmware Flash File
Now, if you’re ready to flash the stock firmware manually on your Moto G Play 2021 XT2093-4 device then you need to download the flash tool, firmware file, and necessary drivers. So, without wasting any more time, let’s get into it.
Pre-Requirements:
- This ROM is supported for the Moto G Play 2021 XT2093-4 (guamna) variant only.
- Make sure that your device should be charged at least 50% or higher.
- You will require a PC or Laptop with a USB Data Cable.
- We always recommend our readers take a full data backup of the device for safety purposes.
- Install Motorola USB Drivers and Rescue and Smart Assistant Tool on your PC
- To flash, you must download the ADB and Fastboot tool
Disclaimer:
Everything worked ok but carrier lock is still active :( cricket