How to Install Stock ROM on Moto G Fast XT2045-2 (Firmware Guide)

On this page, we have shared the download link and guide to install the Motorola XT2045-2 (Motorola Moto G Fast) firmware flash file using the fastboot method. Here you will find all stock firmware zip files for all the supported regions with Motorola Moto G Fast XT2045-2.

If you are someone who wants to restore the device back to factory firmware, then this guide is for you. By using this guide, you can fix certain software-related issues such as hard brick, soft brick, WiFi, or Bluetooth issue, fix lag or stutter or even you can downgrade the device anytime.

Steps to Install Motorola XT2045-2 Stock Firmware

Now, if you’re ready to flash the stock firmware manually on your Motorola Moto G Fast XT2045-2 device then you need to download the flash tool, firmware file, and necessary drivers. So, without wasting any more time, let’s get into it.

Pre-Requirements:

• This ROM is supported for the Motorola Moto G Fast XT2045-2 (rav) variant only.
• Make sure that your device should be charged at least 50% or higher.
• You will require a PC or Laptop with a USB Data Cable.
• We always recommend our readers take a full data backup of the device for safety purposes.
• Install Motorola USB Drivers and Rescue and Smart Assistant Tool on your PC
• To flash, you must download the ADB and Fastboot tool

Motorola Moto G Fast XT2045-2 Firmware Flash Files:

Firmware Installation Guide:

Check out the firmware flashing guide below for the Motorola Moto G Fast XT2045-2. First, make sure to install or extract the adb and fastboot tool on your PC. Now enter the bootloader on your device.