Fix Samsung S24, S24 Plus, or S24 Ultra WiFi Not Working or Not Showing Up
Fortunately, here we’ve shared with you some potential workarounds that should come in handy. Make sure to follow all troubleshooting methods until the problem has been fixed. So, without wasting any more time, let’s get into it.
1. Force Restart Your Phone
Before performing any other workarounds, you’ll have to force restart your Samsung Galaxy S24 series device to easily refresh any kind of temporary system glitches or cache data issues. The chances are high that somehow your device is conflicting to connect to the Wi-Fi network unexpectedly.
- Press & hold the Power+Volume Down buttons simultaneously for a few seconds until the device is turned off.
- Now, release the buttons and wait for a while.
- Then press & hold the Power button for a few seconds.
- Release the button when the boot logo appears.
- Your device will automatically boot into the system.
- Finally, check for the Wi-Fi networking issues.
2. Power Cycle the Wi-Fi Router
The second thing you’ll need is to power cycle the Wi-Fi router manually at your end to refresh networking glitches in most cases. As several users have already tried this method and found it useful, you should also check for the same.
- Turn Off the Wi-Fi Router > Unplug the power adapter from the source.
- Wait for around a minute or so.
- Next, connect the power adapter again.
- Then power on the router and wait for LED indicators to become active.
- Finally, connect to the Wi-Fi network again & check for the issue.
In case, you’re still facing the same issue then head over to the next workaround.
3. Check for the Correct Wi-Fi Network
Another thing you can do is cross-check if you’re using the correct Wi-Fi network or not. Sometimes an incorrect Wi-Fi network or incorrect Wi-Fi password might trouble you with Wi-Fi disconnection and not working problems.
4. Turn Off and On Wi-Fi
Ensure to manually turn off the Wi-Fi network and then turn it on to refresh the potential networking conflicts at your end.
- Open the Settings menu.
- Tap on Connections > Tap on Wi-Fi.
- Tap on the Wi-Fi toggle to turn it Off.
- Wait for a couple of seconds and then turn it On again.
5. Enable Airplane Mode and Disable It
It’s also worth mentioning to turn on the Airplane Mode on your Samsung Galaxy S24 series device for a while and then turn it off to ensure no temporary networking glitches are troubling at your end. The Airplane Mode can easily turn off Wi-Fi networks, mobile data, locations, carrier signals, etc.
- Open Settings > Tap on Connections.
- Tap on Airplane Mode > Enable the Airplane Mode toggle.
- Now, wait for a few seconds.
- Turn Off the Airplane Mode again.
- Next, restart the handset and check for the issue further.
6. Forget the Wi-Fi Network and Add It Again
You might also need to forget the Wi-Fi network on your Galaxy S24 lineup handset and then re-add it by following the steps below. This specific method will help the users to easily refresh any kind of Wi-Fi networking glitches in most scenarios.
- Open the Settings menu.
- Tap on Connections > Tap on Wi-Fi.
- Make sure to Enable the Wi-Fi toggle.
- Tap on the Menu icon in the upper-right corner.
- Next, tap on Manage Networks.
- Then tap on the Wi-Fi Network that you want to remove.
- Now, tap on Forget at the bottom.
- Tap on the specific Wi-Fi network that you want to add.
- Enter the Wi-Fi password that has been set in the router’s admin panel.
- Once the password is entered, tap on Save.
7. Check for Wi-Fi Network Interferences
Well, it might also be possible that somehow any objects or magnetic fields around your Wi-Fi router then you will encounter slow Wi-Fi speed or unstable signal. To do so, check the steps below:
- Ensure to move your device closer enough to your Wi-Fi router.
- Maintain some distance between the router and walls or other electronic items.
8. Check for Software Updates
You should also check for software updates on your Samsung Galaxy S24 series device because there might be an outdated system software version which can cause several issues with the Wi-Fi network. Updating the latest software version will help in installing new features and additions to avoid bugs or issues.
- Open Settings > Tap on System Updates.
- Tap on Check for System Updates.
- If a new software update is available, tap on Download Now.
- Now, tap on Install Update.
- It’ll automatically reboot the device to the system.
- Once the update is installed, tap on OK.
- After successfully updating your software, check for the issue.
9. Keep Wi-Fi On During Sleep
Though the Wi-Fi Power Saving Mode on mobile devices can be a useful feature to improve the battery percentage, sometimes Wi-Fi conflicts can also appear whenever your phone goes into sleep mode.
- Go to the Settings menu > Go to Connections.
- Tap on Wi-Fi > Go to the Advanced Wi-Fi Settings menu.
- Now, Turn On the Keep Wi-Fi active during sleep option.
- Then select Always.
10. Try Switching to Another Wi-Fi Band
Modern-day Wi-Fi Routers can often go with both the dual-band 2.4GHz and 5GHz Wi-Fi bands so that devices can connect to the respective network bands. However, the base 2.4GHz Wi-Fi band has a better signal range and stability with a slightly slower speed. Whereas the 5GHz Wi-Fi band offers faster data speed with a shorter signal range. So, switching between the Wi-Fi bands depending on your preference can help a lot.
- Check your Router’s user manual for the login credentials and admin URL.
- Now, visit the web browser > Log into the admin panel.
- Head over to the Wireless Settings > Switch the band. (Set it to Auto)
- Save the changes and then try connecting your handset to the switched band.
11. Disable Smart Network Switch
Several Samsung Galaxy S24 series users have reported that disabling the smart network switch feature manually did come in handy. You should also try turning it off by following the steps below to check whether the auto switch to mobile data feature is somehow conflicting or not.
- Go to Settings > Tap on Connections.
- Tap on Wi-Fi > Tap on the Menu icon on the upper-right side.
- Now, Tap on Intelligent Wi-Fi.
- Tap on the Mobile Data Switch > Turn it Off.
12. Connect to a Different Wi-Fi Network
You’ll also need to manually connect to a different Wi-Fi network at your end because sometimes conflicts with the existing network can trigger multiple issues. Try using another network to check for connectivity problems.
- Head over to the Settings menu.
- Tap on Connections.
- Select Wi-Fi > Turn On the Wi-Fi toggle.
- Under the ‘Available Networks’ section, tap on the preferred Wi-Fi network.
- If the preferred network isn’t listed, you can add it manually.
- Now, enter the Wi-Fi Password > Connect to it.
13. Boot Your Phone in Safe Mode
Safe Mode is a diagnostic tool that comes by default on mobile devices so that users can run into it and identify potential issues. It’ll help in detecting problems like third-party installed applications, malware, viruses, etc. After detecting the issue, you can boot into the system again normally.
- Press and hold the Power button for a few seconds.
- This will bring the Power menu to the screen.
- Tap and hold the Power Off option to bring the Safe Mode option.
- Now, tap on Safe Mode.
- Your Galaxy S24 series handset will boot into safe mode.
- Then check for the networking issues at your end.
- Once the reason is recognized, restart your device normally.
14. Reset the Network Settings
It’s suggested to manually reset the network settings on your handset to fix any kind of potential Wi-Fi networking glitches. This method will delete the saved Wi-Fi networks so do remember the specific Wi-Fi password to join later.
- Open the Settings menu.
- Tap on General Management.
- Now, tap on the Reset menu.
- Tap on Reset Wi-Fi and Bluetooth Settings.
- Then tap on Reset Settings.
- Once done, reboot the device.
- Finally, join the Wi-Fi network again.
15. Factory Reset Your Handset
If the above methods didn’t work for you then perform a factory data reset method on your Samsung Galaxy S24 series handset. You should follow the steps below to refresh corrupted system data or networking configurations.
Please Note: Ensure to take a data backup of your handset before resetting because it’ll wipe out all data, contacts, messages, documents, media files, etc which are stored on the internal storage.
- Go to the Settings menu > Tap on General Management.
- Tap on Reset > Hit Factory Data Reset.
- Now, tap on Reset again.
- If prompted, enter the device PIN, password or pattern.
- Tap on Delete All.
- Wait for the factory data reset to complete.
- Once done, your device will reboot to the system automatically.
- Then go through the initial setup process.
As a final resort, you’ll need to contact Samsung support via call or directly visit the nearest service centre to get your phone checked by the expert. In case, your handset is under the manufacturer’s warranty, you can ask for the device replacement for any kind of hardware issues.
That’s it, guys. We assume this guide was helpful to you. For additional queries, you can comment below.
