Before doing the methods, I just want to warn you that, By doing this you will loose the warranty and sometime if you don’t read the steps and do something wrong can brick your device. That won’t happen though you follow our step by step guide carefully.
To install TWRP Recovery or any Custom Recovery on ZTE Axon 7 Mini, you must have an Unlocked Bootloader. If your phone doesn’t have an Unlocked Bootloader, first of all, you should go and unlock the bootloader of your phone. Only after doing so you can safely apply everything that’s detailed in this tutorial.
Advantage of TWRP Recovery
- You can flash Custom ROM with TWRP Recovery
- You can flash modding zip files to customize your phone
- Easy to use Xposed Modules’
- Easy to Root and Unroot using TWRP Recovery flashable zip SuperSU
- You can always take FULL NANDROID Backup in case of any modding or flashing.
- Easy access to restore the Nandroid Backup.
- You can flash the image file using TWRP Recovery.
- Can remove all bloatware using TWRP Recovery.
- To underclock and overclock.
- You can clean Wipe, Cache, and Data.
RELATED POST
CHECK POPULAR POST
PRE-REQUISITE
GetDroidTips.com is not responsible for any damage to your phone while installing this Update.
- This Guide is for How to Root and Install TWRP Recovery For ZTE Axon 7 Mini.
- You need to unlock Bootloader on ZTE Axon 7 Mini.
- Download Tuliptool
- You need either Laptop or PC.
- Download Chainfire Super SU.zip
- Charge your phone to at least 70%
- Back up your device just in case if you need it later
- Download Minimal ADB Tool – CLICK HERE or Download the Full ADB setup for Windows / Mac here and Extract it.
- Make sure you have followed the steps properly. Don’t Skip and Read! – We are not responsible for any damage that you make to your phone.
Also Read: TeamWin rolled new updated TWRP v3.1.0 with ADB Backup Support
Download Files
TWRP Recovery
Installation Guide:
This tool allows you to:
- You can check the status of your bootloader
- Allows you to easily Unlock the bootloader
- You can even relock your bootloader
- Easy to Install a custom recovery
- Install a custom boot image
- Download and Extract the Downloaded Tuliptool on your PC or Linux by downloading the Linux binary (tuliptool-Linux) and a Win64 binary (tuliptool-win64.exe)
- For Linux Computer: Create a file named /etc/udev/rules.d/99-qcom.rules with this content exactly as shown:
SUBSYSTEM==”usb”, ATTRS{idVendor}==”05c6″, GROUP=”plugdev”
Ensure your login user is in the plugdev group.
For Windows PC Computer:
– Download zadig
– Connect your phone and Put in EDL Mode (Power off and connect your device while pressing both volume button, this will put your phone in EDL Mode)
– Now, wait until the Windows will install the Qualcomm USB Drivers. (We won’t be using it so you can cancel if you wish, but it won’t hurt anything.)
– Run Zadig and Find your device number 05c6:9008 and install the WinUSB driver for it.
– Once it is done! You can disconnect the device.
- Check the below USAGE line.
Usage: (un)locking
tuliptool lock status
tuliptool lock unlock
tuliptool lock lock
Usage: reading boot/recovery
This will read the selected partition to name-backup.bin
tuliptool read boot
tuliptool read recovery
Usage: writing boot/recovery
This will write name.bin to the selected partition
tuliptool write boot
tuliptool write recovery
So, for example, to write the included TWRP image, first copy tulip-twrp-7.1.1.img to recovery.bin and then run tuliptool write recovery.
Full Guide to install Root on your phone
Full Guide to Magisk on your phone
So i hope you have understood on How to Root and Install TWRP Recovery For ZTE Axon 7 Mini, If yes then please give the star rating. If not leave a message, We will help you.
Source
Please help me to root ZTE Axon 7 mini -B2017G. I wants root. This not help for me.