It is important not to put too much moisture in your cleaning cloth, as this can irreparably damage your earbuds. Ensure that the charging contact and outer body of the charging case are dry before you return them to the charging case. If there is some minute debris you cannot remove, use an adhesive putty and a lint-free cloth to clean the Buds from the A-Series.
Fix 3: Clean the Charging Case
You can clean the Pixel Bud charging case inside with a lint-free cloth by opening the lid and wiping the inside thoroughly. It can also be done with a cotton swab. If you want to clean the exterior with a damp cloth, be careful not to get the USB-C port wet.
Whenever you clean your charging case, pay special attention to the magnetized pods and the contacts for charging. It is not advisable to use liquid or water on the inside. If you intend to use the USB-C cable or charge your Pixel Buds A, make sure you allow the case to dry properly before doing so.
Fix 4: Reset the Charging Case
It is located at the bottom of your Pixel Buds A charging case, at the back, and it is oval-shaped. When the status light of the earbuds starts blinking white and orange, hold the case without closing the lid. When it goes back to pulsing white, continue pressing the button. After the Pixel Buds have been inserted inside the case, a charging status should appear on the device. It can be paired with your device and used normally.
Fix 5: Updating the Software of Your Pixel Buds
To ensure that your Pixel Buds provide seamless audio, you should keep their software updated. Your phone should be connected to your earbuds. Next, you’ll need to update the firmware for your Pixel earbuds A using your phone’s device settings.
If you have been using Bluetooth earbuds during the update, switch them off for around 30 seconds after completing the update. When you restart it after 30 seconds, both of your earbuds will be able to pair and play your streaming audio.
Fix 6: Charge your Pixel Buds
Using the included USB-A to USB-C cable, plug your Pixel Buds A charging case into a power source while your earbuds are inside. Make sure your Pixel Buds are fully charged before trying to pair them. In order to do so:
- Ensure Bluetooth has been turned on and your Pixel Buds are within range of a strong connection.
- In addition, go to the device’s Settings menu and turn Bluetooth on/off.
- You will be automatically reconnected once the Pixel Buds A have reconnected with your previous device. Please allow a few seconds for the process to complete. From the Bluetooth menu on your device, select ‘Pixel Buds’ if you need to change the device you’re connected to.
Does Google Offer A Warranty For The Pixel Buds?
Google says the Pixel Buds are covered for one year for brand-new devices and for 90 days for refurbished ones, depending on the documentation that came with your Pixel Buds. You are entitled to either a repair, a replacement, or a refund, depending on the specifics of your case, if your Pixel Buds stop working while they are still under warranty.
If your Pixel Buds stop working and you cannot fix them yourself, and the Pixel Buds are still within their warranty term, what should you do? In that case, you can contact Google customer service for more information.
So, that’s all we have for you on how to fix the Pixel Buds A Series Case not charging, right or left ear not charging issue. It’s our hope that this guide has helped you. For more details regarding this topic, comment below and let us know.