Fix Pixel 6 and 6 Pro Error: Your device is corrupt It can’t be trusted
You’ll have to properly flash the stock firmware on your Pixel 6 Pro device to easily get out of this error. Either you can follow the fastboot image file flashing method or the full stock firmware flashing method or the adb sideload method according to your preference. Here we’ve shared all three methods via the links given below that you can check out. If your device bootloader is locked then you should use the ADB Sideload method.
Otherwise, if your device bootloader is unlocked then you can follow the Fastboot flashing method to do the job easily. Well, we should mention that the ADB Sideload method won’t gonna wipe your data. On the other side, the Fastboot method will allow you the option to format the device or flash it without wiping. Now, without wasting any more time, let’s jump into it.
Method 1: Use ADB Commands
You can try using ADB Fastboot commands on your Google Pixel 6 or Pixel 6 Pro to easily remove the DM-Verity message or warning error by following the steps below.
- First, you’ll have to download the Android SDK Platform Tools on your computer.
- Once downloaded, make sure to extract it to a convenient location on your PC.
- Now, enable Developer Options on your Google Pixel 6 series. Head over to the Settings menu > About Phone > Tap on Build Number 7 times to turn it on.
- Then go back to the main Settings menu > System > Advanced > Developer Options > Enable USB Debugging.
- Next, make sure to connect your device to the PC via a USB cable > Open File Explorer.
- Head over to the extracted platform-tools folder on the PC > Type CMD in the address bar and hit Enter to open Command Prompt.
- Copy-paste the following command line inside the command prompt window and hit Enter to remove the DM-Verity warning message completely:
adb reboot "dm-verity enforcing"
- Once done, disconnect your device from the PC, and reboot the handset to apply the changes immediately.
Method 2: Flash Stock Firmware via ADB Sideload or Fastboot Commands
You should flash the stock firmware file on your Pixel 6 series model by using the adb sideload or fastboot method. If your device bootloader is locked then you’ll have to use the ADB Sideload method. Otherwise, if your device bootloader is unlocked then you can try using the Fastboot method. We’ve mentioned both the methods below for your ease.
Note: ADB Sideload method will not wipe your device data. While the Fastboot method allows you the option to format the device data or flash without wiping whatever you prefer. However, it’s recommended to wipe out all the device data completely for better performance.
- Flash Stock Firmware on Pixel 6 and 6 Pro via Fastboot Commands (Unbrick)
- Flash Fastboot Images on Pixel 6 and 6 Pro
- Use ADB Sideload Method to Install OTA or Sideload ROMs on Android
This is how you can easily install the stock firmware on your Google Pixel 6 or Pixel 6 Pro device without any second thought if you’re facing the device corrupt or stuck in the bootloop issue.
That’s it, guys. We assume this guide was helpful to you. For further queries, you can comment below.
