OPPO Reno 7 Pro 5G CPH2293 Firmware Flash File (Stock ROM)

Oppo Reno7 Pro 5G was launched in India that runs on Android 11 with ColorOS 12 on top and features a 6.5-inch full-HD+ AMOLED display with a 90Hz refresh rate. The device is powered by a MediaTek Dimensity 1200-Max SoC along with 12GB of RAM. The device sports a triple rear camera setup that includes a 50 MP primary sensor, 8 MP ultra-wide sensor, and a 2 MP macro lens sensor.

On this page, we will guide you on how to install the official stock ROM flash file on your OPPO Reno 7 Pro 5G CPH2293. Well, the device runs out of the box with Android 11.0 which is powered by the MediaTek Dimensity 1200-Max processor. This guide will be helpful to unbrick or fix any software issues on your device.

To install the firmware flash file on OPPO Reno 7 Pro 5G CPH2293, you need to download the software called SP Flash tool (also known as Smartphone flash tool). This method is simple and easy. We have also added video and step-by-step tutorials to make things easier to flash the firmware file.

Advantages of Stock ROM:

Here are the answers to why you need to download and save the OPPO Reno 7 Pro 5G Stock ROM flash file on your computer.

• If your device is dead, you can unbrick using the Stock ROM file
• You can fix or repair the IMEI on your device using DB files from Stock ROM
• Remove any malware or Adwares from OPPO Reno 7 Pro 5G
• You can fix the boot loop issue on OPPO Reno 7 Pro 5G
• Fix Unfortunately, the app has stopped errors on OPPO Reno 7 Pro 5G
• Fix Network related issue
• Patch Boot image to Root using Magisk: Mediatek Guide or Spreadtrum Guide
• You can unroot OPPO Reno 7 Pro 5G
• To Reset or Remove FRP on your device: Mediatek FRP Guide or Spreadtrum FRP Guide
• Restore OPPO Reno 7 Pro 5G back to Factory State

How to Flash OPPO Reno 7 Pro 5G CPH2293 Firmware File

Before installing the Stock ROM on your OPPO Reno 7 Pro 5G, you should download the firmware flash file. Then download and install the USB Drivers and flash tool on the PC as well. Once you’re done with these, you can proceed to the steps below. But let’s take a quick look at the Stock Firmware importance and firmware details below.

Pre-Requirements:

• Supported device: OPPO Reno 7 Pro 5G CPH2293
• Make sure to charge your device more than 50%
• You need a PC or Laptop with a USB cable.
• Take a complete backup of your android phone
• Download Drivers and Tools: VCOM drivers, SP Flash Tool, and Oppo USB Drivers

Download Flash Files

Instructions to install:

Here is a detailed guide mentioned below which you can follow completely.