Fix: Naraka Bladepoint Can’t Connect to Server on PC, PS4, PS5, Xbox Consoles

Whereas poor or unstable internet connection, issues with the game files, outdated game version, temporary system glitch, game cache data issues, outdated system software, etc can be other possible reasons behind it. Maybe you’re also facing the automatically getting kicked out of the server without any error or something like ‘Connection Error: Your connection has timed out’, ‘Please check your network’, ‘Can’t connect to the network’, etc error.

If so, there is nothing to worry about it. Here we’ve shared a couple of possible workarounds for you that should gonna come in handy. Now, without wasting any more time, let’s jump into it.

1. Check the Server Status

It’s highly suggested to ensure whether there is an issue with the game server or not. Sometimes server outages or maintenance issues can bring the game launching or multiplayer mode connectivity issues whatsoever. You should check for the same on the official @NARAKATHEGAME Twitter handle. If in case, there is a server outage or overload of the active number of players during the peak timing then make sure to wait for a couple of hours and try again.

If there is no major outage with the Naraka Bladepoint game server then you can skip to the next workarounds until the problem gets fixed completely.

2. Check your Internet Connection

First of all, you should try checking out the internet connection at your end no matter whether you’re using Wi-Fi or wired (ethernet). If in case, you’re having a poor internet connection or an unstable one, make sure to contact your service provider to increase the data speed or change the IP address to fix the networking connectivity issue. You should try switching to the wired (ethernet) connection from wireless (Wi-Fi) or vice versa to cross-check it.

3. Update Naraka Bladepoint

You should update the game to check whether the problem is appearing due to the outdated or corrupted game version or not. It’s needless to say that the latest game update can bring bug fixes or stability improvements. To do so:

For PC: (Steam)

Open the Steam client > Go to Library.
Right-click on Naraka Bladepoint from the list > Click on Manage.
Select Properties > Click on the Updates tab > Click on Automatic Updates.
If it’s enabled, whenever there is a new update available, the Steam client will do the job for you.

For PC: (Epic Games Launcher)

Open the Epic Games Launcher > Click on Settings.
Scroll down to the Manage Games section and make sure there is a checkmark next to Allow Auto-Updates.
Now, expand the menu for each game that you want to enable automatic updates on.
Ensure that the games have the Auto-update box checked.
Exit the launcher and open it again to refresh the system.
Finally, you should be able to update the Naraka Bladepoint game on the PC.

For Xbox Consoles:

Head over to the My Games and Apps section > Go to Manage.
Select Updates and install the latest version of the game.

For PlayStation Consoles:

From the home menu, open the game Library > Choose the Naraka Bladepoint game.
Press the Options button > Select Check for Update.
If there is an update available, make sure to install the update.

4. Update All Device Drivers (PC Only)

Another thing you can do is simply try updating the device drivers on the PC to fix multiple issues with the system performance that can happen for any program. Corrupted or missing device drivers can eventually trouble you a lot. To do so:

Right-click on the Start Menu to open up the Quick Access Menu.
Click on Device Manager from the list.
Now, double-click on the respective device driver category to expand the list. [Such as Display adapters, network drivers, etc]
Then right-click on the device > Select Update driver.
Choose Search automatically for drivers.
If there is an update available, it’ll automatically download and install the latest version.
Once done, make sure to reboot your computer to change the effects.

5. Update System Software

Sometimes issues with the outdated system software can also cause conflicts with system performances, especially in multiplayer games or any resource-heavy programs. You should always update the system software on your device to maintain the performance stable enough. To do that:

For PC:

Press Windows + I keys to open up the Windows Settings menu.
Next, click on Update & Security > Select Check for updates under the Windows Update section.
If there is a feature update available, select Download and install.
It may take a while to complete the update.
Once done, restart your computer to install the update.

For PlayStation Consoles:

Go to the Settings menu on the PlayStation console.
Select System Software Update > Make sure to check for available updates and follow the on-screen instructions to complete the update process.
Once done, reboot the system to apply changes.

For Xbox Consoles:

Press the Home button on the Xbox console to open the Dashboard menu.
Now, select Settings from the bottom of the menu > Select All Settings.
Choose to System > Select Updates.
Select Update Console (if available) > Follow the on-screen prompts to complete the update process.
Once done, make sure to restart the console to apply changes.

6. Repair Game Files (PC Only)

Another thing you can do is simply verify and repair the game files on your PC via the Steam client to ensure there are no corrupted or missing game files present on your computer. To do that:

For Steam:

Launch Steam > Click on Library.
Right-click on Naraka Bladepoint from the list of installed games.
Now, click on Properties > Go to Local Files.
Click on Verify Integrity of Game Files.
You’ll have to wait for the process until it gets completed.
Once done, just restart your computer.

For Epic Games Launcher:

Open the Epic Games Launcher > Click on Library.
Click on the three-dots icon of Naraka Bladepoint.
Click on Verify and it’ll start verifying the game files.
Wait for the process to complete and restart the launcher.

7. Power Cycle your PC or Console

Sometimes issues with the temporary glitch on the PC or console device can eventually trigger multiple conflicts with the game launching and multiplayer connectivity. It’s better to perform a simple power cycle method on your gaming device to ensure if the problem has been fixed or not. To do that:

Just power off the PC or console completely > Unplug the power cable from the power source and from the device itself.
Wait for around a couple of minutes then plug back the power cable in.
Finally, power on the PC or console, and launch the game again to check for the issue.

8. Power Cycle Wi-Fi Router

It’s also recommended to try performing a power cycle method on your Wi-Fi router because temporary glitches can also cause issues with the network connectivity whatsoever. To do so, power off the router and unplug the power adapter from the power source > Wait for around 30 seconds then plug back the power cable in > Turn on the Wi-Fi router to check for the issue.

9. Clear Naraka Bladepoint Game Data

It seems that deleting the installed game saved data on the PC or console can also fix several issues with the game launching or gameplay. You should try performing this method to check for the issue.

For PC:

Press the Windows+I keys to open the Windows Settings app.
Go to System > Click on Apps & Features.
Locate the Naraka Bladepoint game that you want to reset from the list of installed programs.
Now, click on it > Click on Advanced Options next to it.
Select the Reset button to reset the app data.
If prompted, you’ll have to click on Reset once again to confirm.
Wait for the process to be completed > Once done, reboot the PC to apply changes.

For Xbox Consoles:

First, quit the Naraka Bladepoint game > Select My games & apps.
Select See all > Make sure to highlight the Naraka Bladepoint game.
Select Manage game and add-ons > Go down to Saved data.
Choose the Delete all button > Wait for it to complete.
Finally, relaunch the game to check for the issue.

For PlayStation Consoles:

Go to Settings > Select Application Saved Data Management.
Choose either System Storage or Online Storage or USB Storage > Select Delete.
Select the Naraka Bladepoint game > Checkmark the files that you want to delete or just Select All.
Finally, select Delete > Select OK to confirm the task.
Once done, reboot your console to check for the issue again.

10. Rebuild Database (PS4/PS5)

Rebuilding the database on your PlayStation console can quickly resolve the potential issues or errors. To do so:

Switch off your console completely. Unplug the power cable from the console and wait for around 2-3 minutes.
Now, plug in the power cable, and turn it on to clear the Cached Data automatically from the system.

Check whether this issue has been fixed with the game or not. If not, follow the next steps below.

Now, press and hold the Power button on the PlayStation console until you hear 2 beeps. [The second beep will sound after seven seconds]
The console will boot in the Safe Mode > Connect the controller to the USB with the console and press the PS Button on the controller.
Next, you’ll get an option called Rebuild Database.
Select Rebuild Database and confirm the task.
It may take some time depending on the hard drive data size. Have some patience.
Once done, just reboot the system normally.

11. Hard Reset your Console

In most cases, performing the hard reset of your console can fix system glitches or cache data issues from the game itself. To do so:

For Xbox Consoles:

Go to Guide by pressing the Xbox button on your controller.
Then go to Profile & System > Select Settings.
Choose System > Select Console Info.
Select Reset > If prompted, confirm the task to proceed.
Wait for the console to reset completely.
Once done, make sure to sign in to your Xbox account.
Finally, install the Naraka Bladepoint game properly, and then check for the crashing issue.

For PlayStation Consoles:

Switch off your PlayStation 4 or PlayStation 5 console first.
Once the console is turned off, press and hold the Power button on the console until you hear two beep sounds within a couple of seconds.
Here you’ll see two reset options to choose from.
Select the necessary option to reset your PlayStation console.
Wait for the process to complete and then make sure to sign in to the PlayStation account.
Finally, install the Naraka Bladepoint game, and try running it.

12. Don’t Put in Rest Mode (PS4/PS5)

Make sure not to keep your PlayStation console in the rest mode because it may cause some issues with the game crashing or not launching. To do so:

Go to the PS4/PS5 Settings menu > Open the Power Saving tab.
Select Set Time Until PS5 Enter Rest Mode.
Set to Don’t Put in Rest Mode > Restart the console to apply changes.

13. Contact Naraka Bladepoint Support

If none of the methods worked for you then make sure to contact Naraka Bladepoint Support for Naraka Bladepoint to get further assistance. You should create a support ticket for the same to get a quicker resolution. Developers will try to deeply investigate the issue and contact you about the fixes.

That’s it, guys. We assume this guide was helpful to you. For further queries, you can comment below.

Fix: Naraka Bladepoint Can’t Connect to Server on PC, PS4, PS5, Xbox Consoles