How to Install Stock ROM on Motorola XT2113-1 (Firmware Guide)

On this page, we have shared the download link and guide to install the Motorola XT2113-1 (Motorola One 5G UW Ace, codenamed kievv) firmware flash file using the fastboot method. Here you will find all stock firmware zip files for all the supported regions with Motorola One 5G UW Ace XT2113-1.

If you are someone who wants to restore the device back to factory firmware, then this guide is for you. By using this guide, you can fix certain software-related issues such as hard brick, soft brick, WiFi, or Bluetooth issue, fix lag or stutter or even you can downgrade the device anytime.

Steps to Install Motorola XT2113-1 Stock Firmware

Now, if you’re ready to flash the stock firmware manually on your Motorola One 5G UW Ace XT2113-1 (kievv) device then you need to download the flash tool, firmware file, and necessary drivers. So, without wasting any more time, let’s get into it.

Pre-Requirements:

• This ROM is supported for the Motorola One 5G UW Ace XT2113-1 (kievv) variant only.
• Make sure that your device should be charged at least 50% or higher.
• You will require a PC or Laptop with a USB Data Cable.
• We always recommend our readers take a full data backup of the device for safety purposes.
• Install Motorola USB Drivers and Rescue and Smart Assistant Tool on your PC
• To flash, you must download the ADB and Fastboot tool

Motorola One 5G UW Ace XT2113-1 Firmware Flash Files:

Firmware Installation Guide:

Check out the firmware flashing guide below for the Motorola One 5G UW Ace XT2113-1 (kievv). First, make sure to install or extract the adb and fastboot tool on your PC. Now enter the bootloader on your device.