Moto G50 Stock Firmware Collections [Unbrick, Restore To Stock ROM]

On this page, we have shared the download link and guide to install the Moto G50 (ibiza) firmware flash file using the ADB Fastboot method. To flash the Moto G50 back to stock ROM, you need the stock firmware zip files which you will find here.

If you are someone who wants to restore the device back to factory firmware, then this guide is for you. By using this guide, you can fix certain software-related issues such as hard brick, soft brick, WiFi, or Bluetooth issue, fix lag or stutter or even you can downgrade the device anytime.

Motorola Moto G50 Device Overview:

The Motorola Moto G50 features a 6.5-inch IPS LCD panel with a resolution of 720 x 1600 pixels and an aspect ratio of 20:9. This is a high refresh rate 90Hz panel. Under the hood, we get the Qualcomm Snapdragon 480 5G chip built on an 8 nm manufacturing process. It is an octa-core processor consisting of two Kryo 460 cores clocked at 2.0 GHz and six Kryo 460 cores clocked at 1.8 GHz. For handling the graphics-intensive tasks, we have the Adreno 619.

In terms of optics, we have a triple camera setup at the rear and a single camera at the front. The triple camera consists of a 48MP primary sensor paired with an f/1.7 lens, a 5MP macro sensor paired with an f/2.4 lens, and a 2Mp depth sensor paired with an f/2.4 lens. Coming to the front, we get a 13Mp primary sensor paired with an f/2.2 lens. Both the front and rear camera setups are limited to 1080 video recording.

There are two storage variants of this smartphone: 4GB RAM + 64GB internal storage and 4GB RAM + 128Gb of internal storage. In terms of communications, we get Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 5.0, GPS, NFC, FM radio, and USB Type-C 2.0. And for sensors, we get a rear-mounted fingerprint sensor, accelerometer, gyro, proximity, and barometer. Powering it all is a 5,000 mAh cell that supports 15W fast charging. The smartphone is available in two color options: Steel Gray and Aqua Green.

The Advantage of Stock Firmware

Flash Stock To Unbrick your Moto G50
Flash Stock ROM to Fix the boot loop problem
Upgrade and Downgrade Moto G50
Unroot or Fix Bugs on your Phone
To fix the lag or stutter on Moto G50.
By flashing Stock ROM, you can solve software problems.
Revert back to stock to gain your warranty.

Steps to Install Moto G50 Stock Firmware:

Before installing, make sure to follow the pre-requisite and install the necessary drivers and tools on your PC.

Pre-Requisites:

This ROM is supported only for Moto G50.
Download and Install the latest Motorola USB Drivers for Windows and MAC. [For All Android USB Drivers]
Download and extract the ADB fastboot tool on your PC (Fastboot Method)
Charge your phone to at least 60-70% before upgrading your Phone.
Take a complete backup (Recommended)
—–> How to Backup Your Android Phone Without ROOT
—–> Backup Your Android Apps and Data with Titanium Backup
—–> How to Backup Your Data on an Android device

Disclaimer

We at Getdroidtips.com cannot be held responsible if anything goes wrong. Take your own risk!

Download Flash Files:

Moto G50 Stock Firmware RETAIL XT2137-1:

Flash File Name: S1RFS32.27-25-1 Model: XT2137-1 Android Version: Android 12	Download
Flash File Name: S1RF32.27-25 Model: XT2137-1 Android Version: Android 12	Download
Flash File Name: RRFS31.Q1-59-76-5-5-3 Model: XT2137-1 Android Version: Android 11	Download
Flash File Name: RRFS31.Q1-59-76-5 Model: XT2137-1 Android Version: Android 11	Download
Flash File Name: RRFS31.Q1-59-76-2 Model: XT2137-1 Android Version: Android 11	Download
Flash File Name: RRF31.Q1-59-33-2 Model: XT2137-1 Android Version: Android 11	Download
Flash File Name: RRF31.Q1-59-33 Model: XT2137-1 Android Version: Android 11	Download

Instructions to Install: via ADB Sideload Method

Now go to the folder where you have extracted the ADB and Fastboot Tools.
Download Stock ROM for Moto from the above list of Moto Stock Firmware Collections and save it in the ADB folder.
Now Reboot Moto smartphone to Recovery Mode.
Select Apply Update from ADB.
Plug the Phone into PC using USB Cable, then open a command prompt window by pressing Shift Key + Right Mouse Click

Now execute the below command on the CMD screen.

fastboot flash partition gpt.bin 
fastboot flash bootloader bootloader.img 
fastboot flash vbmeta_system vbmeta_system.img 
fastboot flash vbmeta vbmeta.img 
fastboot flash radio radio.img 
fastboot flash bluetooth BTFM.bin 
fastboot flash dsp dspso.bin
fastboot flash logo logo.bin 
fastboot flash boot boot.img 
fastboot flash vendor_boot vendor_boot.img 
fastboot flash dtbo dtbo.img 
fastboot flash super super.img_sparsechunk.0 
fastboot flash super super.img_sparsechunk.1
fastboot flash super super.img_sparsechunk.2
fastboot flash super super.img_sparsechunk.3 
fastboot flash super super.img_sparsechunk.4 
fastboot flash super super.img_sparsechunk.5
fastboot flash super super.img_sparsechunk.6
fastboot flash super super.img_sparsechunk.7
fastboot flash super super.img_sparsechunk.8
fastboot flash super super.img_sparsechunk.9
fastboot erase userdata 
fastboot erase ddr 
fastboot oem fb_mode_clear 
fastboot reboot

Wait until the Installation process Completes.
Once the installation completed, reboot the Phone.

That’s it! Wait patiently until the flashing process completes if you have any queries related to the flashing process. Please leave a comment down below.

Manually Update Moto G50 Stock Firmware via Recovery

First of all, Go to Settings –> About Phone –> Tap on Build Number 7 Times.
Go to Developer Options –> Enable USB Debugging.
Download Android Nougat for Moto from above and save it in Internal storage.
Now Reboot Moto to Recovery Mode.
Select Apply Update from SD Card.
Select the Downloaded ZIP file from SD Card.
Wait until the Installation process Completes.
Once the installation completed, reboot the Phone.

That’s it!! You have successfully installed Stock Firmware On Moto G50 Smartphone.

I hope you installed the Stock ROM on Moto G50 successfully, Now please rate this website with your comment. We always welcome feedback and improvements.