Motorola Moto G22 XT2231-1, XT2231-2 Firmware Flash File

Step 1. Bootloader Mode

Enter bootloader mode on your phone. To boot first, turn your phone off. Once your device is turned off completely, press and hold the volume down, and turn it on. You should see the bootloader screen.

Step 2. Connect Your Device to PC:

After booting your Motorola G22 into bootloader mode, now connect it to the PC using the USB Cable.

Step 3. Download Stock ROM/Firmware:

To get the full ROM, you can use the LMSA or Rescue and Smart Assistant Tool. Download the zip file and copy it to somewhere on your PC. LMSA tool will unzip the file and will remove the zip file you downloaded.

You can also download the full stock ROM from the above download flash file section on this guide.

Step 4. Flashing Guide:

1. 1. The next step is to open the command window and go to the adb folder
   2. Enter the following command to flash the firmware

      fastboot oem fb_mode_set 
      
      fastboot flash partition gpt.bin
      
      fastboot flash bootloader bootloader.img
      
      fastboot flash vbmeta vbmeta.img 
      
      fastboot flash vbmeta_system vbmeta_system.img
      
      fastboot flash radio radio.img
      
      fastboot flash bluetooth BTFM.bin
      
      fastboot flash dsp dspso.bin
      
      fastboot flash logo logo.bin
      
      fastboot flash boot boot.img
      
      fastboot flash vendor_boot vendor_boot.img 
      
      fastboot flash dtbo dtbo.img
      
      fastboot flash recovery recovery.img
      
      fastboot flash super super.img_sparsechunk.0
      
      fastboot flash super super.img_sparsechunk.1
      
      fastboot flash super super.img_sparsechunk.2
      
      fastboot flash super super.img_sparsechunk.3
      
      fastboot flash super super.img_sparsechunk.4
      
      fastboot flash super super.img_sparsechunk.5
      
      fastboot flash super super.img_sparsechunk.6
      
      fastboot flash super super.img_sparsechunk.7
      
      fastboot flash super super.img_sparsechunk.8
      
      fastboot flash super super.img_sparsechunk.9
      
      fastboot flash super super.img_sparsechunk.10
      

   3. Toggle back to bootloader. Do the following:

      fastboot reboot bootloader 
      fastboot erase ddr 
      fastboot erase userdata (Optional except you want to wipe) 
      fastboot reboot

   4. Now your device will reboot into bootloader with the firmware you installed.

That’s it, guys. We hope this guide was helpful to you. Feel free to ask in the comment below for additional queries.