Moto G20 Stock Firmware Collections [Unbrick, Restore To Stock ROM]

Motorola launched their new smartphone Moto G20 globally with a 90Hz LCD display, Unisoc T700 processor, 4GB RAM, and Quad camera in the rear. The device comes out of the box with Android 11.

On this page, we have shared the download link and guide to install the Moto G20 (java) firmware flash file using the ADB Fastboot method. To flash the Moto G20 back to stock ROM, you need the stock firmware zip files which you will find here.

If you are someone who wants to restore the device back to factory firmware, then this guide is for you. By using this guide, you can fix certain software-related issues such as hard brick, soft brick, WiFi, or Bluetooth issue, fix lag or stutter or even you can downgrade the device anytime.

 

Motorola Moto G20 Device Overview:

The Moto G20 features a 6.5-inches IPS LCD panel with a resolution of 720 x 1600 pixels and an aspect ratio of 20:9. This is a high refresh rate panel with a 90Hz refresh rate. In terms of processing power, we get the Unisoc T700 chipset which is an octa-core processor. It comes with eight cores clocked at 1.8 GHz. And for graphics-intensive tasks, we have Mali G52. The processor is a bit on the weaker side, but it will work fine with basic day to day applications.

We have a quad-camera setup at the rear and a single camera setup at the front in terms of optics. The quad rear camera consists of a 48MP primary sensor paired with an f/1.7 lens, an 8Mp ultrawide sensor paired with an f/2.2 lens, a 2MP macro sensor paired with an f/2.4 lens, and a 2MP depth sensor paired with an f/2.4 lens. The front camera is a 13MP sensor paired with an f/2.2 lens. Both the front and the rear camera setup is limited to 1080p video recording at 30fps.