Download and Install Lineage OS 19.1 for Xiaomi Redmi Note 3 (Android 12)

Xiaomi Redmi Note 3 (kenzo) was launched in January 2016. The phone came out of the box with Android 5.1.1 Lollipop and later received Android 6.0 Marshmallow. In this tutorial, we will guide you to install the latest Lineage OS 19.1 on the Redmi Note 3 (kenzo) smartphone. We have given the complete instructions, downloads, and useful updates in the future.

As we all know, Lineage OS 19.1 is based on Android 12 which is the 12th major release by Google and brings many new features and improvements. One of the biggest changes that Android 12 brings to your device is the Material You design language. It is aimed to enhance personalization on the device by allowing users to pick a custom color palette and new widgets.

Xiaomi Redmi Note 3 Specification:

Xiaomi Redmi Note 3 was launched on March 3, 2016. This device features a 5.5-inch IPS LCD display with a resolution of 1080 x 1920 pixels, offering a pixel density of about 403 ppi. Running on Android 5.1.1 (Lollipop) and upgradable to Android 6.0.1 (Marshmallow) with MIUI 9.5, the phone is powered by a Qualcomm Snapdragon 650 chipset, a hexa-core CPU configuration, and an Adreno 510 GPU. It comes in two memory configurations: 16GB storage with 2GB RAM and 32GB storage with 3GB RAM.

The camera setup includes a 16MP single rear camera with f/2.0 aperture and phase-detection autofocus, while the front-facing camera is 5MP with f/2.0 aperture. The device features a rear-mounted fingerprint sensor, and offers standard connectivity options like Wi-Fi, Bluetooth 4.1, GPS, GLONASS, and BDS. It has a 3.5mm headphone jack, FM radio with recording capabilities, and an infrared port. Xiaomi Redmi Note 3 is equipped with a non-removable 4050mAh Li-Po battery with 10W wired charging support. It had color options such as Silver, Gray, and Gold, and its SAR values are within acceptable limits.

Android 12 and Its Features

Android 12 is all about improved personalization and revamped user interface that changes the way to bring more dynamic expression and a whole new design element. It’s a successor of the last-gen Android 11 which was basically focused on the privacy and security of the user data. While the Android 12 not only focused on privacy features but also on visual treatment.

Talking about the features, it has all new and colorful yet minimal widgets that are now more dynamic than ever before. While the dynamic theme with the wallpapers is more expressive as per your mood. The notification shade, lock screen, and its notifications, glance screen, volume controls, quick shortcut tiles, new power menu, transitions or animations, etc everything looks & feels great whatsoever with the ‘Material You’ design.

Meanwhile, the impressive Privacy Dashboard feature, the privacy indicator on the top of the screen is also great. Whereas scrolling screenshot support, improved notifications, quick reply feature, on-device search feature, easy Wi-Fi sharing, one-handed mode, quick back tap feature, haptic-coupled audio effect, Android 12 updates via Google Play, App hibernation, all-new emojis, improved auto-rotate, and a lot more.

How to Install Lineage OS 19.1 on Redmi Note 3

As the title suggests, here we’ve shared the requirements and steps to flash the Lineage OS 19.1 on the Xiaomi Redmi Note 3 variant.

Before heading over to the guide, make sure to follow all the requirements below.

Pre-Requisites

Before we begin with this procedure, I would strongly recommend you create a backup of your device storage and all your files stored on your device. Moreover, it is advised to follow the steps mentioned in this post very carefully to avoid permanent damage or to brick your device.

Charge Your Phone

It’s highly recommended to charge your handset before unlocking the bootloader to avoid your device from shutting down occasionally while going through the process. Make sure to keep at least 50% of charge or higher for a smooth operation.

Download ADB and Fastboot Binaries

You can skip this adb and fastboot part if you have already installed TWRP Recovery on your Xiaomi Redmi Note 3.

Using the ADB and Fastboot command (platform-tools), you’ll be able to boot your Android device into the bootloader mode (download mode) which will be easy for you to proceed with further steps. ADB (Android Debug Bridge) creates a connection or bridge between the device and computer to sideload files.

Whereas Fastboot is a more advanced command utility tool for Android devices that works with computers. You can download ADB and Fastboot Binaries (Platform-Tools).

Download Xiaomi USB Drivers

A USB Driver is a set of files that basically allows you to create a successful and strong connection between a mobile device with a computer properly using a USB data cable. It’ll be useful to transfer files between the connected devices, flash files on the handset, and more.

It’s also worth mentioning that not only mobile devices but also other external devices can use and run USB Drivers on a Windows computer. Such as a mouse, keyboard, printer, external hard drives, speakers, USB flash drives, etc. You can grab Xiaomi USB Drivers here.

Unlock Bootloader Your Phone:

To enjoy any custom ROM, you must first unlock the bootloader on your Xiaomi Redmi Note 3.

Install TWRP Recovery:

You have to install TWRP Recovery on your phone to install any custom ROM on your device. After unlocking the bootloader, you can follow our guide to install TWRP Recovery on your Xiaomi Redmi Note 3.

Download Lineage OS 19.1 ROM:

Here, you will find the Lineage OS 19.1 for Redmi Note 3.

Lineage OS 19.1

Download Link

Download Android 12 Gapps:

It’s worth mentioning that most of the third-party AOSP (Android Open Source Project) ROMs (also known as aftermarket firmware) come without any preinstalled Google apps package. You can manually install the Android 12 GApps by following our guide.

Warning!

GetDroidTips won’t be responsible for any kind of issue that may happen to your device if you flash it on another device and brick it. Do it at your own risk.

Instructions to Install:

Connect your device to the PC via USB cable. Make sure USB Debugging is enabled.
Then head over to the platform-tools folder, type in CMD in the address bar, and hit Enter. This will launch the Command Prompt.
Execute the below command in the CMD window or enter recovery mode by using the Volume and Power button combination. your device to TWRP Recovery:
```
adb reboot recovery
```
Now head over to the Install section and navigate to the downloaded vendor and firmware. Perform a right swipe to flash it.TWRP Home
If you want Google Apps as well, then you need to flash it at this instance itself. Go to Install, select the GApps ZIP file, and perform a right swipe to flash this file.
When that is done, you may reboot your device. Head over to Reboot and select System.

Your device will now boot to the newly installed OS. With this, we conclude the guide on how to install the Lineage OS 19.1 on Redmi Note 3. Do keep in mind that the first boot might take up some time and you might have to set up your device from scratch.