Fix: STAR WARS Jedi Survivor Screen Flickering or Tearing Issue on PC
Star Wars Jedi: Survivor, a thrilling action-adventure game, serves as the highly anticipated sequel to Star Wars Jedi: Fallen Order. Developed by the renowned...
Abd Razaaq
Last updated on July 8, 2023
Abd Razaaq
Author
I'm a Tech Content Writer and Full-Time blogger. Since I love Android and Google's device, I started my career in writing for Android OS and their features. This led me to start "GetDroidTips". I have completed Master of Business Administration at Mangalore University, Karnataka.
Star Wars Jedi: Survivor, a thrilling action-adventure game, serves as the highly anticipated sequel to Star Wars Jedi: Fallen Order. Developed by the renowned Respawn Entertainment and published by Electronic Arts, this captivating gaming experience is available on multiple platforms, including PlayStation 5, Windows, and Xbox Series X/S. However, some players are experiencing multiple issues with the STAR WARS Jedi Survivor, and the Screen Flickering or Tearing Issue on the PC is one of them.
Now, if you’re also one of the victims of such an issue, don’t worry because here, we’ve shared the troubleshooting guide for you that should help you out. For years, screen flickering, screen tearing, or even the freezing issue has been quite common among PC games. You might encounter such issues multiple times, no matter your game. But there are some ways to fix this issue that you can check out easily.
Fix: STAR WARS Jedi Survivor Screen Flickering or Tearing Issue on PC
We should mention that if you’re facing the screen flickering or tearing issue while playing the multiplayer game modes or during any specific sessions or even during any particular checkpoints, you should check out whether your internet connection is working properly. Sometimes in-game graphics settings may also trigger these issues whatsoever. Some reports also indicate that screen shimmering occurs during the cutscenes.
Whereas it’s also worth recommending cross-checking the V-Sync option for the STAR WARS Jedi Survivor game because that can trouble you a lot for some titles on the PC. So, until the problem gets fixed for you, make sure to follow all the methods one by one. Now, without wasting any more time, let’s jump into it.
1. Enable V-Sync in Nvidia Control Panel
It’s recommended to turn on the Vertical Sync feature on your Nvidia Control Panel app for the STAR WARS Jedi Survivor game to avoid graphical glitches up to some extent. Remember that this method only applies if you’re using an Nvidia graphics card.
Launch the Nvidia Control Panel from the Start menu. If it’s not installed, go to Microsoft Store and install it.
In the Nvidia Control Panel interface, go to ‘3D Settings’ > Select ‘Manage 3D settings’.
Select ‘Program Settings’ > Click on ‘Add’ and select ‘STAR WARS Jedi Survivor’ from the list of programs on your PC.
If the game application isn’t listed, click ‘Browse’ and head over to the installed STAR WARS Jedi Survivor directory on the drive. Simply locate the STAR WARS Jedi Survivor folder and add the HaloInfinite.exe application > Then select the game in the list and add it.
Now, scroll down to ‘Vertical sync’ > Click on it and select ‘On’ to enable it. This will force the STAR WARS Jedi Survivor game to use V-Sync every time.
Restart your computer to apply changes and play the game to check for the issue again.
First, you should try lowering the in-game graphics settings on your PC or console to check if that helps you fix the frame drops or stuttering issues. Try turning off some of the display settings for the STAR WARS Jedi Survivor game, such as texture details, shadow effect, v-sync, anti-aliasing, etc. This should improve the FPS count and performance/smoothness in gameplay.
3. Update GPU Drivers
If in case, you haven’t updated your graphics driver on the Windows computer, then make sure to install the latest patch version. To do so, you’ll need to check for available updates by following the steps below:
Press Windows + X keys to open the Quick Link Menu.
Now, click on Device Manager from the list > Double-click on Display adapters.
Right-click on the dedicated graphics card that you’re using.
Next, select Update driver > Choose to Search automatically for drivers.
If an update is available, the system will automatically download & install it.
Once done, restart the computer to apply changes immediately.
4. Close Unnecessary Background Tasks
Another thing you can do is simply close unnecessary background tasks on your PC to ensure there is no additional consumption of system resources happening in the background. Make sure to keep STAR WARS Jedi Survivor, Steam, and other system-related tasks running as it is. To clear out background tasks:
Press the Ctrl + Shift + Esc keys to open Task Manager.
Click on the Processes tab > Select the task you want to close.
Once selected, click on End Task. Make sure to do the steps for each task individually.
Finally, just restart your computer to change effects immediately, and check for STAR WARS Jedi Survivor screen flickering or tearing issue.
5. Check Your Internet Connection
You should also try checking for the internet connection on your PC whether it’s running well or not. A slower internet speed or unstable connectivity can cause issues with the game launching or fetching data from the server. You can also try switching the internet connection from wired (ethernet) to wireless (Wi-Fi) to cross-check the network connectivity problem.
If your IP address has some issues or your DNS address is troubling you a lot then make sure to use the Google DNS address on the PC to avoid rubberbanding connection or stuttering or even lagging issues which can happen due to slow internet.
6. Update STAR WARS Jedi Survivor
Sometimes an outdated game version can also bring multiple bugs or issues. Updating your STAR WARS Jedi Survivor game is better by following the steps below. If an update is available then install the latest patch. To do this:
Steam Users
Open the Steam client > Go to Library > Click on STAR WARS Jedi Survivor from the left pane.
It’ll automatically search for the available update. If there is an update available, make sure to click on Update.
It may take some time to install the update > Once done, make sure to close the Steam client.
Finally, reboot your PC to apply changes, and then try launching the game again.
Epic Launcher Users:
Open the Epic Launcher client > Go to Library > Look for STAR WARS Jedi Survivor from the left pane.
On your STAR WARS Jedi Survivor application, you have to tap on the three-dot icon.
Make sure to check the auto-update to get a new update installation automatically.
It’ll automatically search for the available update. If there is an update available, make sure to click on Update.
Finally, reboot your PC to apply changes, and then try launching the game again.
For EA:
To update your games on the EA App (formerly known as EA Desktop and Origin), follow these steps:
Launch the EA App on your computer.
Sign in to your EA Account.
Click on the “My Collection” tab to view your game library.
The EA App will automatically check for updates when it’s launched. You will see an “Update” or “Download” button on the game tile if an update is available for any of your games.
Click the “Update” or “Download” button on the game tile to download and install the update.
You can monitor the update’s progress by checking the download status bar on the game tile or in the “Downloads” section of the app.
Once the update is complete, the button on the STAR WARS Jedi Survivor game tile will change to “Play” or “Resume,” indicating that the game is up-to-date and ready to be launched.
7. Verify Integrity of Game Files
If in case, there is an issue with the game files and somehow it gets corrupted or missing then make sure to perform this method to easily check for the issue.
Verify Game Files on Steam:
Launch Steam > Click on Library.
Right-click on STAR WARS Jedi Survivor from the list of installed games.
Now, click on Properties > Go to Local Files.
Click on Verify Integrity of Game Files.
You’ll have to wait for the process until it gets completed.
Go to My Game Library > Select F1 2022 from the list of installed games.
Now, click on the Settings icon > Select Repair.
Wait for the client to do the job for you.
Once done, make sure to close the client, and restart the PC to change effects immediately.
For EA Desktop:
Open the EA Desktop client > Go to ‘My Collection’.
Now, right-click on STAR WARS Jedi Survivor from the list of games.
Click on Repair and wait for the verification process to be completed.
Once done, make sure to restart the computer to apply changes.
8. Set High Performance in Power Options
If in case, your Windows system is running on the Balanced mode in Power Options, just set the High-Performance mode for better results. Although this option will take higher power usage or battery usage. To do this:
Click on the Start Menu > Type Control Panel and click on it from the search result.
Now, go to Hardware and Sound > Select Power Options.
Click on High Performance to select it.
Make sure to close the window and fully shut down your computer. To do this, click on the Start Menu > Go to Power > Shut Down.
Once your computer is fully turned off, you can power it on again.
9. Set High Priority in Task Manager
Make your game priority in the higher segment via the Task Manager to tell your Windows system to run the game properly. To do this:
Right-click on the Start Menu > Select Task Manager.
Click on the Processes tab > Right-click on STAR WARS Jedi Survivor game task.
Select Set Priority to High > Close Task Manager.
Finally, run STAR WARS Jedi Survivor game to check if it crashing on PC or not.
10. Update Windows
Updating Windows OS build is always essential for PC users as well as PC gamers to reduce system glitches, compatibility issues, and crashes. Meanwhile, the latest version mostly includes additional features, improvements, security patches, and more. To do that:
Press Windows + I keys to open up the Windows Settings menu.
Next, click on Update & Security > Select Check for updates under the Windows Update section.
If there is a feature update available, select Download and install.
It may take a while to complete the update.
Once done, restart your computer to install the update.
That’s it, guys. We assume this guide was helpful to you. For further queries, you can comment below.
