Updated on May 29, 2018: Here we will list all the Stock Firmware Collection for Huawei P10 Lite smartphone. You can flash the Stock Firmware on Huawei P10 Lite using the below guide on How to Install Huawei P10 Lite Stock firmware. In this list, we will update all the region Huawei P10 Lite Stock Firmware collection. Stock ROM on Huawei P10 Lite came out of the box with Android Marshmallow with EMUI 5.1 Skin. Huawei P10 Lite was first showcased on MWC Barcelona in February 2017.
About Huawei P10 Lite:
Huawei P10 Lite was launched in February 2017 at an event Mobile World Congress, Barcelano. It which comes with 5.2-inches display with a screen resolution of 1920×1080 pixels. The smartphone is powered by octa-core HiSilicon Kirin 658 coupled with 4 GB of RAM. The phone packs 32GB internal memory which can also be expanded up to 256GB via microSD card. The camera on the Huawei P10 Lite comes with 12MP rear Camera and 8MP front shooting camera.
Huawei P10 Lite runs on Android 7.0 Nougat out of the box with a non-removable battery of 3000mAh power. The handset supports a dual sim with 4G on both slots. It comes with connectivity options such as Bluetooth, Wifi, USB OTG, FM, 3G, and 4G.
List of Huawei P10 Plus Stock Firmware collection
Check: Huawei P10 Lite Official Android 8.0 Oreo Update
| Device Model No |
Build Number |
OS |
Region |
| WAS-L01 |
WAS-L01C02B364 |
8.0 |
Vodafone, Europe |
| WAS-L21 |
WAS-L21C185B360 |
8.0 |
Middle-East |
| WAS-L23 |
WAS-L23C605B360 |
8.0 |
Latin America |
| WAS-TL10 |
WAS-TL10C00B331 |
|
China |
| WAS-L22J |
WAS-L22JC635B321 |
8.0 |
Japan |
| WAS-AL00 |
WAS-AL00C00B330 |
8.0 |
China |
| WAS-TL10 |
WAS-TL10C00B330 |
8.0 |
China |
| WAS-L01 |
WAS-L01C185B321 |
8.0 |
Middle-East |
| WAS-L21 |
WAS-L21C185B321 |
8.0 |
Middle-East |
| WAS-L21A |
WAS-L21AC185B185 |
7.0 |
Middle-East |
| WAS-L01 |
WAS-L01C432B208 |
7.0 |
Europe |
| WAS-L29 |
WAS-L29C432B207 |
7.0 |
Europe |
| WAS-L01A |
WAS-L01AC40B213 |
7.0 |
tef |
| WAS-L03T |
WAS-L03TC557B205 |
7.0 |
Bell, Canada |
| WAS-L21 |
WAS-L21C432B196 |
7.0 |
Europe |
| WAS-L21A |
WAS-L21AC767B190 |
7.0 |
Spain |
| WAS-LX1 |
WAS-LX1C185B177 |
7.0 |
Middle East |
| WAS-L01C/L21 |
WAS-L01C432B191/B192 |
7.0 |
Europe |
| WAS-LX1A |
WAS-LX1AC530B171 |
7.0 |
Bytel France |
| WAS-LX1 |
WAS-LX1AC113B170 |
7.0 |
Italy Wind |
| WAS-LX1 |
WAS-LX1C185B172 |
7.0 |
Middle-East |
| WAS-LX1 |
WAS-LX1C185B173 |
7.0 |
Middle-East |
| WAS-L01 |
WAS-L01C432B183 |
7.0 |
Europe |
| WAS-L01 |
WAS-L01C432B182 |
7.0 |
Europe |
| WAS-L21 |
WAS-L21C432B182 |
7.0 |
Europe |
| WAS-L22J |
WAS-L22JC635B172 |
7.0 |
Japan |
| WAS-LX1A |
WAS-LX1AC440B171 |
7.0 |
UK |
| WAS-LX1A |
WAS-LX1AC530B170 |
7.0 |
Bytel France |
| WAS-LX1 |
WAS-LX1C10B170 |
7.0 |
Russia |
| WAS-LX1A |
WAS-LX1AC440B170 |
7.0 |
UK |
| WAS-LX2J |
WAS-LX2JC635B170 |
7.0 |
Japan |
| WAS-L03T |
WAS-L03TC605B170 |
7.0 |
Latin-America |
| WAS-LX1A |
WAS-LX1AC530B131 |
7.0 |
Bytel France |
| WAS-LX1A |
WAS-LX1AC55B126 |
7.0 |
Italy |
| WAS-L03T |
WAS-L03TC635B120 |
7.0 |
Latin America |
| WAS-L21 |
WAS-L21C10B130 |
7.0 |
Russia |
| WAS-L01A |
WAS-L01AC432B131 |
7.0 |
Europe |
| WAS-LX1A |
WAS-LX1AC440B130 |
7.0 |
UK |
| WAS-L21A |
WAS-L21AC432B130 |
7.0 |
Europe |
| WAS-LX1A |
WAS-LX1AC109B110 |
7.0 |
Orange (Carrier) |
| WAS-LX1A |
WAS-LX1AC530B130 |
7.0 |
Bytel, France |
| WAS-LX1A |
WAS-LX1AC02B114 |
7.0 |
Germany |
How to Install Official Huawei P10 Lite Stock Firmware
Pre-Requisite :
- This Guide is only for Huawei P10 Lite users.
- You need MicroSD Card or internal memory space to try any Stock ROM
- A Micro SD card of 8GB or more should be available. It is recommended that The Micro SD card is made by Sandisk, Kingstone, or Kingmax.
- Make sure you have enough battery to run the upgrade process. It is recommended that the power of the battery is more than 30%.
- Upgrade operations may erase all your user data. So if there is some important information, you should backup them before the upgrade. Follow Complete Backup Guide to backup your phone.
- Before flashing, you should unzip the SDupdate_Package.tar.gzfile,and get out UPDATE.APP to do upgrade operation in your SD Card. To unzip, we may sometime share two zip file, Update.zip package always comes with the main update.app which is a complete OS. Where has data file comes with data files from Huawei? Check the below file list.
└ —> dload
├ –> DUK-L09_hw_eu│ └ –> update_data_hw_ eu.app├–> UPDATE.APP
- There are two methods to upgrade your phone. One is a Normal upgrade and Force Upgrade
- GetDroidTips.com is not responsible for any damage to your phone while installing this Update.
- Make sure that you have latest USB drivers installed
- Take the complete backup of your phone and then proceed.
What is Normal Upgrade and Force Upgrade?
The normal upgrade needs to start the handset and enter the System Update module. Force upgrade is just used when the handset can’t boot up or can’t enter the idle screen.
So let’s move into upgradation process. First, we will guide the Normal Upgradation Process.
Normal Upgrade
- First of all, Download the Update Package
- Recommended: Format the Micro SD card (This operation is optional).
- Now Unzip the Update.zip package and
- Copy the entire dload folder (with UPDATE.APP in it) to the root directory of the Micro SD card.
- Now on your phone, Open the dialer and call ->enter: *#*#2846579#*#* ->ProjectMenu->Software Upgrade->SDCard Upgrade->OK，
- Now select the Update.app that you moved to SD Card (root directory).
- Now you will see a screen which shows the installation process.
- Wait until the installation process completes.
- When the progress bar stop, the phone will restart automatically
- In case if you have the Data File and you want to flash it, then, first of all, delete the earlier moved update.app from the dload folder
- then you can extract the second file (update_data_Xxxxx) from above and move the new update.app to the dload folder.
- repeat the same 4-8 Steps above.
- That’s it! You have Installed Stock Firmware on Huawei Smartphone.
Force Upgrade
- First of all, Download the Update Package
- Recommended: Format the Micro SD card (This operation is optional).
- Now Unzip the Update.zip package and
- Copy the entire dload folder (with UPDATE.APP in it) to the root directory of the Micro SD card.
- After Copying the Update.app, Turn off your phone.
- Make sure your handset is power off.
- Now Press the VOLUME UP and VOLUME DOWN key, and then press the POWER key to power on the phone and enter the Software Upgrade Mode.
- When the progress bar stop, the phone will restart automatically.
- To Update the Data File, You can follow the Normal Upgrade.
That’s it !! I hope you have flashed the new firmware successfully.
- By step:Settings->About phone->Build number, to check the versionis correct or not.
I Hope you successfully flashed Huawei P10 Lite Stock firmware.
posseggo un p10 lite brand wind single sim vorrei installare un rom europea per usarlo come dual sim .
sepuoi aiutarmi ho provato in tanti modi ma non sono riuscito.
ti ringrazio .gennaro
modello WAS-LCIA