How to Install Stock ROM on Huawei Y9 2019 JKM-AL00, JKM-TL00

Huawei Y9 2019 was launched in the year 2018 which came out of the box with Android 8.0 Oreo under EMUI 8 skin. It is powered by Kirin 710 processor. In this tutorial, we will guide you on how to flash the stock firmware file on Huawei Y9 2019 JKM-AL00, JKM-TL00.

To install the firmware flash file on Huawei Y9 2019 JKM-AL00, JKM-TL00, you need to download the software called Huawei Flash tool. This method is simple and easy.

Advantages of Stock ROM:

Here are the answers to why you need to download and save the Huawei Y9 2019 JKM-AL00, JKM-TL00 Stock ROM flash file on your computer.

If your device is dead, you can unbrick using the Stock ROM file
You can fix or repair the IMEI on your device using DB files from Stock ROM
Remove any malware or Adwares from Huawei Y9 2019
You can fix the boot loop issue on the Huawei Y9 2019
Fix Unfortunately, the app has stopped error on Huawei Y9 2019
Fix Network related issue
Patch Boot image to Root using Magisk
You can unroot Huawei Y9 2019
To Reset or Remove FRP on your device
Restore Huawei Y9 2019 back to Factory State

Huawei Y9 2019 JKM-AL00, JKM-TL00 Firmware Flash Files:

Flash File Name: JKM-AL00 9.1.0.226(C00E33R4P2T8) Model: JKM-AL00 Android Version: 8.0 Oreo EMUI: 8	Download
Flash File Name: JKM-TL00 9.1.0.224(C00E33R4P2T8) Model: JKM-TL00 Android Version: 8.0 Oreo EMUI: 8	Download

Steps to Install Huawei JKM-AL00, JKM-TL00 Firmware Flash File

If you have downloaded the firmware, then follow this guide to flash the stock firmware manually on your Huawei Y9 2019 JKM-AL00, JKM-TL00. Make sure to follow the steps carefully.

Pre-Requirements:

This ROM is supported for the Huawei Y9 2019 JKM-AL00, JKM-TL00 variant only.
Make sure that your device should be charged at least 50% or higher.
You will require a PC or Laptop with a USB Data Cable.
We always recommend our readers take a full data backup of the device for safety purposes.
Download Huawei Multi-Download Tool on your PC and install it.
Download Huawei USB Drivers on your PC
You will also require to Download Huawei Handset Product Line Driver and install it.

Disclaimer:

GetDroidTips will not be held responsible for any kind of hardware or software damage to your device by following this guide. Proceed at your own risk

Firmware Installation Guide:

Check out the firmware flashing guide below for the Huawei Y9 2019 JKM-AL00, JKM-TL00.

1. SD Card Update Method

Create a new folder called dload on your MicroSD card.
Extract the downloaded firmware zip file on PC > Copy the UPDATE.APP file into the dload folder on your MicroSD card.
Switch off your handset > Long-press Vol Up + Vol Down + Power key together for a few seconds until the fastboot mode appears.
You’ll see ‘Installing system update’ > Wait for a while > Your device will automatically reboot after flashing.

2. Manually Flash Stock ROM

First of all, Download and extract the Huawei smartphone Multi Download Tool on your computer.
Now, Download and Install the Huawei Handset Product Line Driver and Huawei USB Driver your PC.
Launch the QPBLFBML01.exe file to open the Huawei Multi-Download Tool.
Next, you will see the XML firmware file upload option.
Click on the Browse button (three-dot icon) and it will ask for the password.
Don’t put anything, just leave it blank and click on the Set button.
Now, select the .xml firmware file for your device and click on Open.
Then click on the Next button.
You will see the installation progress page. Connect your device via a USB cable with the Fastboot or Download Mode.
Next, click on the Scan&Download button to start flashing the stock firmware.
It will automatically detect the Fastboot device and will take some time to install it.
Once flashing done, restart your device.

Full Instruction Guide

That’s it, guys. We hope this guide was helpful to you. Feel free to ask in the comment below for additional queries.