3. Maintain Battery Charge
It’s always recommended to check whether your handset is fully charged or not. Even if it’s not fully charged, just make sure to maintain at least a 50%-60% charge level before performing any task to avoid occasional shutdowns or battery juice run out issues.
4. Get Ready a Computer and a USB Cable
Before flashing the firmware file on your handset using a flash tool, you’ll require a PC/Laptop and a USB Data Cable to connect your handset to the PC. Once connected, you can flash the downloaded firmware on your device via the flash tool.
Disclaimer:
GetDroidTips won’t be held responsible for any kind of issue that occurs on your phone by following this guide. Make sure what you’re doing and proceed at your own risk
Additionally, make sure to download all the required flash files on your PC before you try this guide.
Download Flash Files:
| Firmware Details |
Download Links |
Flash File Name: LGH830_LGH830SV_H83010i_00_0824_6.0.zip
File Size: 2 GB |
Download |
Firmware Installation Guide:
Without further ado, let’s get into the firmware installation process below.
- We assume that you’ve already installed both the LG USB Driver and LG Flash Tool on your PC. [If not done yet, do this first]
- Next, boot your LG handset in the Download Mode. Just press and hold the Volume Up button of the phone > Connect your device to the PC via a USB cable (Don’t release the volume up button)
- Once connected, you can release the power button.
- Now, open the LGFlashTool.exe file > The flash tool interface will appear.
- Choose CDMA from the Select Type drop-down list.
- Then click on the Select File (folder icon) to browse and choose the firmware file for your LG model.
- So, choose the KDZ firmware file and click on Open.
- Now, click on the Normal Flash option below.
- The Read Phone Information window will appear.
- Just click on the START button.
- Next, you’ll have to choose the language and country from the Select Country & Language pop-up.
- Once done, click on OK to begin the firmware flashing process.
- It generally takes a couple of minutes to complete the flashing process depending on the firmware file size.
- Once the flashing is done, your handset will restart automatically.
- Again booting your device for the first time after firmware flashing can take a couple of minutes.
- Once your mobile turned on, just disconnect the USB cable from the handset.
- Enjoy!
Follow Complete Tutorial
That’s it, guys. We hope you’ve found this guide pretty helpful. Feel free to ask in the comment below for additional queries.