Download Samsung Galaxy Z Fold 6 Firmware Flash File

On this page, we have shared the download link and guide to installing the Samsung Galaxy Z Fold 6 binary 1 U1 firmware flash file using the Samsung Flash Tool (Also known as Odin Flash Tool). Here, you will find all stock firmware zip files for all the supported regions with Samsung Galaxy Z Fold 6.

In case you’re looking to reset your device to its factory firmware, you’ve come to the right place. With the help of this guide, you can resolve any software-related problems you might be facing, such as hard or soft bricking, WiFi or Bluetooth connectivity issues, lag, stutter, and even downgrade your device whenever needed.

Samsung Galaxy Z Fold 6 Device Overview:

The Samsung Galaxy Z Fold 6 features 7.60-inch AMOLED display with a 120 Hz refresh rate and a resolution of 1856×2160 pixels (374 ppi). It also has a secondary 6.30-inch AMOLED display with a resolution of 968×2376 pixels (412 ppi). Both displays are protected by Gorilla Glass Victus 2. It is powered by an octa-core Snapdragon 8 Gen 3 processor and equipped with 12GB of RAM, the Galaxy Z Fold 6 runs on Android 14 with Samsung’s One UI 6.1.1. It houses a 4400mAh battery supporting both wireless and proprietary fast charging.

The phone boasts a triple rear camera setup: a 50-megapixel primary sensor (f/1.8), a 12-megapixel ultra-wide sensor (f/2.2), and a 10-megapixel telephoto sensor (f/2.4), all with autofocus. For selfies, it has a dual front camera setup with a 10-megapixel primary sensor (f/2.2) and a 4-megapixel secondary sensor (f/1.8, 2.0-micron pixel size).

The Galaxy Z Fold 6 comes with storage options of 256GB, 512GB, and 1TB. It supports dual SIM (Nano-SIM) and measures 153.30 x 132.60 x 5.60mm, weighing 239 grams. It is available in Silver Shadow, Pink, Navy, Crafted Black, and White colors.

Connectivity options include Wi-Fi 802.11 a/b/g/n/ac/ax, GPS, Bluetooth v5.3, NFC, USB Type-C, and support for 3G, 4G, and 5G networks. The device also features sensors like an accelerometer, ambient light sensor, barometer, compass/magnetometer, gyroscope, proximity sensor, and fingerprint sensor.

Samsung Galaxy Z Fold 6 Flash Files:

Steps to Install Firmware File on Galaxy Z Fold 6

Before we proceed with the steps to install the Stock Firmware on your Samsung Galaxy Z Fold 6, let’s take a look at the prerequisites.

Pre-Requirements: 

• This Guide is for Samsung Galaxy Z Fold 6
• You need a Windows PC/Laptop and a USB cable to flash the firmware.
• Charge your device with a minimum of 50% battery backup.
• You have to download the latest Samsung USB Drivers and install them on your PC.
• Make sure that you have ODIN Software installed on your PC.
• Take a backup of your device (No Root) before doing anything.

Now, let’s take a look at the Steps to flash the firmware file on Samsung Galaxy Z Fold 6.

Instructions to Install:

1. Download the Samsung Galaxy Z Fold 6 flash file
2. Extract the contents of the firmware flash file zip.
3. Launch the ODIN application
4. Load the firmware files in their appropriate section
5. Once you have loaded, connect your phone to the computer (make sure to boot your device into download mode)
6. Notice that the CO port will light up on Odin once you connect your phone.
7. Click the Start button to install the firmware on your Samsung device.
8. That’s it! You will see a PASS message once the installation is complete.

Follow Complete Guidelines | Video Tutorial

We hope that this guide will be helpful to you. If you’re facing any issues, feel free to ask in the comments below.