- Open the Settings app.
- Tap Device Care.
- Tap the 3-dot at the top.
- Select Auto restart.
Wait for Battery to Die and then Charge it
The next thing that you want to do is to allow the battery to drain. Depending on how much is the remaining power, you may be looking at a few hours to days.
There’s no way to hasten the phone’s battery drain rate so all you have to do is wait. Turning off the device is a requirement to perform the rest of the suggestions below. After turning off the phone don’t attempt to power it back on for a minute.
Then now charge it. If charging the device is successful and your Note10+ restarts normally, make sure to recalibrate the OS and battery. Here’s how to do it:
- Drain the battery completely. This means using your device until it powers down on its own and the battery level reads 0%.
- Charge the phone until it reaches 100%. Be sure to use original charging equipment for your device and let it charge up completely. Do not unplug your device for at least two more hours and also don’t use it while charging.
- After the elapsed time, unplug your device.
- Restart the device.
- Use your phone until it completely runs out of power again.
- Repeat the above steps.
Boot to Safe mode
In case you don’t know what is safe mode, in safe mode, the system temporarily disable all third-party applications you installed on your device. By doing this we can figure out which app is occurring the problem. Follow the below step to turn Safe Mode on:
- Turn OFF the device.
- Press and hold your device’s Power button till the model name screen.
- When the SAMSUNG logo appears on the screen, release the Power key.
- Immediately after releasing the Power key, press and hold the Volume down key.
- Continue to hold the Volume down key until the device finishes restarting.
- Safe mode will display in the bottom left corner of the screen.
- Release the Volume down key when you see Safe Mode.
Safe Mode may be a useful trick in checking for a problem but it won’t pinpoint the exact app. In order to identify which of your apps may be behind the problem, you’ll have to do a process of elimination. Here’s what you need to do exactly:
- Boot Galaxy to safe mode.
- Check for the problem.
- If the issue returns or once you’ve confirmed that a third-party app is to blame, you can start uninstalling apps one by one. You’ll need to do spend some time doing this if you have plenty of apps installed. We suggest that you begin with the most recent ones you added.
- It’s important that you only uninstall a single app at a time. After removing an app, restart the phone to normal mode and check for the problem again.
Keep in mind that there’s no shortcut to knowing which app is bad or buggy. Just be patient and keep repeating the cycle above if the problem returns after removing one app.
Try to Boot into Recovery
In case you don’t know what is recovery, the first thing the bootloader rings up is the recovery. Recovery Mode refers to a special bootable partition, which contains a recovery application installed in it. And you can fix some problems with your phone. Follow the steps to boot into recovery mode:
- Press and hold the power/Bixby and volume down button simultaneously until the Android logo pops up.
- When the green Android logo displays, release both buttons.
- The Recovery screen menu will now appear
If your phone boots to Recovery Mode successfully, make sure to try wipe cache partition first. If that won’t work, then you can factory reset the phone by selecting Wipe data/factory reset.
Wipe Cache Partition
- The Recovery screen menu will now appear
- Use the Volume button to go to Wipe Cache Partition then press the Power button to confirm the selection.
- Wait until your device wipes out all cache or temporary data from the system partition.
- Press the Power button again to reboot the device.
Wipe data/factory reset
- The Recovery screen menu will now appear
- Use the Volume Down button until you are highlighting ‘Wipe data/factory reset.’
- Press the Power button to select ‘Wipe data/factory reset.’
- Use Volume Down to highlight Yes.
- Press the Power button to confirm the action to clear your phone data.
Visit the Service Centre
Although it’s rare, some cases of the issues on Samsung Galaxy devices may have bad hardware as the origin. If a factory reset won’t help in fixing your issue, visit your local Samsung store or Service Center so a qualified Samsung technician can examine the hardware. If needed, they may send it in for repair or replacement.
Do you own a Galaxy Device, or any Android device and need these types of simple tutorials? Then stay tunned to GetDroidTips’ Android Tips & Tricks column because many simple tutorials for Galaxy are coming soon.
If you have any queries regarding this, the comment section always available for you.
