Download Samsung Galaxy M05 SM-M055F Firmware Flash File

The Samsung Galaxy M05 is a budget-friendly phone, offering decent performance and battery life for everyday use. It’s a practical choice for those seeking affordability and essential smartphone features. On this page, we have shared the download link and guide to installing the Samsung Galaxy M05 binary 1 U1 firmware flash file using the Samsung Flash Tool (Also known as Odin Flash Tool). Here, you will find all stock firmware zip files for all the supported regions with Samsung Galaxy M05.

In case you’re looking to reset your device to its factory firmware, you’ve come to the right place. With the help of this guide, you can resolve any software-related problems you might be facing, such as hard or soft bricking, WiFi or Bluetooth connectivity issues, lag, stutter, and even downgrade your device whenever needed.

Samsung Galaxy M05 Device Overview:

The Samsung Galaxy M05, released in September 2024, is a budget smartphone with a solid build and reliable features. It has a slightly larger and bulkier design compared to other models, measuring 168.8 x 78.2 x 8.8 mm and weighing 195 g. The phone has a 6.7-inch PLS LCD display with a resolution of 720 x 1600 pixels, offering a decent viewing experience. Powered by the MediaTek Helio G85 chipset, the Galaxy M05 runs on Android 14 with One UI Core 6.0, ensuring a smooth interface and up to two major Android upgrades. It comes with 64GB of internal storage and 4GB RAM, with a dedicated microSDXC slot for expandable storage.

The camera setup includes a dual rear camera system with a 50 MP wide lens and a 2 MP depth sensor, capable of recording 1080p videos at 30/60fps, while the 8 MP front camera handles selfies and video calls. Additional features include a 5000 mAh battery with 25W fast charging, ensuring long-lasting battery life, along with dual SIM support, a 3.5mm headphone jack, and USB Type-C 2.0 connectivity.

However, the phone lacks NFC and some advanced sensors like a fingerprint scanner. Overall, the Galaxy M05 provides a solid performance for budget-conscious users, balancing essential features with affordable pricing.

Samsung Galaxy M05 Flash Files:

Steps to Install Firmware File on Galaxy A06

Before we proceed with the steps to install the Stock Firmware on your Samsung Galaxy M05, let’s take a look at the prerequisites.

Pre-Requirements: 

• This Guide is for Samsung Galaxy M05
• You need a Windows PC/Laptop and a USB cable to flash the firmware.
• Charge your device with a minimum of 50% battery backup.
• You have to download the latest Samsung USB Drivers and install them on your PC.
• Make sure that you have ODIN Software installed on your PC.
• Take a backup of your device (No Root) before doing anything.

Now, let’s take a look at the Steps to flash the firmware file on Samsung Galaxy M05.

Instructions to Install:

1. Download the Samsung Galaxy M05 flash file
2. Extract the contents of the firmware flash file zip.
3. Launch the ODIN application
4. Load the firmware files in their appropriate section
5. Once you have loaded, connect your phone to the computer (make sure to boot your device into download mode)
6. Notice that the CO port will light up on Odin once you connect your phone.
7. Click the Start button to install the firmware on your Samsung device.
8. That’s it! You will see a PASS message once the installation is complete.

Follow Complete Guidelines | Video Tutorial

We hope that this guide will be helpful to you. If you’re facing any issues, feel free to ask in the comments below.