Download Samsung Galaxy A55 5G Firmware Flash File

On this page, we have shared the download link and guide to installing the Samsung Galaxy A55 5G binary 1 U1 firmware flash file using the Samsung Flash Tool (Also known as Odin Flash Tool). Here, you will find all stock firmware zip files for all the supported regions with Samsung Galaxy A55.

In case you’re looking to reset your device to its factory firmware, you’ve come to the right place. With the help of this guide, you can resolve any software-related problems you might be facing, such as hard or soft bricking, WiFi or Bluetooth connectivity issues, lag, stutter, and even downgrade your device whenever needed.

Samsung Galaxy A55 and A35 Device Overview:

Samsung has launched two new smartphones, the Galaxy A55 5G and Galaxy A35 5G, with advanced features for an enhanced user experience. These devices come with Android 14-based One UI 6.1, promising four generations of Android OS and One UI upgrades, along with five years of security updates. Both models have a 6.6-inch full-HD+ Super AMOLED display with a 120Hz refresh rate, capable of achieving a peak brightness of 1,000 nits. They are also protected by Gorilla Glass Victus+ and enhanced with Vision Booster technology.

The Galaxy A55 is expected to be powered by an Exynos 1480 SoC, and will offer 8GB or 12GB RAM options. The A35, on the other hand, is likely to feature an Exynos 1380 SoC, and will be available in 6GB or 8GB RAM configurations. Both devices come with up to 256GB storage, expandable to 1TB.

Photography is a major highlight of these smartphones. The Galaxy A55 5G has a triple rear camera setup, including a 50-megapixel primary sensor, a 12-megapixel ultra-wide sensor, and a 2-megapixel tertiary sensor. The A35 5G, on the other hand, has a 50-megapixel main camera, an 8-megapixel ultra-wide sensor, and a 5-megapixel macro shooter. Both devices feature a 13-megapixel front camera for selfies.

The Galaxy A55 5G and A35 5G are designed to keep users connected with 5G and Wi-Fi connectivity, among other options. Both models come with an IP67 rating for water and dust resistance, and have powerful 5,000mAh batteries that support 25W fast charging, delivering extensive audio playback. With these impressive specifications, Samsung ensures that both handsets offer a comprehensive and advanced mobile experience.

Samsung Galaxy A55 5G Flash Files:

Steps to Install Firmware File on Galaxy A15 5G

Before we proceed with the steps to install the Stock Firmware on your Samsung Galaxy A55 5G, let’s take a look at the prerequisites.

Pre-Requirements: 

• This Guide is for Samsung Galaxy A55 5G
• You need a Windows PC/Laptop and a USB cable to flash the firmware.
• Charge your device with a minimum of 50% battery backup.
• You have to download the latest Samsung USB Drivers and install them on your PC.
• Make sure that you have ODIN Software installed on your PC.
• Take a backup of your device (No Root) before doing anything.

Now, let’s take a look at the Steps to flash the firmware file on Samsung Galaxy A55 5G.

Instructions to Install:

1. Download the Samsung Galaxy A55 flash file
2. Extract the contents of the firmware flash file zip.
3. Launch the ODIN application
4. Load the firmware files in their appropriate section
5. Once you have loaded, connect your phone to the computer (make sure to boot your device into download mode)
6. Notice that the CO port will light up on Odin once you connect your phone.
7. Click the Start button to install the firmware on your Samsung device.
8. That’s it! You will see a PASS message once the installation is complete.

Follow Complete Guidelines | Video Tutorial

We hope that this guide will be helpful to you. If you’re facing any issues, feel free to ask in the comments below.