On this page, we have shared the download link and guide to installing the Samsung Galaxy A06 binary 1 U1 firmware flash file using the Samsung Flash Tool (Also known as Odin Flash Tool). Here, you will find all stock firmware zip files for all the supported regions with Samsung Galaxy A06.
In case you’re looking to reset your device to its factory firmware, you’ve come to the right place. With the help of this guide, you can resolve any software-related problems you might be facing, such as hard or soft bricking, WiFi or Bluetooth connectivity issues, lag, stutter, and even downgrade your device whenever needed.
Samsung Galaxy A06 Device Overview:
The Samsung Galaxy A06, released in August 2024, offers a sleek design with a glass front, plastic back, and a lightweight build at 189g. It features a 6.7-inch PLS LCD display with a resolution of 720 x 1600 pixels, providing an adequate viewing experience. Powered by the MediaTek Helio G85 chipset, the phone runs Android 14 and is capable of handling everyday tasks smoothly with its octa-core processor. Memory options include 64GB/4GB RAM, 128GB/4GB RAM, and 128GB/6GB RAM, with a microSDXC slot for expandable storage. The phone also includes a 5000 mAh battery with 25W fast charging, ensuring long battery life and quick recharges.
The camera setup consists of a dual rear camera system with a 50 MP wide lens and a 2 MP depth sensor, delivering clear photos and videos at up to 1080p. The 8 MP front camera handles basic selfies and video calls.
Additional features like a side-mounted fingerprint sensor, dual SIM support, a 3.5mm headphone jack, and FM radio enhance its usability. However, it lacks NFC, which might limit some payment functionalities. Overall, the Galaxy A06 is a well-rounded device, suitable for budget-conscious users seeking reliable performance and decent camera capabilities.
Samsung Galaxy A06 Flash Files:
Flash File Name: SM-A065F_A065FXXS2AXJ2_14.0_file.zip
Build Number: A065FXXS2AXJ2
Security Patch: October 2024
Version: Binary 1 U1,
Model: SM-A065F
Android Version: 14.0 |
Download |
Flash File Name: SM-A065M_A065MUBU1AXG8_14.0_file.zip
Build Number: A065MUBU1AXG8
Security Patch: July 2024
Version: Binary 1 U1,
Model: SM-A065M
Android Version: 14.0 |
Download |
Steps to Install Firmware File on Galaxy A06
Before we proceed with the steps to install the Stock Firmware on your Samsung Galaxy A06, let’s take a look at the prerequisites.
Pre-Requirements:
- This Guide is for Samsung Galaxy A06
- You need a Windows PC/Laptop and a USB cable to flash the firmware.
- Charge your device with a minimum of 50% battery backup.
- You have to download the latest Samsung USB Drivers and install them on your PC.
- Make sure that you have ODIN Software installed on your PC.
- Take a backup of your device (No Root) before doing anything.
Now, let’s take a look at the Steps to flash the firmware file on Samsung Galaxy A06.
Instructions to Install:
Disclaimer:
We at GetDroidTips won’t be responsible for any damage/error that occurs to your handset while/after following this guide or flashing any file. Proceed at your own risk.
- Download the Samsung Galaxy A06 flash file
- Extract the contents of the firmware flash file zip.
- Launch the ODIN application
- Load the firmware files in their appropriate section
- Once you have loaded, connect your phone to the computer (make sure to boot your device into download mode)
- Notice that the CO port will light up on Odin once you connect your phone.
- Click the Start button to install the firmware on your Samsung device.
- That’s it! You will see a PASS message once the installation is complete.
Follow Complete Guidelines | Video Tutorial
We hope that this guide will be helpful to you. If you’re facing any issues, feel free to ask in the comments below.
