Fix: Tineco Floor One S3 Not Charging Issue

Why is My Tineco Vacuum Facing Charging Problem

So, many users are reporting that their vacuum cleaner is not charging. And, there are a lot of reasons for the same. Therefore, we are listing some of them below so that it will be easy to analyze them.

• Battery Problem
• Battery Charging Port Not Working
• Cable Connections
• Power Supply Issue

So, these are some reasons through which you can face this issue. Now, let’s check how you can fix it.

Steps To Fix Tineco Vacuum Cleaner Charging Problem

We are here with the methods through which you can easily fix this issue of not charging. Therefore, make sure you follow these steps correctly to fix them.

Power Outlet & Supply

So, the first thing that you should do is to check whether the power supply is accurate to charge the Vacuum Cleaner or not. If it is not, then try fixing it. As you have to pass the required amount of electricity to charge the vacuum cleaner. You can also check the voltage by using any electrical stabilizers.

Also, make sure that your Power Outlet is working properly, you can try charging any other devices to ensure that the power outlet is fine.

Battery Cable Connections

The next step which you should do is to check the wire cables of the charger whether it is in working condition or not. If it is bent, or kinked then try fixing it. Also, ensure that the wire cable is not damaged. If it is damaged then you have to replace it.

Ports

After doing the assessment of the Battery Cable, try checking the ports of the USB. Check whether the USB ports are fine and its pin is not damaged. Also, clean if it has any dust. And, while connecting, check that the ports are connected properly.

Battery Should Be Installed Properly

Check whether the Battery that is installed on the Vacuum Cleaner is correctly placed or not. Try fixing it, if it is not correctly placed. After doing this, check whether the vacuum cleaner is charging or not.

Battery Issue

Make sure that the battery is in proper condition and it is not damaged and good for use. If it is damaged and there is any other fault in it, then you have to replace it with a new one.

Contact Customer Support

After doing all steps, and if the charging issue is still there, then you have to contact customer support. You have to visit the service center for the proper assessment of the battery and hardware to ensure what part is damaged and get it fixed. So, make sure that you have followed all the steps carefully and implemented them properly.

Conclusion

So, in this guide, we have tried to explain the problem through which the issue of not charging Tineco Floor One S3 can happen. We have also discussed the various methods through which the issue can be resolved. Therefore, read the guide properly and try to implement the steps carefully. And, I hope that the above-mentioned steps are clear to you. So, try to resolve the issue by following them. If you have fixed the issue by any other method, then do share it with us in the comment section.