- Tap the X button on your PlayStation 5 DualSense controller on the Power menu icon.
- Choose the third option Restart PS5, and confirm using the controller to reboot it.
2. Power Cycle the PS5 Console
If all of the console cables are working fine, then make sure to perform a power cycle method on your PS5 console by following the steps below:
- Fully switch off the PS5 console by holding the Power button for a few seconds.
- Next, wait for the LED indicator to stop flashing > Remove the power cable from the console.
- You’ll have to wait for another 20 minutes > Reconnect the power cable and turn on the console.
3. Boot PS5 in Safe Mode
Safe Mode is one of the recovery or accessibility modes on the PlayStation console to debug problematic issues or install programs easily. You can follow the steps below to start your PS5 console in Safe Mode:
- Turn Off your PS5 console by holding the Power button on the console for three seconds.
- The power indicator will blink for a few moments and then turn off.
- Now, make sure to press and hold the Power button again.
- Release the Power button once you hear the second beep sound, which will be heard after seven seconds of the first beep sound.
- Once done, connect the controller with the USB cable > Press the PS button on the controller.
You can restart the console if you want to go back to normal mode or exit the safe mode.
4. Try Changing the 4K Video Transfer Rate
It’s also worth changing the 4K video transfer rate on the PS5 console to completely reduce the screen flickering or tearing issue. To do this:
- Go to the Settings menu on your PS5 > Choose Screen and Video.
- Select Video Output from the left pane.
- Now, set your 4K Video Transfer Rate to -1 > Restart your console to apply changes.
If in case, the issue is still bothering you, then you can try changing the transfer rate to the -2 value and rebooting the console.
5. Adjust Screen and Video Settings on PS5
Multiple PS5 users have found this method useful by tweaking the display resolution, disabling HDCP and HDR, changing RGB settings, etc. Additionally, if your TV or Monitor supports HDR mode, try turning it off.
Disable HDR:
- Go to your PS5 Settings > Choose Screen and Video.
- Select Video Output from the left pane.
- Change the HDR option to Off.
Disable HDCP:
- Go to your PS5 Settings > Go to System.
- Choose HDMI from the left pane.
- Turn Off the Enable HDCP option.
Change RGB Settings:
- Go to the Settings menu from the PS5 Home screen.
- Head over to Screen and Video > Select Video Output.
- Select the RGB Range option at the bottom.
- Now, select Limited or Full.
Change Screen Resolution:
- Go to Settings on the console > Select Screen and Video.
- Select Video Output from the left pane.
- Try changing or lowering the screen resolution as per your preference.
6. Check for Faulty HDMI Cable
Check for the faulty HDMI cable on the PS5 console because connectivity or the video transfer rate issue with the HDMI cable may trouble you a lot. An incompatible HDMI cable from a cheap local brand might also conflict with the proper display connectivity. Try using another HDMI cable to check for the issue.
7. Update PS5 Firmware
You should also check for the PlayStation 5 system update because an outdated firmware version can trouble you a lot in terms of the performance and program running. If an update is available, make sure to install the same by following the steps below.
- Ensure that your console is connected to the internet.
- Go to Settings on the PS5 home screen > Select System.
- Choose System Software > Select System Software Update and Settings.
- Select Update System Software > If an update is available, the PS5 console will automatically install it.
- Once done, your console system may reboot automatically to apply changes.
8. Check for Monitor or TV Firmware Update
If you haven’t updated your TV or Monitor firmware for a while, the chances are high that your display device firmware becomes outdated enough to cause multiple conflicts. Though monitor or TV devices don’t receive frequent updates, some specific models or gaming series may be exceptional. Most popular manufacturers do offer periodic software updates and bug fixes on their eligible TVs and monitors. To check for the same:
- Head over to your TV/Monitor’s Settings menu. [Some devices do have Help or a dedicated Software Update option]
- Find out the About or Software Update.
- Now, select it to check for the available updates.
- If there is an update available, make sure to follow the on-screen instructions to complete the update.
- Installing the same may take some time, and your TV/Monitor will reboot automatically.
9. Check the Final Fantasy 16 Update
An outdated game version can always trouble you more than anything else because it might have some bugs or stability issues. So, it’s always recommended to check for the latest update and install the same to get stability, gaming performance, or new features. To do so:
- Go to the Library section on your PS5 > Choose Final Fantasy 16 game.
- Press the Options button > Select Check for Update.
- If there is an update available, make sure to install the update.
- Once done, reboot the console to apply changes.
10. Clear Final Fantasy 16 Game Data
Issues with the corrupted game data or temporary cache data can trouble you with the game launching and the screen flickering. It’s better to clear out the game data on the PS5 console by following the steps below to cross-check the issue.
- Go to Settings on the PS5 console > Select Application Saved Data Management.
- Choose System Storage, Online Storage, or USB Storage > Select Delete.
- Select Final Fantasy 16 game > Tickmark the files you want to delete or Select All.
- Choose Delete > Select OK to confirm it.
- Once done, reboot your PS5 console to apply changes.
11. Rebuild Database (PS5)
Sometimes rebuilding the console database can also quickly fix the issue related to the system. You can follow the steps below to do so:
- Power Off your PS5 console and unplug the power cable from the console.
- Ensure to wait for around 2-3 minutes > Plug in the power cable.
- Turn On the console and then Clear the Cached Data automatically.
Check whether the problem has been fixed or not. If not, you can follow the next steps below.
- Press and hold the Power button on the PlayStation 5 console until you hear 2 beeps. [The second beep will sound after seven seconds]
- The console will boot in Safe Mode > Connect the controller to the USB with the console.
- Press the PS Button on the controller > Select Rebuild Database and confirm the task.
- It may also take some time, depending on the hard drive data size. So, please wait for it.
- Once done, reboot the console.
12. Don’t Put in Rest Mode
By default, the PS5 console system may use the Rest Mode after the inactivity for some time to save power. It’s also considered the sleep mode. Ensure not to keep your PlayStation console in the rest mode because it may cause issues with the game launching or screen conflicts. To do so:
- Go to the PS5 Settings menu > Open the Power Saving option.
- Select Set Time Until PS5 Enter Rest Mode.
- Set to Don’t Put in Rest Mode > Restart the console to apply changes.
If none of the methods worked for you, contact PlayStation Support for further assistance. You should create a support ticket and provide the required information to investigate the problem properly.
That’s it, guys. We assume this guide was helpful to you. For further queries, you can comment below.
