Download Samsung A14 5G SM-A146B, A146M Firmware Flash File

The Samsung Galaxy A14 5G boasts impressive hardware, with its Exynos 1330 SoC and 8GB of RAM delivering fast and smooth performance. It runs on the latest Android 13-based One UI 5.0, offering an intuitive and user-friendly interface. The device also features a high-quality camera system, including a 50-megapixel main sensor, a 2-megapixel macro lens, and a 2-megapixel depth sensor.

On this page, we have shared the download link and guide to install the Samsung SM-A146B, A146M (Galaxy A14 5G) binary 1 U1 firmware flash file using the Samsung Flash Tool (Also known as Odin Flash Tool). Here, you will find all stock firmware zip files for all the supported regions with Samsung SM-A146B, A146M.

If you want to restore the device to factory firmware, this guide is for you. Using this guide, you can fix software-related issues such as hard brick, soft brick, WiFi, or Bluetooth, fix lag or stutter, or even downgrade the device anytime.

Samsung Galaxy A14 5G SM-A146B, A146M Flash Files:

Steps to Install Firmware File on Galaxy A14 5G SM-A146B, A146M

Before we get straight to the steps to Install Stock Firmware on your Samsung Galaxy A14 5G, let us look at the pre-requirements first.

Pre-Requirements: 

• This Guide is for Samsung Galaxy A14 5G SM-A146B, A146M
• You need a Windows PC/Laptop and a USB cable to flash the firmware.
• Charge your device with a minimum of 50% battery backup.
• You have to download the latest Samsung USB Drivers and install them on your PC.
• Make sure that you have ODIN Software installed on your PC.
• Take a backup of your device (No Root) before doing anything.

Now, let’s take a look at the Steps to flash the firmware file on Samsung Galaxy A14 5G.

Instructions to Install:

1. Download the Samsung SM-A146B, A146M flash file
2. Extract the contents of the firmware flash file zip.
3. Launch the ODIN application
4. Load the firmware files in their appropriate section
5. Once you have loaded, now connect your phone to the computer (make sure to boot your device into download mode)
6. Notice that the CO port will light up on Odin once you connect your phone.
7. Click the Start button to install the firmware on your Samsung device.
8. That’s it! You will see a PASS message once the installation is complete.

Follow Complete Guidelines

Check out our full-depth video guide as well.

We hope that this guide will be helpful to you. If in case, you’re facing any issues, feel free to ask in the comments below.