Now that you have downloaded the rollback package from the above section, just create a complete device backup before proceeding with the below-mentioned steps. This is because the installation steps require a wipe of the data. Once you have done so, here are is everything you need to be aware of regarding the downgrade of Moto G Stylus 2021 from Android 11 to Android 10.
Disclaimer:
GetDroidTips will not be held responsible for any kind of hardware or software damage to your device by following this guide. Proceed at your own risk
Firmware Installation Guide:
Check out the firmware flashing guide below for the Moto G Stylus 2021 XT2115-3. First, make sure to install or extract the adb and fastboot tool on your PC. Now enter the bootloader on your device.

Step 1. Bootloader Mode
Enter bootloader mode on your phone. To boot first, turn your phone off. Once your device is turned off completely, press and hold the volume down, and turn it on. You should see the bootloader screen.
Step 2. Connect Your Device to PC:
After booting your Moto G Stylus 2021 into bootloader mode, now connect it to the PC using the USB Cable.
Step 3. Download Stock ROM/Firmware:
To get the full ROM, you can use the LMSA or Rescue and Smart Assistant Tool. Download the zip file and copy it to somewhere on your PC. LMSA tool will unzip the file and will remove the zip file you downloaded.

You can also download the full stock ROM from the above download flash file section on this guide.
Step 4. Flashing Guide:
- The next step is to open the command window and go to the adb folder

- Enter the following command to flash the firmware
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash vbmeta vbmeta.img
fastboot flash radio radio.img
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash recovery recovery.img
fastboot flash super super.img_sparsechunk.0
fastboot flash super super.img_sparsechunk.1
fastboot flash super super.img_sparsechunk.2
fastboot flash super super.img_sparsechunk.3
fastboot flash super super.img_sparsechunk.4
fastboot flash super super.img_sparsechunk.5
fastboot flash super super.img_sparsechunk.6
fastboot flash super super.img_sparsechunk.7
fastboot flash super super.img_sparsechunk.8
fastboot flash super super.img_sparsechunk.9
fastboot flash super super.img_sparsechunk.10
fastboot flash super super.img_sparsechunk.11
fastboot flash super super.img_sparsechunk.12
fastboot flash super super.img_sparsechunk.13
fastboot flash super super.img_sparsechunk.14
fastboot flash super super.img_sparsechunk.15
fastboot flash super super.img_sparsechunk.16
- Toggle back to bootloader. Do the following:
fastboot reboot bootloader
fastboot erase ddr
fastboot erase userdata (Optional except you want to wipe)
fastboot reboot
- Now your device will reboot into bootloader with the firmware you installed.
So this was all from this guide on how to downgrade or rollback from Android 11 to Android 10 stable build on your Moto G Stylus 2021 devices. The first boot after the rollback could up some time, this is completely normal. Since a device reset has been taken place as well, you might have to set it up from scratch. Rounding up, here are some iPhone Tips and Tricks, PC tips and tricks, and Android Tips and Tricks that deserve your attention too.