Common Problems in Techno Spark 6 Go and Solutions

These issues can simply annoy you in case you don’t pay immediate attention to fix them. Also, they can transform themselves into complex ones due to the same reason. Thus, simply follow this guide whenever you experience them. Make sure you do exactly what is listed in this post. Molding the solutions can bring an additional problem and this is something for which getdroidtips cannot be blamed.

Connectivity Problems

Bluetooth connectivity problems

Solutions

In most of the cases, this happens due to a weak Bluetooth connection. Keep the devices as close as possible
Verify if the data you are receiving or sending is supported by your device or the other. If not, the same can be a reason to this problem
Clearing the cache data of the phone can probably eliminate this problem. Try it once
Open the Bluetooth settings on your device and delete the device you paired last. Now close the settings and try connecting one more time
Do check if the actual problem is lying in the other device. Take action accordingly
Make sure the phone Bluetooth is not manually disabled. The same can be a reason you are facing the glitch
Check if both the phones are paired correctly to each other. Improper pairing can cause the issue
Sometimes it’s nothing but running your Techno Spark 6 Go in the power saving mode that disabled the Bluetooth
Make sure both the devices support the Bluetooth version installed on the other
The reason you are facing this issue might be the hidden visibility of the Bluetooth connection
Check and make sure any security concern in any of the devices is not the actual trouble creator
Any kind of radiation around your Techno Spark 6 Go can stop the Bluetooth to run and perform its task smoothly. Check
You might be sending a lot of data through Bluetooth. Diving the same into smaller segments can solve the problem
Make sure the system storage space is not running out. The same can be a reason to the problem
Perform a general restart to the device. Check the status of the problem post doing so

Wi-Fi/Internet connectivity problems

Solutions

Check if the services have been suspended or temporarily stopped on your internet connection. Multiple reasons can be there for the same. One example is downloading the data beyond the defined limit on your connection
Check if network security is disabled. You can face this problem because of the very same reason
It’s nothing but an issue in the browser you are using to access the internet which is causing this problem. Check and take the action required
Placing the router at a central location always assure the problem is not caused due to a limited connectivity
The reason you are facing this problem is not entering the correct authentication details of the network in the phone
Check and make sure the router has been configured properly in the phone
This problem might be due to opening a web address that is barred or restricted by the internet service provider
Make sure the IP mismatch of your device on the network is not responsible for this fault
You simply need to make it sure the problem is not there just because your phone is having something wrong with the Wi-Fi antenna
Check if the LAN settings are customized by you. The same can cause this problem
Check if the actual fault is there just because the phone is having a hardware issue with the same
Do check if your Techno Spark 6 Go is having an app installed on the same which is accessing the Wi-Fi feature
Check if there are some additional restrictions imposed on the network you are trying to connect your device with
This problem might be due to a wrong cable connection on the router. Check the same

Mobile data not working

Solutions

Your data pack might have expired. Check the same and make sure it is not the reason to this problem
This might be happening due to crossing your daily bandwidth limit usage. Check if this is the case
Make sure the actual problem is not with the phone SIM card. Refer to the solutions listed under the headline “SIM/Network Problems” in this post
Make sure if the internet services are facing an obstacle on your phone due to any of the possible reason
This can happen in some cases when the phone is updating the installed apps or is downloading the OS updates. Check if this is the reason
Simply make sure the actual fault is not caused just because the storage space is not available in the phone. This can happen in certain cases
A problem with the service provider or with the network can be a reason you have to face this fault in your phone
Make sure you are not confusing this problem with the slow internet speed
Check if the problem is caused by a poor signal strength on your Techno Spark 6 Go
Reset the network setting to the recommended mode in case you customize them. This can solve the problem for sure
Simply restart the phone and check if this helps you to fix the issue
Turning the roaming services OFF can be a reason to this problem on your device
Check if the network mode selection on the phone is wrong. You might have selected a 2G/3G network in the same when you are using a 4G SIM
Clear the cache partition of the device and check if this solves the problem on your device

GPS Problems

Solutions

Check if the internet connectivity on the device is poor and the same is causing this problem
Make sure the actual problem is not in the phone GPS sensor. Check and get it repaired if you find the same
The problem could be there in the GPS antenna of the device. Thus, check the same and take the action required
Toggle the phone GPS and check if this works
Sometimes running a number of apps in the phone that access the phone GPS cause this problem. Close a few and check if the problem is solved
Check if the phone location services are ON. This is required for the proper working and functionality of phone GPS
Enabling power saving mode on your Techno Spark 6 Go can be the reason to this problem
Make sure the GPS problem in the device is not related to the failure of any hardware component
Check if any important OS update is spending and install the same. This can solve the GPS-related common problems in Techno Spark 6 Go
Select high accuracy mode in the location services and restart your device. This may solve the problem
Check if this problem can be solved by updating the Google maps
Recalibrate the GPS on the device using the compass app and check if the problem is eliminated
The phone GPS might be disabled or turned OFF manually. Check and turn it ON if so
Refreshing the GPS data on your device can solve this problem. Check if this works
If nothing work, perform a factory restart by saving the phone data first and check if the problem is gone

SIM/Network Problems

Solutions

This problem can be fixed with a general restart to the phone. Check if this works
The actual problem could be there just because the SIM card has not been inserted in the phone accurately. Check
One of the reasons to the common problems in Techno Spark 6 Go is nothing but restricting the SIM card access with a pin or a password
This problem can be fixed by selecting the home network manually in the network settings
Check and make sure the roaming services are activated on your SIM card. They are required while you are traveling
There are chances that the fault is there in the SIM slot. Check the same properly
Sometimes the users have to face this problem just because the network signal duplexer on the phone is unable to perform its task
The reason you are facing this problem might be due to unlocking the phone bootloader. This invites other updates than the ones which are meant for your device
Check if the variant you have purchased is compatible with the SIM card frequency
Make sure to come out of the basement as limited signal strength over there is often confused with this problem
Do check and make sure the fault is not caused just because your smartphone is running in the airplane mode
Check if this problem is there just because the SIM card is physically damaged
In some cases, the users have to face this problem just because the SIM card is not having 4G services activated on the same
Check if you are in a restricted area where the network signals are barred

Screen not working properly

Solutions

This is a problem that can be fixed simply by cleaning the screen in several cases. Actually, there are oil, sweat, and grease particles that interrupt the screen functionality, as well as the performance
Sometimes overcharging your device is the reason the screen fails to operate reliably
Delete the last installed application in your phone. Also, disable the third-party app installation in your device. Check if the problem is gone
The problem could be there just because the sensors on the device screen are not performing their actual task
This problem can be fixed with a forced restart to your Techno Spark 6 Go
The reason you are facing this problem is nothing but turning ON the screen sharing option. Check and turn it OFF. This may solve the problem
Check if you haven’t pasted the transparent screen guard properly on the same
The problem could be there just because the storage space in your Techno Spark 6 Go is full. Erase some data
Make sure the problem is not caused because of a software bug in the same. Check it properly
This problem could be there just because of a phone virus. Simply check and delete the same
Make sure the phone you are using is not having something wrong with the default screen driver
This problem could be there just because your hands are wet. Clean them and operate the screen once more
The reason to this problem is nothing but using a charger with higher output power. Check

Poor Camera Quality

Solutions

Capturing the images from the wrong angle could be the reason you have to face this issue
Simply make sure the problem is not caused just because your smartphone is having a fault in the camera app you are using. It would be good to stay with the default app than using any other
Check if a basic restart to your Techno Spark 6 Go helps you to fix the problem
Simply make sure the problem is not caused just because your smartphone is running in the power-saving mode
Check and make sure an OS bug is not the actual trouble creator.
Open the camera settings on your device. Check if you have selected a shooting mode that is not relevant to the nearby visibility conditions
Keep the phone flashlight ON wherever required
Check and make sure the actual reason to this problem is not associated with a hardware failure
Simply make sure the problem is not there just because your device is having something wrong with the camera lens
Check if cleaning the lens fix this problem
Do check and make sure the burst mode image capturing is disabled. The same is one of the major reasons to the poor camera quality
This problem can be solved easily by using the image stabilization option
Check if the HD mode is turned ON while capturing the images
It’s nothing but the camera zoom feature that you are using which is actually causing the trouble
If this problem declare its presence during a video call, the poor network signal strength or the low connectivity of your internet connection can be blamed for this

Slow Performance

Solutions

The smartphone might be having a virus in the same which is causing the actual trouble
Check and make sure all the apps installed in your device are running in the latest versions released. If not, simply update them
Perform a basic restart and check if the problem is gone
The common problems in Techno Spark 6 Go which are related to the slow performance generally declare their presence when you run the phone in the safe mode
Check if this problem is there just because the phone recommended settings are changed to custom
Check if the phone is running out of storage space. This can automatically stop various features and apps
The reason you are facing this problem is nothing but faulty RAM in the device
Close all the apps running in the background and perform a basic reboot. Check if this solves the problem
Delete the unused apps, data, and files stored in your device. Check if this helps you to fix the problem
Simply make sure the actual problem is not caused just because your device is having a virus in the same
The slow performance of your phone could be due to a weak internet connection. Check and take the suitable action
One of the recently installed third-party themes on your phone can be the reason to this problem. Delete it and check if the performance improves
Perform a hardware reset and check if this solves the problem

Overheating Problems

Solutions

Check if you are using a third-party charger to charge your device. This often causes overheating problems
Make sure the power bank if you own the same and use it to charge your device is actually compatible with the same
The reason to this problem is nothing but the installation of games in the phone which are not supported by it
Check and make sure the actual problem is not caused just because your Techno Spark 6 Go is having something wrong with the ventilation system
Check if a blocked app in your device is causing the actual trouble
Simply make sure the problem is not caused just because your smartphone is running in the power saving mode all the time
Overcharging your device is one of the major reasons to this problem. Check and take the action required
Simply make sure the actual fault is not associated with the data stored in the device
Make sure an OS bug in your device is causing the actual culprit. Download the latest updates and install them. This will fix the issue
The overheating of any smartphone is caused when the battery is not in a healthy condition. Check the same
A general restart may fix this problem. Try the same
Sometimes it’s nothing but the general factors related to the environment around you which causes the overheating problem in a smartphone
Check and make sure the actual trouble is not caused just because there are some streaming apps installed in your phone

Apps not working properly

Solutions

You can fix this problem simply by deleting the apps from your phone and installing them again. Try
Check if the phone is infected with a virus and the actual trouble is caused by the same
There are certain chances that the Operating System on your device is having something wrong. If multiple apps are causing the problem, the same can be a reason to the problem
Do check and make sure the problem is not caused just because your phone is having a problem in the RAM
Check if the apps installed in the phone are outdated. This can be a key reason to the problem
You always need to make sure that the apps have permissions given to them to access your Techno Spark 6 Go features and data
The reason you are facing this problem is nothing but running the phone in the safe mode
Check if the actual problem is there just because your smartphone is having something wrong with the app manager
This problem could be there just because your phone features are manually disabled
The reason you are facing this problem is nothing but installing the apps from other sources than the official Play Store
Check and make sure the apps are not installed in third-party storage space. The same can be a reason you are facing the issue
Perform a general restart and check if this helps you
Delete the cache data of the installed apps one after one and check if the problem is gone
In several cases, it’s nothing but the problem in any of the hardware components of your device which causes the problem

Earpiece Sounds Robotic

Solutions

Check if this problem is there because you have installed a third-party music app in your phone which is not supported
The robotic sound in the earpiece can be among the common problems in Techno Spark 6 Go when you run it in the safe mode
Make sure the phone sound card is in proper working condition and is not contributing for this trouble
Improperly connecting or pairing the earpiece with the phone can be a reason you are facing the problem. Check the same
Simply make sure the problem is not caused just because your smartphone is having something wrong with the default sound drivers
Playing music that is of very low quality can be the reason you are facing the trouble
Sometimes it’s nothing but the liquid damage caused to the earpiece speakers which gives robotic sound
This problem can arrive during a voice call because of fluctuating network signal strength
The problem might be there just because your phone is having something wrong with the OS. Check
Make sure the problem is not caused because of signal blockage or attenuation in the earpiece
Sometimes it’s nothing but a compatibility issue that causes this problem
Check if the earpiece is giving the robotic sound just because your phone is suffering from a hardware problem
Don’t customize the sound settings of your device. The same is one of the reasons to the problem

Poor Battery Life

Solutions

The phone GPS might be turned ON. Check and turn it OFF if the same is not required
Make sure the problem is not caused just because there are some of the power-hungry apps installed in the phone
Sometimes it’s nothing but running the phone in the power saving mode all the time that truly affects its battery performance
In case any app is installed in the phone for boosting the battery backup, simply delete the same
Make sure your phone always runs in the general settings and not in custom. The same can have an impact on the battery backup
Do check and make sure the problem is not caused due to a battery faulty in your Techno Spark 6 Go
You can fix this problem by reducing the screen brightness if it is too high
A lot of apps are there which send unwanted notifications that affect the battery performance of the device. Check if this is causing the problem
Make sure your Techno Spark 6 Go is not having something wrong with the installed apps
There are chances that the problem is there just because a lot of apps are running in the background. Check and close them
Sometimes it’s nothing but installing games in the phone by customizing their settings which affect the battery performance
This problem can be solved by performing a software reset. Check if this works
Delete the data stored in the phone a long ago which is not having any use now. The same can help you to fix the issue for sure
Do check if your phone is having something wrong with the OS

Slow Charging

Solutions

Turn OFF the Wi-Fi hotspot and check if this improves the charging time of your phone
The reason you are facing this problem is nothing but a softer issue in the phone
Simply check and make sure the problem is not there just because the charger you are using is faulty
There are chances that the actual problem is caused just because your phone is having a problem in the charging port
Make sure the problem is not there just because any of the pirated accessories is connected to your device
Keep the phone Bluetooth and Wi-Fi OFF while charging the same
Make sure not to download the data from the internet while you are charging your gadget
This problem can be fixed simply by restarting your device. Try the same
Delete the unused apps from your Techno Spark 6 Go and check if this can help you to fix this problem
The power source with which the phone charger is connected might be weak
Check if this problem is caused by a phone virus. Scan your device and take the action required
Avoid installing third-party apps in your phone

Techno Spark 6 Go Fingerprint Sensor Issue

Solutions

First of all, simply clean your hands. Dust or debris on the fingers can be a reason to the problem. Check and take action required
Gently clean the fingerprint scanner on the phone with a soft cloth and check if this solves the problem
This problem can sometimes declare its presence due to completely filling the storage space of the phone
The fingerprint scanner might not be working due to a bug in the Operating System. Check and take the required action.
Simply delete the saved fingerprint from your Techno Spark 6 Go and add it again. This can solve the problem
One of the reasons to the fingerprint-related common problems in Techno Spark 6 Go is nothing but putting pressure on the fingerprint scanner very softly. Put a bit more pressure on the same with your finger and check if this works
Always make sure to add more than one fingerprint
Your fingers might be wet and the same can be a reason to this problem
Always give priority to the phone updates. Installing them make sure the problem wouldn’t declare its presence
Check if there is a minor injury on your finger which might be acting as a barrier for the scanner when it try to read the information from the same
Performing a factory restart can solve this problem. If this doesn’t work, the reason to this problem might be a hardware fault in the phone.
Sometimes this problem could be there due to allowing multiple apps installed in the phone to access the fingerprint scanner on the phone. Check and take the action required

Techno Spark 6 Go Not Turning ON

Solutions

Check if the phone battery is charged. This could be due to the consumption of entire juice from the same
An issue with the third-party app can cause this problem. Thus, check all the apps before you install them in the phone and make sure they are compatible with the same
Make sure to press the power button a bit harder and check if this helps
Sometimes this problem would be due to a fault in the power button. Check and take the action required
An unknown software glitch in the device can be a reason to this problem. Check and take the action required
There are chances that the phone is getting turned but it’s the screen that is not. Check and make sure this is not the actual issue in your case
This might be happening because you restarted or turned OFF your device when it was updating
Know the exact number of seconds for which you need to press the power button. Sometimes this problem is there just because you are pressing the same for a very short span of time
Liquid damage to your Techno Spark 6 Go can be a reason to this problem. Check and take the action required
Hardware damage in your phone can be the reason to this problem. Check and get it repaired
Overheating can sometimes turn off the device automatically and you cannot turn it ON unless the inner temperature comes down the normal range
Check if the phone can be turned ON in safe mode. Press the power button with the volume up/down button for the same. If this doesn’t work, try opening it in the recovery mode

Techno Spark 6 Go Not getting charged via cable/charger

Solutions

Check if this is a problem just because the phone battery is faulty
Make sure the phone charger is in proper working condition
A loose connection between the phone and the charging cable can be a reason to this problem. Thus, make sure to connect them properly
A bad app or the one installed from a third-party source can be the reason to this problem
Don’t use a third-party charger as this can be a reason to this problem
Check if dust or debris is there in the charging port and clean it. The same can be a reason you have to face this problem in your device
In some cases, the phone gets charged but the charging percentage icon doesn’t give the correct information. This can happen due to a software bug. Check and install the latest updates if the same is pending
Sometimes the charging-related common problems in Techno Spark 6 Go are experienced when the charging socket/power source you are using to charge your widget is faulty
Check if the actual fault is with the charging cable. Check and replace the same if required
This problem could be due to the detection of moisture in your Techno Spark 6 Go. Check its level and take the required action
Remove the last application you installed and check if this helps you to deal with the problem
An issue with the phone motherboard can be the reason you have to face this problem
The pins in the phone socket might be damaged and the same is causing this problem. Check the same
Drain the phone battery completely and charge it again. Check if the problems is solved
Performing a forced restart to the phone can fix this issue. Simply try the same

Unfortunately camera has stopped

Solutions

Check the default camera driver software in the phone. Check if installing the new updates for the OS fixes this problem
Make sure you aren’t using a third-party camera application that is not compatible with your Techno Spark 6 Go
Disable the safe mode if your phone is running in the same
This problem could be there just because the phone has something wrong with any of the hardware components inside
Close the camera application if it is running in the background and open it again after 30 seconds. Check if this solves the problem
Delete the cache of the camera application and check if this helps you to deal with the problem
Do check and make sure the actual problem is not caused just because the camera lens is faulty or damage
There might be no storage space available in the phone or in the memory selected for storing the camera files and the same can cause this problem. Most of the time the camera-related common problems in Techno Spark 6 Go are because of no other reason than this

Solutions

Check if the concerned app is outdated. Updating the same from the Play Store can fix this problem.
Do check if the Google Play Service on your device is having something wrong with the same because it can affect the working of installed applications
The low storage space on your device can be a reason for this problem. check and do the needful in this regard
There are chances that the actual problem is with your account created on the app. Check
Make sure there are no recent changes in user’s policies of the concerned app
One of the reasons for the app login-related common problems in Techno Spark 6 Go is not cleaning the cache data of the concerned app. Try it and check if this solves the problem
You might be running the app in custom mode. Check this as it’s a common reason for this problem
A weak internet connection can also be the reason for this problem. Check it and do the needful
Check if there is a security concern with the app which is responsible for this problem

MicroSD card problems

Solutions

Check if the problem you are facing is just there because you haven’t inserted the card properly in the phone
Loading the microSD card with inappropriate and corrupt data or the one which is not supported by the phone can be another reason for this problem
Make sure the card you are using is actually in working condition
Do check if this problem can be solved simply by ejecting and inserting the card again in the phone
One of the reasons for the micro-SD card-related common problems in Techno Spark 6 Go is the presence of a virus in the data stored
Open settings and check if any kind of restrictions are imposed on the microSD card or the phone
Check if the card you are using is not supported by the device or if it is having a physical damage
Do check if this problem is there just because your phone can’t handle the memory card with the same storing capacity you are using
If the other methods don’t work, format the card and check if this solves the problem

Video Recording Issue

Solutions

Check if the camera lens is dirty. This can be a reason for the problem in your device
One of the reasons for the Video-recording related common problems in Techno Spark 6 Go is the low storage space available. Check and empty the same
Running the camera app in custom settings can be a reason for this problem in some cases
You need to make it sure the problem is not caused just because your Techno Spark 6 Go camera lens is physically damaged
There are certain chances that the problem is caused because of a software issue in the device. Update the OS if a new version is available and check if this fixes the problem
Turn ON airplane mode and check if videos can now be recorded. If so, simply close everything running in the background and close notifications. Restart your device after this
The problem might be there because you are using a third-party camera app your device cannot fully support. Check the same
Restore all settings to default in video recording settings and check if the problem is gone

Unable to Send or Receive Text Messages

Solutions

Make sure the contact you are sending the message to is not blocked
Check if the problem is there just because the message center number for the network operator is not correct or missing in your Techno Spark 6 Go settings
Simply clean the message app data and check if the problem is solved
Erase some older messages that are no longer required and check if this works
Restarting your device may solve this problem. Try it and check
Remove the SIM card from your device and reinsert. This may solve the problem. Try it
Check if the problem is from the network provider’s end

Unable to Make Phone Calls

Solutions

This problem might be there because the Airplane mode on your device is turned ON. Check and turn it OFF
Eject the SIM tray and reinsert after 10 seconds. This may fix the problem
Reset the network settings to default in case you recently customize them and check if this works
Phone call-related common problems in Techno Spark 6 Go are caused often when the network selection mode is set to manual mode. Switch it to automatic and check if this fixes the problem
You might have blocked the phone contact you are trying to call. Check this in the block list
Simply restart your device and check if this fixes the problem
Make sure the call barring option is not turned ON because this can be a reason for this problem
Install any pending software update and check if this helps you to fix the problem
The reason for this problem might be a lack of calling credit. Check and fill the same

WhatsApp Not working on Techno Spark 6 Go

Solutions

Check if you are violating any WhatsApp user policy
Switch to default settings in the settings and check if this works
Check if the WhatsApp storage on your Techno Spark 6 Go is completely filled. Erase some data and try again
Sometimes this problem is caused when user login on the same account through multiple gadgets. Make sure you have not logged in to your account from a PC/parallel smartphone at the same time
There are chances that you are running WhatsApp on an outdated OS. Check and take the action required
Simply switch to the latest WhatsApp version if you haven’t installed its updates for a long time
Make sure something is not wrong with your internet connection
Clear the WhatsApp cache data and check if this fixes the problem
WhatsApp-related common problems in Techno Spark 6 Go are caused in some cases when VPN is turned ON. Turn it OFF and check if the problem is gone

There are problems that cannot be fixed despite applying these solutions again and again. If this is also the case with you, there are chances that something is wrong with the hardware domain of your device. Contact official Techno support to get them fixed. Share your experience with us by posting a comment below. Thanks and keep visiting our blog for similar posts.

Common Problems in Techno Spark 6 Go and Solutions – Wi-Fi, Bluetooth, Camera, SIM, and More

Techno Spark 6 Go Specifications and Review