Download and Install Android 15 on Xiaomi Redmi Note 10 Pro

In this guide, we’ll walk you through the process of installing the Android 15 Custom ROM on the Xiaomi Redmi Note 10 Pro. If you’re eager to experience the clean, feature-packed Android 15, you’ve come to the right place. Google recently launched Android 15 for its Pixel lineup, followed by the official source code release for developers. This has led to the creation of custom ROMs based on Android 15 for Redmi Note 10 Pro, users can now enjoy an unofficial AOSP build of Android 15. Ready to transform your device with the latest Android features? Let’s get started!

Xiaomi Redmi Note 10 Pro Overview

The Redmi Note 10 Pro was announced on the 4th of March, 2021. The smartphone features a 6.67-inch AMOLED display with a resolution of 1080 x 2400 pixels and an aspect ratio of 20:9. It has a refresh rate of 120Hz and a peak brightness of 1200 nits. Under the hood, we have the Qualcomm Snapdragon 732G, which is built on an 8nm manufacturing process. This is an octa-core process consisting of two Kryo 470 Gold cores clocked at 2.3GHz and six Kryo 470 Silver cores clocked at 1.8 GHz.

We have a quad-camera setup at the rear and a single camera at the front. The quad setup consists of a 64MP primary sensor paired with an f/1.7 lens, an 8MP ultrawide sensor paired with an f/2.2 lens, a 5MP macro sensor paired with an f/.2.4 lens, and a 2MP depth sensor paired with an f/2.4 lens. At the front, we get a single 25MP sensor paired with an f/2.5 lens which is housed in a center punch hole alignment. The rear setup is capable of 4K video recording, and the front is limited to 1080p video recording.

In terms of protection, we get IP53 certification for dust and splash protection. The phone runs on Android 11 with MIUI 12 skin on top of it. In terms of storage(UFS2.2) and RAM, we have three options: 6GB RAM + 64GB ROM, 6GB RAM + 128GB ROM, and 8GB RAM + 128GB ROM. We also get a 3.5mm headphone jack and a stereo speaker setup with this smartphone. In terms of connectivity, we have Wi-Fi 802.11 a/b/g/n/ac, dual-band, Bluetooth 5.1, GPS Yes, NFC (only in selected market/region), Infrared port, and USB USB Type-C 2.0.

For sensors, we have a side-mounted fingerprint sensor, accelerometer, gyro, proximity, and compass. Powering all of it is a 5020 mAh battery capable of 33W fast charging. The smartphone is available in three color options: Onyx Gray, Glacier Blue, and Gradient Bronze. A point to note here is that the Redmi Note 10 Pro global and Indian variants are different. The global variant has all the same specs as the Indian variant except for the primary rear camera sensor, which changes to a 108MP sensor paired with an f/1.9 lens.

Android 15 and Its Features

Google has officially rolled out Android 15, packed with a wide array of new features and significant improvements. This latest version promises enhanced productivity, stronger privacy protections, and smoother overall performance. Released on September 3, Google has made the source code available through the Android Open Source Project (AOSP). While Pixel devices are the first to receive the Android 15 update, it will soon be available on select devices from brands like Honor, iQOO, Lenovo, Motorola, Nothing, OnePlus, Oppo, Realme, Samsung, Sharp, Sony, Tecno, Vivo, and Xiaomi in the upcoming months.

Android 15 introduces several innovative features, including Private Space—which allows users to keep sensitive apps separate from the rest of the phone—and Improved Audio Image Descriptions. Additionally, there are new satellite connectivity options, an Earthquake Alert System, offline maps for Wear OS, and enhanced Bluetooth capabilities. Other key updates include Partial Screen Recording, Malicious App Blocking, App Archiving, Audio Sharing, improved low-light camera performance, better battery life, enhanced theft protection, a more user-friendly taskbar, and robust fraud and scam protection. Android 15 aims to deliver a more secure, versatile, and responsive user experience.

What’s Working and Known Bugs:

Whats working?

Everything seems fine

Known issues ?

Please let me know with a proper logs

Steps To Install AOSP Android 15 on Redmi Note 10 Pro

This guide will walk you through the steps to install the AOSP Android 15 Custom ROM on the Xiaomi Redmi Note 10 Pro. If you’re looking for a clean, pure Android experience with the latest features and updates, you’ve come to the right place. Google has recently launched Android 15, and while it’s officially available for Pixel devices, the source code is also available for developers.

Before we dive into the installation guide, please ensure that you’ve met all the prerequisites mentioned below to avoid any issues during the installation process.

Pre-Requisites

Before proceeding, you are strongly advised to back up your device’s storage and all your essential files. This ensures that no data is lost in case anything goes wrong during the process. Following the steps carefully will help avoid any permanent damage or bricking of your device.

Charge Your Phone

Ensure your device has at least 50% or more battery before unlocking the bootloader or flashing the ROM to prevent any unexpected shutdowns during the process.

Download ADB and Fastboot Binaries

You can skip this part if you have already installed TWRP Recovery on your Redmi Note 10 Pro. For those who haven’t, ADB and Fastboot commands (platform-tools) are required to boot your device into bootloader mode, allowing you to perform the necessary flashing operations. ADB (Android Debug Bridge) establishes a connection between your device and computer, while Fastboot is a more advanced command-line utility for flashing and modifying Android devices.

You can download the ADB and Fastboot Binaries (Platform-Tools) here.

Download Xiaomi USB Drivers

You’ll need the appropriate USB drivers to ensure a successful connection between your Redmi Note 10 Pro and your computer. These drivers enable file transfers, flashing, and other operations between your devices.

You can download the official Xiaomi USB drivers here.

Unlock the Bootloader of Your Phone:

Unlocking the bootloader of your Xiaomi Redmi Note 10 Pro is essential before you can install any custom ROM. Make sure to follow Xiaomi’s official instructions for unlocking the bootloader. Unlocking the bootloader will wipe your device, so back up your data beforehand.

Install TWRP Recovery:

You must install TWRP Recovery on your phone to install any custom ROM on your device. After unlocking the bootloader, follow our guide to install TWRP Recovery on your Redmi Note 10 Pro.

Download Android 15 ROM:

You can download the Android 15 custom ROMs for the Xiaomi Redmi Note 10 Pro from the links below:

CrDroid OS

Development Page

Download Android 15 Gapps:

Currently, there are no specific GApps packages officially released for Android 15. However, based on community feedback, NikGApps for Android 14 seems to be a reliable alternative. You can try using the NikGApps Core package from the Android 14 version to flash onto your Android 15 custom ROM.

You can download the NikGApps Core for Android 14 from the following link: Download NikGApps Core for Android 14

This package should provide the basic Google services, including the Play Store, on your Android 15 device. Since this is a workaround, there may be some compatibility issues, but it’s worth trying until an official Android 15-compatible GApps package is available.

Make sure to flash it right after the ROM installation during the TWRP installation process, and don’t forget to check for updates to GApps periodically.

Warning!

GetDroidTips is not responsible for any issues that may happen to your device if you flash it on another device and brick it. Do it at your own risk.

Instructions To Install:

Connect your device to the PC via a USB cable. Make sure USB Debugging is enabled.
Then, go to the platform-tools folder, type CMD in the address bar, and hit Enter. This will launch the Command Prompt.
Execute the below command in the CMD window or enter recovery mode using the Volume and Power button combination to boot your device to TWRP Recovery:
```
adb reboot recovery
```
Now head to the Install section and navigate to the downloaded vendor and firmware. Perform a right swipe to flash it.TWRP Home
If you want Google Apps as well, you need to flash it at this instance. Go to Install, select the GApps ZIP file, and perform a right swipe to flash this file.
When that is done, you may reboot your device. Head over to Reboot and select System.

The first boot after installing a custom ROM may take a bit longer than usual, so don’t panic if it seems slow. After the device boots, you will need to set it up as a new device, just like when you first got it.

Conclusion

If you’re eager to try the latest Android 15 OS on your Xiaomi Redmi Note 10 Pro, flashing this custom AOSP build is the way to go. While it is unlikely that the Redmi Note 10 Pro will receive an official Android 15 update from Xiaomi, this custom ROM will give you access to most of Android 15’s features and updates. However, as with any custom ROM, you might encounter some bugs or stability issues, so it’s a good idea to report them to the relevant XDA forum.

That’s all for this guide. We hope it helped you successfully install Android 15 on your Redmi Note 10 Pro. If you have any questions or run into any issues, feel free to leave a comment below. Good luck!