Download and Install Android 15 on Realme C3

In this guide, we’ll walk you through the process of installing the Android 15 Custom ROM on the Realme C3. If you’re eager to experience the clean, feature-packed Android 15, you’ve come to the right place. Google recently launched Android 15 for its Pixel lineup, followed by the official source code release for developers. This has led to the creation of custom ROMs based on Android 15 for Realme C3, users can now enjoy an unofficial AOSP build of Android 15. Ready to transform your device with the latest Android features? Let’s get started!

Realme C3 Overview

The Realme C3 sports a 6.52-inch IPS LCD display with a resolution of HD+ i.e. it has a resolution of 720×1600 pixels and with a waterdrop notch. The display has a pixel density of 269 pixels per inch ( PPI ) and with an aspect ratio of 20:9. This display has also come with a Corning Gorilla Glass protection. Underneath the Realme C3, it sports the latest octa-core MediaTek Helio G70 chipset; this chipset has awesome capabilities. Coming to the internals of this octa-core G70 SoC, it has two Cortex-A75 cores which clock at 2GHz and to the rest it has six Cortex-A55 cores which clocks at 1.7GHz. This SoC is built on the 12nm process and this SoC is a major upgrade over the Helio P22 which was inside the Realme C2.

Further, the device pairs with 3GB and 4GB of RAM. It has either 32GB or 64GB internal storage options. This internal storage is also further expandable via a micro SD card slot up to 256GB. The device has a dedicated SIM card slot, unlike the hybrid SIM card slot which we have seen on many devices. In this type of SIM card slots, we can insert two Nano type SIM cards and at the same time a micro SD card too.

Coming to the optics department, the Realme C3 sports a dual rear camera setup. This rear camera setup packs a 12MP primary sensor with an f/1.8 aperture value and a pixel size of 1.25-micron. For assisting this sensor, there is a secondary 2 MP sensor with an f/2.4 aperture value and a pixel size of 1.75-micron. The camera on Realme C3 will offer features like Chroma Boost, slow motion video recording, HDR, and panorama selfie. To the front, the device sports a 5 MP sensor that will be used for selfies and video calling.

The Realme C3 packs a 5,000 mah battery and still has a micro USB port. We don’t know when will Realme start using USB type C port in their budget smartphones. And this battery doesn’t come with support for fast charging. The device runs on the latest Android 10 which is based on Color OS 7. Connectivity options on the Realme C3 include Wi-Fi 802.11 b/g/n, GPS, Bluetooth v5.00, USB OTG, Micro-USB, FM radio, Wi-Fi Direct, 3G, and 4G (with support for Band 40 used by some LTE networks in India) with active 4G on both SIM cards.

Android 15 and Its Features

Google has officially rolled out Android 15, packed with a wide array of new features and significant improvements. This latest version promises enhanced productivity, stronger privacy protections, and smoother overall performance. Released on September 3, Google has made the source code available through the Android Open Source Project (AOSP). While Pixel devices are the first to receive the Android 15 update, it will soon be available on select devices from brands like Honor, iQOO, Lenovo, Motorola, Nothing, OnePlus, Oppo, Realme, Samsung, Sharp, Sony, Tecno, Vivo, and Xiaomi in the upcoming months.

Android 15 introduces several innovative features, including Private Space—which allows users to keep sensitive apps separate from the rest of the phone—and Improved Audio Image Descriptions. Additionally, there are new satellite connectivity options, an Earthquake Alert System, offline maps for Wear OS, and enhanced Bluetooth capabilities. Other key updates include Partial Screen Recording, Malicious App Blocking, App Archiving, Audio Sharing, improved low-light camera performance, better battery life, enhanced theft protection, a more user-friendly taskbar, and robust fraud and scam protection. Android 15 aims to deliver a more secure, versatile, and responsive user experience.

What’s Working and Known Bugs:

Whats working?

Everything seems fine

Known issues ?

Please let me know with a proper logs

Steps To Install AOSP Android 15 on Realme C3

This guide will walk you through the steps to install the AOSP Android 15 Custom ROM on the Realme C3. If you’re looking for a clean, pure Android experience with the latest features and updates, you’ve come to the right place. Google has recently launched Android 15, and while it’s officially available for Pixel devices, the source code is also available for developers.

Before we dive into the installation guide, please ensure that you’ve met all the prerequisites mentioned below to avoid any issues during the installation process.

Pre-Requisites

Before proceeding, you are strongly advised to back up your device’s storage and all your essential files. This ensures that no data is lost in case anything goes wrong during the process. Following the steps carefully will help avoid any permanent damage or bricking of your device.

Charge Your Phone

Ensure your device has at least 50% or more battery before unlocking the bootloader or flashing the ROM to prevent any unexpected shutdowns during the process.

Download ADB and Fastboot Binaries

You can skip this part if you have already installed TWRP Recovery on your Realme C3. For those who haven’t, ADB and Fastboot commands (platform-tools) are required to boot your device into bootloader mode, allowing you to perform the necessary flashing operations. ADB (Android Debug Bridge) establishes a connection between your device and computer, while Fastboot is a more advanced command-line utility for flashing and modifying Android devices.

You can download the ADB and Fastboot Binaries (Platform-Tools) here.

Download Realme USB Drivers

You’ll need the appropriate USB drivers to ensure a successful connection between your Realme C3 and your computer. These drivers enable file transfers, flashing, and other operations between your devices.

You can download the official Realme USB drivers here.

Unlock the Bootloader of Your Phone:

Unlocking the bootloader of your Realme C3 is essential before you can install any custom ROM. Make sure to follow Realme’s official instructions for unlocking the bootloader. Unlocking the bootloader will wipe your device, so back up your data beforehand.

Install TWRP Recovery:

You must install TWRP Recovery on your phone to install any custom ROM on your device. After unlocking the bootloader, follow our guide to install TWRP Recovery on your Realme C3.

Download Android 15 ROM:

You can download the Android 15 custom ROMs for the Realme C3 from the links below:

Pixel OS	Development Page
YAAP OS	Development Page

Download Android 15 Gapps:

Currently, there are no specific GApps packages officially released for Android 15. However, based on community feedback, NikGApps for Android 14 seems to be a reliable alternative. You can try using the NikGApps Core package from the Android 14 version to flash onto your Android 15 custom ROM.

You can download the NikGApps Core for Android 14 from the following link: Download NikGApps Core for Android 14

This package should provide the basic Google services, including the Play Store, on your Android 15 device. Since this is a workaround, there may be some compatibility issues, but it’s worth trying until an official Android 15-compatible GApps package is available.

Make sure to flash it right after the ROM installation during the TWRP installation process, and don’t forget to check for updates to GApps periodically.

Warning!

GetDroidTips is not responsible for any issues that may happen to your device if you flash it on another device and brick it. Do it at your own risk.

Instructions To Install:

Connect your device to the PC via a USB cable. Make sure USB Debugging is enabled.
Then, go to the platform-tools folder, type CMD in the address bar, and hit Enter. This will launch the Command Prompt.
Execute the below command in the CMD window or enter recovery mode using the Volume and Power button combination to boot your device to TWRP Recovery:
```
adb reboot recovery
```
Now head to the Install section and navigate to the downloaded vendor and firmware. Perform a right swipe to flash it.TWRP Home
If you want Google Apps as well, you need to flash it at this instance. Go to Install, select the GApps ZIP file, and perform a right swipe to flash this file.
When that is done, you may reboot your device. Head over to Reboot and select System.

The first boot after installing a custom ROM may take a bit longer than usual, so don’t panic if it seems slow. After the device boots, you will need to set it up as a new device, just like when you first got it.

Conclusion

If you’re eager to try the latest Android 15 OS on your Realme C3, flashing this custom AOSP build is the way to go. While it is unlikely that the Realme C3 will receive an official Android 15 update from Xiaomi, this custom ROM will give you access to most of Android 15’s features and updates. However, as with any custom ROM, you might encounter some bugs or stability issues, so it’s a good idea to report them to the relevant XDA forum.

That’s all for this guide. We hope it helped you successfully install Android 15 on your Realme C3. If you have any questions or run into any issues, feel free to leave a comment below. Good luck!