Download and Install Android 15 on Xiaomi Poco F3

In this guide, we’ll walk you through the process of installing the Android 15 Custom ROM on the Xiaomi Poco F3. If you’re eager to experience the clean, feature-packed Android 15, you’ve come to the right place. Google recently launched Android 15 for its Pixel lineup, followed by the official source code release for developers. This has led to the creation of custom ROMs based on Android 15 for Poco F3, users can now enjoy an unofficial AOSP build of Android 15. Ready to transform your device with the latest Android features? Let’s get started!

Xiaomi Poco F3 Overview

The Poco F3 features a 6.67 inch AMOLED panel with a resolution of 1080 x 2400 pixels and an aspect ratio of 20:9. It has a refresh rate of 120 Hz and has support for HDR10+. The company claims a peak brightness of 1300 nits. Under the hood, we have the Qualcomm Snapdragon 870 built on a 5nm manufacturing process. It is an octa-core processor which consists of one Kryo 585 core clocked at 3.2 GHz, three Kryo 585 cores clocked at 2.42 GHz, and four Kryo 585 cores clocked at 1.8 GHz.

In terms of optics, we have a triple camera setup at the rear and a single camera at the front. The triple camera setup consists of a 48MP primary sensor paired with an f/1.8 lens, an 8MP ultrawide sensor paired with an f/2.2 lens, and a 5MP macro sensor paired with an f/2.4 lens. Coming to the front, we get a 20MP sensor paired with an f/2.5 lens. The rear camera setup can capture 4K videos at 30 fps, while the front camera is only limited to 1080p video recording. For video recording, we only have EIS(Electronic Image Stabilization) and no OIS(Optical Image stabilization) on any of the sensors.

The smartphone will come with Android 11 out of the box with MIUI 12 for Poco running on top. We will have two storage options for this device: 6GB RAM + 128GB internal storage and 8GB RAM + 256GB internal storage. In terms of communications, we have Wi-Fi 802.11 a/b/g/n/ac/6, Bluetooth 5.1, GPS, NFC, Infrared port, and USB Type-C 2.0.

For sensors, we have a side-mounted fingerprint sensor, accelerometer, gyro, proximity, color spectrum, and compass. Powering it all is a 4520 mAh battery that supports 33 fast wired charging. The company claims the smartphone goes from 0-100% in 52 min using the provided adapter and cable in the box. The smartphone is available in three color options: Arctic White, Night Black, and Deep Ocean Blue.

Android 15 and Its Features

Google has officially rolled out Android 15, packed with a wide array of new features and significant improvements. This latest version promises enhanced productivity, stronger privacy protections, and smoother overall performance. Released on September 3, Google has made the source code available through the Android Open Source Project (AOSP). While Pixel devices are the first to receive the Android 15 update, it will soon be available on select devices from brands like Honor, iQOO, Lenovo, Motorola, Nothing, OnePlus, Oppo, Realme, Samsung, Sharp, Sony, Tecno, Vivo, and Xiaomi in the upcoming months.

Android 15 introduces several innovative features, including Private Space—which allows users to keep sensitive apps separate from the rest of the phone—and Improved Audio Image Descriptions. Additionally, there are new satellite connectivity options, an Earthquake Alert System, offline maps for Wear OS, and enhanced Bluetooth capabilities. Other key updates include Partial Screen Recording, Malicious App Blocking, App Archiving, Audio Sharing, improved low-light camera performance, better battery life, enhanced theft protection, a more user-friendly taskbar, and robust fraud and scam protection. Android 15 aims to deliver a more secure, versatile, and responsive user experience.

What’s Working and Known Bugs:

Whats working?

Everything seems fine

Known issues ?

Please let me know with a proper logs

Steps To Install AOSP Android 15 on Poco F3

This guide will walk you through the steps to install the AOSP Android 15 Custom ROM on the Xiaomi Poco F3. If you’re looking for a clean, pure Android experience with the latest features and updates, you’ve come to the right place. Google has recently launched Android 15, and while it’s officially available for Pixel devices, the source code is also available for developers.

Before we dive into the installation guide, please ensure that you’ve met all the prerequisites mentioned below to avoid any issues during the installation process.

Pre-Requisites

Before proceeding, you are strongly advised to back up your device’s storage and all your essential files. This ensures that no data is lost in case anything goes wrong during the process. Following the steps carefully will help avoid any permanent damage or bricking of your device.

Charge Your Phone

Ensure your device has at least 50% or more battery before unlocking the bootloader or flashing the ROM to prevent any unexpected shutdowns during the process.

Download ADB and Fastboot Binaries

You can skip this part if you have already installed TWRP Recovery on your Poco F3. For those who haven’t, ADB and Fastboot commands (platform-tools) are required to boot your device into bootloader mode, allowing you to perform the necessary flashing operations. ADB (Android Debug Bridge) establishes a connection between your device and computer, while Fastboot is a more advanced command-line utility for flashing and modifying Android devices.

You can download the ADB and Fastboot Binaries (Platform-Tools) here.

Download Xiaomi USB Drivers

You’ll need the appropriate USB drivers to connect your Poco F3 and your computer successfully. These drivers enable file transfers, flashing, and other operations between your devices.

You can download the official Xiaomi USB drivers here.

Unlock the Bootloader of Your Phone:

Unlocking the bootloader of your Xiaomi Poco F3 is essential before you can install any custom ROM. Make sure to follow Xiaomi’s official instructions for unlocking the bootloader. Unlocking the bootloader will wipe your device, so back up your data beforehand.

Install TWRP Recovery:

You must install TWRP Recovery on your phone to install any custom ROM on your device. After unlocking the bootloader, follow our guide to install TWRP Recovery on your Poco F3.

Download Android 15 ROM:

You can download the Android 15 custom ROMs for the Xiaomi Poco F3 from the links below:

CrDroid OS	Development Page
Lineage OS 22.1	Development Page

Download Android 15 Gapps:

Currently, there are no specific GApps packages officially released for Android 15. However, based on community feedback, NikGApps for Android 14 seems to be a reliable alternative. You can try using the NikGApps Core package from the Android 14 version to flash onto your Android 15 custom ROM.

You can download the NikGApps Core for Android 14 from the following link: Download NikGApps Core for Android 14

This package should provide the basic Google services, including the Play Store, on your Android 15 device. Since this is a workaround, there may be some compatibility issues, but it’s worth trying until an official Android 15-compatible GApps package is available.

Make sure to flash it right after the ROM installation during the TWRP installation process, and don’t forget to check for updates to GApps periodically.

Warning!

GetDroidTips is not responsible for any issues that may happen to your device if you flash it on another device and brick it. Do it at your own risk.

Instructions To Install:

Connect your device to the PC via a USB cable. Make sure USB Debugging is enabled.
Then, go to the platform-tools folder, type CMD in the address bar, and hit Enter. This will launch the Command Prompt.
Execute the below command in the CMD window or enter recovery mode using the Volume and Power button combination to boot your device to TWRP Recovery:
```
adb reboot recovery
```
Now head to the Install section and navigate to the downloaded vendor and firmware. Perform a right swipe to flash it.TWRP Home
If you want Google Apps as well, you need to flash it at this instance. Go to Install, select the GApps ZIP file, and perform a right swipe to flash this file.
When that is done, you may reboot your device. Head over to Reboot and select System.

The first boot after installing a custom ROM may take a bit longer than usual, so don’t panic if it seems slow. After the device boots, you will need to set it up as a new device, just like when you first got it.

Conclusion

If you’re eager to try the latest Android 15 OS on your Xiaomi Poco F3, flashing this custom AOSP build is the way to go. While it is unlikely that the Poco F3 will receive an official Android 15 update from Xiaomi, this custom ROM will give you access to most of Android 15’s features and updates. However, as with any custom ROM, you might encounter some bugs or stability issues, so it’s a good idea to report them to the relevant XDA forum.

That’s all for this guide. We hope it helped you successfully install Android 15 on your Poco F3. If you have any questions or run into any issues, feel free to leave a comment below. Good luck!