Download and Install AOSP Android 14 on Xiaomi Poco M3

On this page, we provide a step-by-step guide on how to install the unofficial Android 14 Custom ROM on the Xiaomi Poco M3, codenamed “citrus.” If you’re looking to install the pure version of Android 14, then you’re in the right place.

Poco officially pulled the curtains of their latest M series smartphone, the Poco M3. It was launched officially on the 24th of November, but most of the specifications of the smartphone were already leaked or twitted out by the company before the release. This was a highly anticipated device in the budget segment as the M series from Poco is very well taken, specifically by the Indian demographic.

Xiaomi Poco M3 Overview

The smartphone features a 6.53 inch IPS LCD with an FHD+ resolution and an aspect ratio of 19.5:9. This is not a high refresh rate panel like some other Poco devices. Under the hood, we have the mid-range Qualcomm Snapdragon 662 which comes with the Adreno 610 GPU. This is not a blazing fast processor by any means, but it can handle most tasks quite easily. It is one of the most widely used processors for mid-range or budget Android devices.

At the back, we get a dual-tone design with one tone holding the triple camera setup. Here, we get a 48 MP primary sensor with an f/1.8 lens, a 2 MP macro sensor with an f/2.4 lens, and a 2 MP depth sensor with an f/2.4 lens. The primary comes with phase detection autofocus for better focus speeds. As for the front side, we get a single 8 MP sensor with an f/2.1 lens. It is housed in a water drop style at the top.

We get two storage variants with the Poco M3 with only a single RAM option: 4GB+64GB and 4GB+128GB. In terms of connectivity, we do get all the basics, Wi-Fi 802.11, Bluetooth 5.0, GPS, Infrared port, FM radio, and USB Type-C 2.0. But the most striking features of the device are its huge 6,000mAh battery and dual speaker setup for stereo. It supports fast charging of up to 18W and one can even charge other devices using the Poco M3, that is it even doubles up as a power bank for other devices. We get three color options with this smartphone: Cool Blue, Poco Yellow, and Power Black.

Android 14 and Its Features

Android 14, Google’s fourteenth major iteration and the 21st version of its renowned operating system, was unveiled to the public on October 4. The pioneering devices graced with this fresh release were the Pixel 8 and Pixel 8 Pro, underscoring Google’s commitment to keeping its flagship devices at the technological forefront.

This latest installment boasts a plethora of enhancements and innovative features. Among the standout additions are a revamped lock screen, a more intuitive system share sheet, and a redesigned battery-saving mode. Users can also delight in the convenience of drag-and-drop capabilities during app switches, a groundbreaking Ultra HDR support for media, and the visually striking Material You-themed settings toggles. With AI-generated wallpapers and a new monochromatic theme, Android 14 not only refines functionality but also offers a refreshed aesthetic experience.

What’s Working and Known Bugs:

Whats working?

Wi-Fi
RIL
Volte
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
Fingerprint
FM radio
Sound
vibration

Known issues ?
* Hotspot may lag out when trying to turn it off

How To Install AOSP Android 14 on Poco M3 (citrus)

As the title indicates, this article provides the necessary steps and requirements to install the AOSP Android 14 build on the Poco M3 (citrus) model.

Before diving into the guide, please ensure you’ve met all the prerequisites listed below.

Pre-Requisites

Before we begin this procedure, I strongly recommend you create a backup of your device storage and all your files stored on your device. Moreover, following the steps mentioned in this post carefully is advised to avoid permanent damage or bricking your device.

Charge Your Phone

It’s highly recommended to charge your handset before unlocking the bootloader to avoid your device from shutting down occasionally while going through the process. Keep at least 50% of the charge or higher for a smooth operation.

Download ADB and Fastboot Binaries

You can skip this adb and fastboot part if you have already installed TWRP Recovery on your Poco M3.

Using the ADB and Fastboot commands (platform-tools), you can boot your Android device into the bootloader mode (download mode), making it easy for you to proceed with further steps. ADB (Android Debug Bridge) creates a connection or bridge between the device and the computer to sideload files.

Fastboot is a more advanced command utility tool for Android devices that works with computers. You can download ADB and Fastboot Binaries (Platform-Tools).

Download Xiaomi USB Drivers

To create a strong and successful connection between a mobile device and a computer using a USB data cable, you will need a USB Driver. It is essentially a set of files that enables you to transfer files between the connected devices, flash files on the handset, and much more.

It is important to note that USB drivers can be utilized and operated by mobile devices and other external devices on a Windows computer. These include but are not limited to mice, keyboards, printers, external hard drives, speakers, and USB flash drives. If you need to download Xiaomi USB drivers, you can find them here.

Unlock the Bootloader of Your Phone:

You need to unlock the Poco M3’s bootloader before installing custom ROMs.

Install TWRP Recovery:

You must install TWRP Recovery on your phone to install any custom ROM on your device. After unlocking the bootloader, follow our guide to install TWRP Recovery on your Poco M3.

Download Android 14 ROM:

You will find all the Android 14 custom ROMs for your Poco M3 (citrus) here.

Paranoid Android	Download link
CherishOS	Download link
CrDroid OS	Download link
DerpFest ROM	Download link

Download Android 14 Gapps:

Most third-party AOSP ROMs, also known as aftermarket firmware, do not include preinstalled Google apps. You can manually install Android 14 GApps with our guide.

Warning!

GetDroidTips won’t be responsible for any issue that may happen to your device if you flash it on another device and brick it. Do it at your own risk.

Instructions To Install:

Connect your device to the PC via a USB cable. Make sure USB Debugging is enabled.
Then head over to the platform-tools folder, type in CMD in the address bar, and hit Enter. This will launch the Command Prompt.
Execute the below command in the CMD window or enter recovery mode using the Volume and Power button combination to boot your device to TWRP Recovery:
```
adb reboot recovery
```
Now head to the Install section and navigate to the downloaded vendor and firmware. Perform a right swipe to flash it.TWRP Home
If you want Google Apps as well, you need to flash it at this instance. Go to Install, select the GApps ZIP file, and perform a right swipe to flash this file.
When that is done, you may reboot your device. Head over to Reboot and select System.

The installation of AOSP Android 14 on Poco M3 is complete, and your device will now boot with the newly installed OS. It’s worth noting that the first boot may take some time, and you may need to set up your device from scratch. With that, our guide to installing AOSP Android 14 on Poco M3 comes to an end.

Conclusion

If you want to try out the latest Android OS version on your Poco M3, flashing the ported Android 14 is an option. Although it seems like the Poco M3 won’t receive the official Android 14 update from the manufacturer, you can still enjoy most of the features and visual treatment with this ported version. However, if you encounter any bugs or stability issues, it’s important to report them to the respective forum.

That’s it, guys. We assume this guide was helpful to you. For further queries, you can comment below.