Download and Install AOSP Android 14 on Samsung Galaxy Note 10 and Note 10 Plus

On this page, we provide a step-by-step guide on how to install the unofficial Android 14 Custom ROM on the Samsung Galaxy Note 10 and Note 10 Plus, codenamed “d1/d2s/d2x.” If you’re looking to install the pure version of Android 14, then you’re in the right place.

Samsung Galaxy Note 10 Overview

The Galaxy Note 10 comes with a 6.3″ FHD+ Dynamic AMOLED Infinity-O display with 2280×1080 pixels resolution quality. The display is protected with Corning Gorilla Glass and HDR10+ compatible. It’s powered by the Samsung Exynos 9825 SoC and the US/China region users will get Snapdragon 855 chipset variant. Similarly, the global variants will have Mali-G76 MP12 GPU while the Snapdragon variant comes with Adreno 640 GPU. It offers an 8GB of RAM with 256GB of internal storage for the 4G LTE model only and the 12GB RAM with 256GB internal storage will be for 5G model only.

This time Samsung has provided the improved S Pen with Bluetooth, up to 10 hours of standby timing, IP68 certified. The front features a single 10MP Selfie Camera with Dual Pixel AutoFocus, F/2.2 lens, etc. While the rear packs a triple 16MP Ultra-Wide + 12MP Wide-angle + 12MP Telephoto lens along with an LED flash, PDAF, HDR, Dual OIS, F/1.5-F/2.4 lens, HDR10+ recording, etc.

The handset comes with a 3,500 mAh battery with Super Fast charging, Wireless charging 2.0, and Wireless PowerShare options. It has Wi-Fi 802.11 a/b/g/n/ac/ax (2.4/5GHz), Bluetooth 5.0 LE, ANT+, USB Type-C, NFC, 5G/4G LTE, GPS, Galileo, GLONASS, etc as the connectivity options. The Note 10 runs on Android 9.0 Pie on the top of One UI out-of-the-box. Meanwhile, the handset packs Ultrasonic Fingerprint sensor, Accelerometer, Barometer, Gyroscope sensor.

Android 14 and Its Features

Android 14, Google’s fourteenth major iteration and the 21st version of its renowned operating system, was unveiled to the public on October 4. The pioneering devices graced with this fresh release were the Pixel 8 and Pixel 8 Pro, underscoring Google’s commitment to keeping its flagship devices at the technological forefront.

This latest installment boasts a plethora of enhancements and innovative features. Among the standout additions are a revamped lock screen, a more intuitive system share sheet, and a redesigned battery-saving mode. Users can also delight in the convenience of drag-and-drop capabilities during app switches, a groundbreaking Ultra HDR support for media, and the visually striking Material You-themed settings toggles. With AI-generated wallpapers and a new monochromatic theme, Android 14 not only refines functionality but also offers a refreshed aesthetic experience.

What’s Working and Known Bugs:

Whats working?

Wi-Fi
RIL
Volte
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
Fingerprint
FM radio
Sound
vibration

Known issues ?
* Hotspot may lag out when trying to turn it off

How To Install AOSP Android 14 on Galaxy Note 10/10 Plus (d1/d2s/d2x)

As the title indicates, this article provides the necessary steps and requirements to install the AOSP Android 14 build on the Galaxy Note 10/10 Plus (d1/d2s/d2x) model.

Before diving into the guide, please ensure you’ve met all the prerequisites listed below.

Pre-Requisites

Before we begin this procedure, I strongly recommend you create a backup of your device storage and all your files stored on your device. Moreover, following the steps mentioned in this post carefully is advised to avoid permanent damage or bricking your device.

Charge Your Phone

It’s highly recommended to charge your handset before unlocking the bootloader to avoid your device from shutting down occasionally while going through the process. Keep at least 50% of the charge or higher for a smooth operation.

Download ADB and Fastboot Binaries

You can skip this adb and fastboot part if you have already installed TWRP Recovery on your Galaxy Note 10/10 Plus.

Using the ADB and Fastboot commands (platform-tools), you can boot your Android device into the bootloader mode (download mode), making it easy for you to proceed with further steps. ADB (Android Debug Bridge) creates a connection or bridge between the device and the computer to sideload files.

Fastboot is a more advanced command utility tool for Android devices that works with computers. You can download ADB and Fastboot Binaries (Platform-Tools).

Download Samsung USB Drivers

To create a strong and successful connection between a mobile device and a computer using a USB data cable, you will need a USB Driver. It is essentially a set of files that enables you to transfer files between the connected devices, flash files on the handset, and much more.

It is important to note that USB drivers can be utilized and operated by mobile devices and other external devices on a Windows computer. These include but are not limited to mice, keyboards, printers, external hard drives, speakers, and USB flash drives. If you need to download Samsung USB drivers, you can find them here.

Unlock the Bootloader of Your Phone:

You need to unlock the Galaxy Note 10/10 Plus’s bootloader before installing custom ROMs.

Install TWRP Recovery:

You must install TWRP Recovery on your phone to install any custom ROM on your device. After unlocking the bootloader, follow our guide to install TWRP Recovery on your Galaxy Note 10/10 Plus.

Download Android 14 ROM:

Download all the Android 14 custom ROMs for your Galaxy Note 10/10 Plus (d1/d2s/d2x) are here.

PixelOS	XDA Development Page
Lineage OS 21	XDA Development Page

Download Android 14 Gapps:

Most third-party AOSP ROMs, also known as aftermarket firmware, do not include preinstalled Google apps. You can manually install Android 14 GApps with our guide.

Warning!

GetDroidTips won’t be responsible for any issue that may happen to your device if you flash it on another device and brick it. Do it at your own risk.

Instructions To Install:

Connect your device to the PC via a USB cable. Make sure USB Debugging is enabled.
Then head over to the platform-tools folder, type in CMD in the address bar, and hit Enter. This will launch the Command Prompt.
Execute the below command in the CMD window or enter recovery mode using the Volume and Power button combination to boot your device to TWRP Recovery:
```
adb reboot recovery
```
Now head to the Install section and navigate to the downloaded vendor and firmware. Perform a right swipe to flash it.TWRP Home
If you want Google Apps as well, you need to flash it at this instance. Go to Install, select the GApps ZIP file, and perform a right swipe to flash this file.
When that is done, you may reboot your device. Head over to Reboot and select System.

The installation of AOSP Android 14 on Galaxy Note 10/10 Plus is complete, and your device will now boot with the newly installed OS. It’s worth noting that the first boot may take some time, and you may need to set up your device from scratch. With that, our guide to installing AOSP Android 14 on Galaxy Note 10/10 Plus comes to an end.

Conclusion

If you want to try out the latest Android OS version on your Galaxy Note 10/10 Plus, flashing the ported Android 14 is an option. Although it seems like the Galaxy Note 10/10 Plus won’t receive the official Android 14 update from the manufacturer, you can still enjoy most of the features and visual treatment with this ported version. However, if you encounter any bugs or stability issues, it’s important to report them to the respective forum.

That’s it, guys. We assume this guide was helpful to you. For further queries, you can comment below.