Download Android 12 for Samsung Galaxy J6 Plus SM-J610F, J610G | GSI Build

How to Install Android 12 on Samsung Galaxy J6 Plus

As the title suggests, here we’ve shared the requirements and steps to flash the AOSP Android 12 build on the Samsung Galaxy J6 Plus variant.

Before heading over to the guide, make sure to follow all the requirements below.

Pre-Requisites

Before we begin with this procedure, I would strongly recommend you create a backup of your device storage and all your files stored on your device. Moreover, it is advised to follow the steps mentioned in this post very carefully to avoid permanent damage or to brick your device.

Charge Your Phone

It’s highly recommended to charge your handset before unlocking the bootloader to avoid your device from shutting down occasionally while going through the process. Make sure to keep at least 50% of charge or higher for a smooth operation.

Download ADB and Fastboot Binaries

Using the ADB and Fastboot command (platform-tools), you’ll be able to boot your Android device into the bootloader mode (download mode) which will be easy for you to proceed with further steps. ADB (Android Debug Bridge) creates a connection or bridge between the device and computer to sideload files.

Whereas Fastboot is a more advanced command utility tool for Android devices that works with computers. You can download ADB and Fastboot Binaries (Platform-Tools).

Download Samsung USB Drivers

A USB Driver is a set of files that basically allows you to create a successful and strong connection between a mobile device with a computer properly using a USB data cable. It’ll be useful to transfer files between the connected devices, flash files on the handset, and more.

It’s also worth mentioning that not only mobile devices but also other external devices can use and run USB Drivers on a Windows computer. Such as mouse, keyboard, printer, external hard drives, speakers, USB flash drives, etc. You can grab Samsung USB Drivers here.

Unlock Bootloader Your Phone:

To enjoy any custom ROM, you must first unlock the bootloader on your Samsung smartphone.

Download Android 12 ROM:

Here, you will find all the Android 12 custom ROM for your Samsung Galaxy J6 Plus. To find which version to download, you must first check which processor your device is running, whether ARM, ARM64, or x86.

phhusson AOSP 12.0

Download Link

Download Android 12 Gapps:

It’s worth mentioning that most of the third-party AOSP (Android Open Source Project) ROMs (also known as aftermarket firmware) come without any preinstalled Google apps package. You can manually install the Android 12 GApps by following our guide.

Instructions to Install:

• First, you’ll need to perform a factory reset on your Samsung Galaxy J6 Plus. [You can also reboot to Recovery mode and perform factory reset]
• Keep in mind that OEM Unlock and USB Debugging are already enabled on your phone. If not, do that too.
• We assume that you’ve already installed the ADB & Fastboot Tool on your PC.
• Now, transfer the downloaded Android 12 GSI file to your computer and extract it. Make sure to copy and paste the system.img and vbmeta.img files into the ADB & Fastboot folder for ease.
• Simply connect your Android device to the PC/Laptop by using the USB cable and authorize the device (if prompted).
• Now, launch a command prompt on your PC from the extracted GSI folder by typing cmd in the address bar and pressing the Enter button on your keyboard.
• Restart your device into bootloader mode or fastboot mode by typing the following command in the command prompt and pressing the Enter key:

adb reboot bootloader

• This will reboot your phone into Fastboot mode.
• Then you’ll have to disable Android Verified Boot (AVB) by running the command below:

fastboot flash vbmeta vbmeta.img

• Next, type in the following command and hit the Enter button to delete the existing system partition on your device:

fastboot erase system

• Use the following command to install the Android 12 GSI package:

fastboot flash system system.img

• The installation process will start and will take some time. So, wait for it.
• Once the installation process is done, you will need to enter the following command to wipe the user data partition:

fastboot -w

• Finally, restart your device by executing the command below:

fastboot reboot

• Enjoy! The first boot may take some time after the OS upgrade. Now, your Samsung Galaxy J6 Plus should boot into the Android 12 system successfully.

Conclusion

Flashing the ported Android 12 on your Samsung Galaxy J6 Plus will give an early taste of the latest Android OS version. It looks like the Samsung Galaxy J6 Plus model won’t gonna receive the Android 12 update officially from the manufacturer. So, it’s a good idea to get most of the features and visual treatment. However, if you find any extra bugs or stability issues then you should report them to the respective forum.

That’s it, guys. We assume this guide was helpful to you. For further queries, you can comment below.